Move os from 1 disk to the other Post: 302810649

9 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

Move a disk to Sol. 2.6

I removed an external Sun disk (with data on it) from an old 2.6 system and added the disk to another 2.6 system. The new system seems to recognize the system (verified by the format command). When try to mount I am getting, I got the error: mount: /dev/dsk/c1t1d0s6 is not this fstype. I...

2. Filesystems, Disks and Memory

Move hard disk to another SCSI host

I was using an external SCSI disk on a Sun Ultra60 (Solaris 7) as the boot device. It was labelled c1t0d0. I then moved it into the internal removable mounts and it should become c0t0d0, but it apparently didn't change properly. When the machine boots, it gets host information from the disk...

3. Solaris

Move root disk to new server

Hi, I need to do an installation where I have identical hardware at both sites and create the installation at one site and take the disk to the other site. Question: Do I need to do anything special for the OS to come up properly? thanks.

4. Solaris

( VxVM ) How to add the removed disk back to previous disk group

Previously , i remove the disk by #vxdg -g testdg -k rmdisk testdg02 But i got error when i -k adddisk bash-2.03# vxdisk list DEVICE TYPE DISK GROUP STATUS c0t0d0s2 auto:none - - online invalid c0t1d0s2 auto:none ...

5. Solaris

Move partition to new disk

Hi, The disks of my servers are getting full and I need to move the /export/home partition on to a new set of disks. I already have 2 mirrored disks and have added 2 more and mirrored them after creating the filesystem on them. Do I just need to edit the /etc/vfstab and point the /export/home...

6. Solaris

ZFS rpool physical disk move

I'd like to finish setting up this system and then move the secondary or primary disk to another system that is the exact same hardware. I've done things like this in the past with ufs and disk suite mirroring just fine. But I have yet to do it with a zfs root pool mirror. Are there any...

7. Filesystems, Disks and Memory

DISK ARRAY PROTECTION SUSPENDED message displayed following disk replacement

Hello, On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active. We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED. ...

8. Linux

Move OS to storage disk

Hi We have RHEL 7.3 running from local disk and we want to move it to storage. I am unable to find any proper procedure to do this activity. Please help.

9. Solaris

Move root disk to new identical hardware

We have in a couple of occasions moved root disk & flashcard in netra 240 to new identical hardware instead of replacing mb in dead server. Flashcard is to preserve mac adresses and mainly hostid for license stuff. Works without doing anything other than poweron & boot. Now we have a similar...

LEARN ABOUT HPUX

vxconfigbackupd

vxconfigbackupd(1M)													       vxconfigbackupd(1M)

NAME

       vxconfigbackupd - disk group configuration backup daemon

SYNOPSIS

       vxconfigbackupd [-l]

DESCRIPTION

       The vxconfigbackupd daemon automatically backs up information about a disk group's new configuration whenever the configuration is changed.

OPTIONS

       -l	 Logs backup daemon activities to the file /etc/vx/cbr/bkdaemonLog.

FILES

       /sbin/init.d/vxvm-recover
		 Startup file for vxconfigbackupd.

       /etc/vx/cbr/bk/dgname.dgid/dgid.dginfo
		 Location of backup file for disk group information.

       /etc/vx/cbr/bk/dgname.dgid/dgid.diskinfo
		 Location of backup file for disk attributes.

       /etc/vx/cbr/bk/dgname.dgid/dgid.binconfig
		 Location of backup file for binary configuration copy.

       /etc/vx/cbr/bk/dgname.dgid/dgid.cfgrec
		 Location of backup file for configuration records in vxprint -m format.

NOTES

       The vxconfigbackup command can be used to back up a disk group's configuration manually at any desired time.

       The  disk  group  configuration	backup and restore utilities do not save any data in the public region. This includes file system or other
       application data that is configured within VxVM objects.

       When a disk group is destroyed, its configuration backup information (including the backup directory) is also removed.  The only  exception
       to this behavior is when the disk group is in the precommit state of restoration.

       The  backup  directory should be large enough to accommodate copies of all the currently imported disk groups. The minimum recommended size
       of the backup directory is P * (N + 1) megabytes, where P is the private region in megabytes (by default, 32MB), and N  is  the	number	of
       disk  groups. The additional P megabytes is required to hold a temporary copy of the disk group configuration when a disk group is imported
       or a configuration change is made.

       The default backup directory is /etc/vx/cbr/bk.	The location of the backup directory can be configured	by  using  the	vxconfigbackup	-l
       backup_directory_path command.

SEE ALSO

       vxconfigbackup(1M), vxconfigrestore(1M)

VxVM 5.0.31.1							    24 Mar 2008 					       vxconfigbackupd(1M)