I run my raspberry pi with a TP-Link Wlan-USB stick. The stick works out of the box with the pi-modded debian.
But eventhough the automatic connection to one of the saved WLAN-networks in the file /etc/wpa_supplicant/wpa_supplicant.conf works, my PI doesn't request or receive an IP-address (automatically).
I always have to login via ethernet and do a
manually.
Why?
I thought "well, whatever, no problem, I write a cronjob which runs this command every couple of minutes". But this doesn't solve the issue neither...
Please let me know what could be a better solution.
My script (not working when run as cronjob but manually it does):
Howdie everyone...
I have a shell script RemoveFiles.sh
Inside this file, it only has two commands as below:
rm -f ../../reportToday/temp/*
rm -f ../../report/*
My problem is that when i execute this script, nothing happened. Files remained unremoved. I don't see any error message as it... (2 Replies)
Hi,
I have a script that my operators use as a login profile.
As they need to export their display in order to access the GUI of the data protector program in HPUX machine.
Anyone can advise how I can grep (eg. who -r) the dynamically assigned IP address and automatically put it as a variable... (4 Replies)
Hi all,
I have this problem that puzzles me, i have setup all the right DHCP configuration in Windows Server. The reservation IP address in windows for this specific unix terminal. However, when i rebooted the unix terminal the IP which was already assigned for this box somehow change to a total... (0 Replies)
hi
I need a dhcp congfigured to give some of my clients IP regarding their MAC addresses and rest should get any IP from same pool. I am not sure what to add dhcpd.conf to provide such a pool or group or class. I tried with this but seems not good enough.
<<<<dhcpd.conf>>>>
... (2 Replies)
Hello Experts,
I am working on a software that has network client-server architecture. I need to have a mechanism that notifies me upon change of dhcp address change locally or at remote machine. Windows have IP Helper APIs to get address change notification. Is there something similar in Unix?... (3 Replies)
Hi ,
when i configure my server with a fixed ip address in dhcpd.conf as below
subnet 172.21.151.0 netmask 255.255.255.0 {
range 172.21.151.66 172.21.151.66;
}
host switch {
hardware ethernet 00:05:30:02:DB:31;
fixed-address 172.21.151.66;
}
when i start dhcpd server , it... (2 Replies)
we can assign a dynamic and fixed ip address for a dhcp_client through dhcp server ,
if it is dynamic ip address , it would be having lease time and renews after half of the leasetime gets over.
would the same funda applies for fixed ip address to .. i dont think so ... please confirm on the... (3 Replies)
Where can you find your DHCP Server address? I checked all of the files that this mentioned with no luck.
Quick HOWTO : Ch08 : Configuring the DHCP Server - Linux Home Networking (6 Replies)
Hi All,
Could you please explain the purpose of assigning the static IP by using the DHCP Concept. Like by using the clients MAC address we assign the static IP Address. Waiting for your reply. Thanks in Advance. (6 Replies)
Hi All ,
please view the set up below:
-------------------------------------------------------------------
| DHCP Server |-----------| ROUTER & |-----------| Clients |
| 192.168.99.1 | - -<eth1>| DHCP-RELAY|<eth2>-- | 192.168.88.X |
... (2 Replies)
Discussion started by: gdangoor
2 Replies
LEARN ABOUT NETBSD
u3g
U3G(4) BSD Kernel Interfaces Manual U3G(4)NAME
u3g -- USB support for 3G datacards
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
u3ginit* at uhub? port ?
u3g* at uhub? port ?
ucom* at u3g?
DESCRIPTION
The u3g driver provides support for the multiple USB-to-serial interfaces exposed by many 3G USB/PC Card modems.
The device is accessed through the ucom(4) driver which makes it behave like a tty(4).
HARDWARE
The u3g driver supports the following adapters:
o Huawei E220 (E270?)
o Huawei Mobile
o Novatel MC950D
o Option Globetrotter 3G
o Option Globetrotter 3G Fusion (only 3G part, not WLAN)
o Option Globetrotter 3G Fusion Quad (only 3G part, not WLAN)
o Option Globetrotter 3G Quad
o Vodafone Mobile Connect Card 3G
The supported 3G cards provide the necessary modem port for ppp, pppd, or mpd connections as well as extra ports (depending on the specific
device) to provide other functions (diagnostic port, SIM toolkit port).
SEE ALSO tty(4), ubsa(4), ucom(4), usb(4)HISTORY
The u3g driver appeared in NetBSD 5.0. The ubsa(4) manual page was modified for u3g by Andrea Guzzo <aguzzo@anywi.com> in September 2008.
AUTHORS
The u3g driver was written by Andrea Guzzo <aguzzo@anywi.com>. Hardware for testing provided by AnyWi Technologies, Leiden, NL.
BSD June 28, 2010 BSD