06-25-2013
unless there are better suggestions ...
try adding those lines into /etc/profile ... that way they are automatically run upon login ...
This User Gave Thanks to Just Ice For This Post:
8 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hi, i was installing solaris 8 on sunfire v250 and the power fails :mad: , now it does not boot from cd rom and get the next msg:
ð
Sun Fire V120 (UltraSPARC-IIe 648MHz), No Keyboard
OpenBoot 4.0, 512 MB memory installed, Serial #56338483.
Ethernet address 0:3:ba:5b:a8:33, Host ID: 835ba833.
... (1 Reply)
Discussion started by: agustincm
1 Replies
2. AIX
We have a RS6000, model B50, type 7046, where I installed AIX 4.3.3
But, if the power goes off, the operating system does not restart,
and I have to go there and push the button to start AIX again.
Is there any way this procedure to be avoided,
this is, I want the AIX to start automatically... (9 Replies)
Discussion started by: sebastia.net
9 Replies
3. Boot Loaders
Hello,
I have kubuntu on my laptop and now I decided to switch to Windows 7. I made the bios settings properly (first choice is boot from cd\vd) but I see the error
" reboot and select proper Boot device or insert Boot media in select Boot device and press a key "
I have tried CD and... (0 Replies)
Discussion started by: rpf
0 Replies
4. UNIX for Dummies Questions & Answers
hi power went out. next day unix sco wont boot up error code 303. any help appreciated as we are clueless. (11 Replies)
Discussion started by: fredthayer
11 Replies
5. AIX
Hello,
I installed PowerVM IVM Virtual I/O on P-550 but later found out that the machine isn't activated for CoD VET code for virtualization.
So when booted , it goes into OPEN Firmware
I/O Hosting requires a hosting partition boot not permitted exit called
> ok
Panel shows > IO... (3 Replies)
Discussion started by: filosophizer
3 Replies
6. Cybersecurity
Is TrustedGrub can be setup and boot on Grub2? I am actually trying to setup TrustedGrub-1.1.5 on fedora-16.
How it can be done? (0 Replies)
Discussion started by: Krishan Sethi
0 Replies
7. AIX
Hello Forum,
I am very newbie with AIX.
We have 2 AIX 9111-285 servers. The OS version is 5.3.
After the power outage, they did not come up.
I try to unplug the power cable and re-connect after 1 minutes but do not help.
Both display the same reference code 110000AC on the front panel... (6 Replies)
Discussion started by: lilyn
6 Replies
8. AIX
A team member installed the wrong version of License Code on a Power 740 system used in our Development environment.
The system will no longer boot.
Does anyone have IBM documentation or experience to share on recovering a system that currently reports "Unsupported License Code version... (1 Reply)
Discussion started by: kevinedailey
1 Replies
LEARN ABOUT OPENSOLARIS
root_archive
root_archive(1M) System Administration Commands root_archive(1M)
NAME
root_archive - manage bootable miniroot archives
SYNOPSIS
/boot/solaris/bin/root_archive pack archive root
/boot/solaris/bin/root_archive unpack archive root
/boot/solaris/bin/root_archive packmedia solaris_image root
/boot/solaris/bin/root_archive unpackmedia solaris_image root
DESCRIPTION
The root_archive utility is used to manage bootable miniroot archives and is currently only available on x86 platforms. The utility can
pack and unpack boot/root archives in both ufs and hsfs (iso9660) format. It will always generate ufs archives.
root_archive also uses the lofi file driver to export a file as a block device (see lofi(7D)) and mount to mount or unmount file systems
and remote resources (see mount(1M)). root_archive requires the same privileges that are needed to run these commands.
SUBCOMMANDS
The root_archive command has the following subcommands:
pack archive root Pack from the image found under the root directory to the archive.
unpack archive root
Unpack from the archive to an unpacked image under the root directory.
packmedia solaris_image root
Pack the solaris image to the root directory.
unpackmedia solaris_image root
Unpack the solaris image from the root directory.
For packmedia and unpackmedia, other items that do not go into the ramdisk image are copied or uncopied (see cpio(1)) as well. Specifi-
cally, this includes all the packaging databases needed for pkgadd and the other packaging utilities to succeed which are not used in the
running and hence pruned to conserve memory.
EXAMPLES
Example 1 Unpacking the Solaris x86 install image
The following command unpacks the current Solaris image from the root directory:
# root_archive unpackmedia
/export/nv/solarisdvd.nvx_dvd/latest /export/Boot
Where /export/nv/solarisdvd.nvx_dvd/latest represents a path to a Solaris x86 install image and /export/Boot is a directory that will be
purged or created, as necessary.
Example 2 Packing the Solaris x86 install image
The following command packs the current Solaris image to the root directory:
# root_archive packmedia
/export/nv/solarisdvd.nvx_dvd/latest /export/Boot
EXIT STATUS
The following exit values are returned:
0 The command completed successfully.
1 The command exited due to an error.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Stable |
+-----------------------------+-----------------------------+
SEE ALSO
cpio(1), bootadm(1M), mount(1M), attributes(5), lofi(7D)
SunOS 5.11 26 Sep 2005 root_archive(1M)