Any help would be greatly appreciated, I have Solaris 10 installed on an M5000 SPARC machine. While rebooting it, we are faced with the following message then the OK prompt:
Please help I don't know what to do.
Last edited by abohmeed; 06-10-2013 at 06:01 AM..
Reason: solved
I had a power failure the other day and when my relatively new Solaris 10 machine rebooted it is thrown into maintenance mode.
I've found the following lines in the /var/adm/messages file, I'm assuming this is the root cause of the problem. However, I don't have the slightest idea on how to... (9 Replies)
Hi All,
URGENT - Please help me form a scipt for this:
I need the LATEST file from a dir on REMOTE machine to be SCP'd to a dir on local machine. (and I need to execute this from local server)
I know that the below cmd is used to find the LATEST file from a dir. But this command is not... (3 Replies)
Hi,
I have inherited a Ultra 5 SPARC machine that I need to boot from its CD-ROM. WHen I turn on the machine it just boots to its hard drive. How do I get it to boot from the CD-ROM.
I am a Solaris newbie.... (1 Reply)
Hello
I connected the exp400 & turned on the aix machine which is 7043-150 but now I guess probably ODM is corrupted as it does not boot. Its stuck at 0518 code.
Also, on the console it shows stuck on the kernel, which then it does not want to boot. Is it possible to fix from maintenance... (1 Reply)
I need a shell script to copy files frm a linux machine to a windows machine using SCP. The files keeps changing day-to-day. I have to copy the latest file to the windows machine frm the linux machine.
for example :In Linux, On July 20, the file name will be 20.txt and it should be copied to... (3 Replies)
Hi All..
Am new to Unix!!
Am creating a shell script in which a scenario is like i have transfer the output file from unix machine (Server) to local directory (Windows xp).
And also i have to transfer the input file from the local directory to Unix machine (Server)
Any help from you... (1 Reply)
Hi Am using unix Ksh
Am getting the problem while transferring zero size files through the script .
When i transfer zero size files from local machine to remote machine manually i can able to do it .
My question its beause of zero size files am not able to transfer through script ? or its... (2 Replies)
Hi,
Could you please help me with the below issue..
I'm running RHEL6 OS on both server (192.168.0.10) and client machines (192.168.0.1).
I'm trying to connect to server from the client machine using ftp service.
I have installed vsftpd daemon on both the machines.
I'm getting... (4 Replies)
I want to SSH to 192.168.1.15 Server from my machine, my ip was 192.168.1.99
Source Destination was UP, with IP 192.168.1.15.
This is LAN Network there are 30 Machine's Connected to the network and working fine, I'm Playing around the local machine's because I need to apply the same rules in... (2 Replies)
Team,
Presently i am running a script from my local box(i.e jumpbox) to all the remote machines.Basically fetching basic queries like pwd,mkdir,touch etc and i am able to successfully fetch it from my local machine.But when i want to check certain database related queries like the dbstat... (20 Replies)
Discussion started by: whizkidash
20 Replies
LEARN ABOUT NETBSD
genfb
GENFB(4) BSD Kernel Interfaces Manual GENFB(4)NAME
genfb -- generic framebuffer console driver
SYNOPSIS
genfb* at pci?
genfb* at sbus?
wsdisplay* at genfb?
DESCRIPTION
The genfb driver provides support for generic framebuffers that have no native driver. All it needs are some parameters to describe the
framebuffer and an address.
PCI
When attaching to a pci(4) bus the driver is configured via device properties:
width (uint32)
Width in pixels.
height (uint32)
Height in pixels.
stride (uint32)
Line size in bytes.
depth (uint32)
Bits per pixel.
is_console (bool)
If true, genfb will try to become the system console.
address (uint32)
Bus address of the framebuffer.
SBus
When attaching to sbus(4) all those parameters are retrieved from the firmware.
SEE ALSO pci(4), sbus(4), wscons(4), wsdisplay(4)BUGS
There is no way to change the color map even when the firmware supports it. The pci(4) bus frontend has only been tested on macppc, i386,
and amd64 and requires machine dependent code to pass the properties mentioned above. So far only macppc, i386, and amd64 provides them.
BSD August 23, 2009 BSD