You could look at the current C value from a ps command.
You might need to check the column it is sorting on (I'm assuming the fourth) This should sort the processes based on what is busy that the moment. It's a little hit-and-miss I agree, but it can help. As a process is actually running, the counter gets incremented. When it is idle or swapped out it slowly reduces. This way, the process scheduler can determine which process is next in line so busy processes get (in theory) pushed out a little if the system is busy.
Of course processes will run as fast as they can, so they may get swapped in & out frequently. The trick is to run this a few times and compare the output. A process with a consistently high C value is busy - and you'll probably see the CPU time clocking up too.
How are you measuring your CPU use? If you just use something like:-
... then the first (and only) line is the average since last boot. If the server has been very busy for a very long time, then that figure can be skewed. Can you post some sample stats and the commands you are getting them with? The tail end of the output from my ps command may help us to. Make sure you sanitise them if need be. We have plenty of users who start Oracle connections specifying the user/password on the command line for everyone to see.
To check the columns and their order, use:-
I hope that this helps,
Robin
Liverpool/Blackburn
UK
Last edited by rbatte1; 06-26-2013 at 11:56 AM..
Reason: Added questions
Dear friends,
please tell me how to find the files which are existing in the current directory, but it sholud not search in the sub directories..
it is like this,
current directory contains
file1, file2, file3, dir1, dir2
and dir1 conatins
file4, file5
and dir2 contains
file6,... (9 Replies)
I have three files a.txt , b.txt , c.txt in a directory called my_dir1 .These files were created before two or three months . I have a tar file called my_tar1.tar which contains three files a.txt , b.txt , d.txt . Somebody untarred the my_tar1.tar into my_dir1 directory. So existing two files were... (1 Reply)
I have high values (such as ˙˙˙˙) in a text file contained in an Unix AIX server. I need to identify all the records
which are having these high values and also get the position/column number in the record structure if possible. Is there
any Unix command by which this can be done to :
1.... (5 Replies)
Hi,
I have line in input file as below:
3G_CENTRAL;INDONESIA_(M)_TELKOMSEL;SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL
My expected output for line in the file must be :
"1-Radon1-cMOC_deg"|"LDIndex"|"3G_CENTRAL|INDONESIA_(M)_TELKOMSEL"|LAST|"SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL"
Can someone... (7 Replies)
I want to list all files/lines which except those which contain the pattern ' /proc/' OR ' /sys/' (mind the leading blank).
In a first approach I coded:
find / -exec ls -ld {} | grep -v ' /proc/| /sys/' \; > /tmp/list.txt
But this doesn't work. I got an error (under Ubuntu):
grep:... (5 Replies)
Hello everyone
Sorry I have to add another sed question. I am searching a log file and need only the first 2 occurances of text which comes after (note the space) "string " and before a ",". I have tried
sed -n 's/.*string \(*\),.*/\1/p' filewith some, but limited success. This gives out all... (10 Replies)
I have a bunch of random character lines like ABCEDFG. I want to find all lines with "A" and then change any "E" to "X" in the same line. ALL lines with "A" will have an "X" somewhere in it. I have tried sed awk and vi editor. I get close, not quite there. I know someone has already solved this... (10 Replies)
How to use "mailx" command to do e-mail reading the input file containing email address, where column 1 has name and column 2 containing “To” e-mail address
and column 3 contains “cc” e-mail address to include with same email.
Sample input file, email.txt
Below is an sample code where... (2 Replies)
These three finds worked as expected:
$ find . -iname "*.PDF"
$ find . -iname "*.PDF" \( ! -name "*_nobackup.*" \)
$ find . -path "*_nobackup*" -prune -iname "*.PDF"
They all returned the match:
./folder/file.pdf
:b:
This find returned no matches:
$ find . -path "*_nobackup*" -prune... (3 Replies)
Discussion started by: wolfv
3 Replies
LEARN ABOUT DEBIAN
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)