Sponsored Content
Top Forums UNIX for Dummies Questions & Answers Move os from 1 disk to the other Post 302810643 by Peasant on Wednesday 22nd of May 2013 08:59:06 AM
Old 05-22-2013
If your disk2 is empty, you will need to create a RAID mirror configuration from disk1 and disk2.
If everything goes ok, you will remove the disk1 from mirror configuration and replace the faulty drive and then re-add it to existing mirror.

Depending on your OS and hardware (do you have RAID controller ?) commands will be differenet.
 

9 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

Move a disk to Sol. 2.6

I removed an external Sun disk (with data on it) from an old 2.6 system and added the disk to another 2.6 system. The new system seems to recognize the system (verified by the format command). When try to mount I am getting, I got the error: mount: /dev/dsk/c1t1d0s6 is not this fstype. I... (3 Replies)
Discussion started by: sunshine
3 Replies

2. Filesystems, Disks and Memory

Move hard disk to another SCSI host

I was using an external SCSI disk on a Sun Ultra60 (Solaris 7) as the boot device. It was labelled c1t0d0. I then moved it into the internal removable mounts and it should become c0t0d0, but it apparently didn't change properly. When the machine boots, it gets host information from the disk... (2 Replies)
Discussion started by: Solaris
2 Replies

3. Solaris

Move root disk to new server

Hi, I need to do an installation where I have identical hardware at both sites and create the installation at one site and take the disk to the other site. Question: Do I need to do anything special for the OS to come up properly? thanks. (18 Replies)
Discussion started by: VirginiaSA
18 Replies

4. Solaris

( VxVM ) How to add the removed disk back to previous disk group

Previously , i remove the disk by #vxdg -g testdg -k rmdisk testdg02 But i got error when i -k adddisk bash-2.03# vxdisk list DEVICE TYPE DISK GROUP STATUS c0t0d0s2 auto:none - - online invalid c0t1d0s2 auto:none ... (1 Reply)
Discussion started by: waibabe
1 Replies

5. Solaris

Move partition to new disk

Hi, The disks of my servers are getting full and I need to move the /export/home partition on to a new set of disks. I already have 2 mirrored disks and have added 2 more and mirrored them after creating the filesystem on them. Do I just need to edit the /etc/vfstab and point the /export/home... (1 Reply)
Discussion started by: run_time_error
1 Replies

6. Solaris

ZFS rpool physical disk move

I'd like to finish setting up this system and then move the secondary or primary disk to another system that is the exact same hardware. I've done things like this in the past with ufs and disk suite mirroring just fine. But I have yet to do it with a zfs root pool mirror. Are there any... (1 Reply)
Discussion started by: Metasin
1 Replies

7. Filesystems, Disks and Memory

DISK ARRAY PROTECTION SUSPENDED message displayed following disk replacement

Hello, On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active. We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED. ... (1 Reply)
Discussion started by: terrya
1 Replies

8. Linux

Move OS to storage disk

Hi We have RHEL 7.3 running from local disk and we want to move it to storage. I am unable to find any proper procedure to do this activity. Please help. (4 Replies)
Discussion started by: powerAIX
4 Replies

9. Solaris

Move root disk to new identical hardware

We have in a couple of occasions moved root disk & flashcard in netra 240 to new identical hardware instead of replacing mb in dead server. Flashcard is to preserve mac adresses and mainly hostid for license stuff. Works without doing anything other than poweron & boot. Now we have a similar... (5 Replies)
Discussion started by: stockhes
5 Replies
metaoffline(1M) 					  System Administration Commands					   metaoffline(1M)

NAME
metaoffline, metaonline - place submirrors offline and online SYNOPSIS
/usr/sbin/metaoffline -h /usr/sbin/metaoffline [-s setname] [-f] mirror submirror /usr/sbin/metaonline -h /usr/sbin/metaonline [-s setname] mirror submirror DESCRIPTION
The metaoffline command prevents Solaris Volume Manager from reading and writing to the submirror that has been taken offline. While the submirror is offline, all writes to the mirror will be kept track of (by region) and will be written when the submirror is brought back online. The metaoffline command can also be used to perform online backups: one submirror is taken offline and backed up while the mirror remains accessible. (However, if this is a two-way mirror, data redundancy is lost while one submirror is offline.) The metaoffline command differs from the metadetach command because it does not sever the logical association between the submirror and the mirror. To completely remove a submirror from a mirror, use the metadetach command. A submirror that has been taken offline will only remain offline until the metaonline command is invoked or the system is rebooted. When the metaonline command is used, reading from and writing to the submirror resumes. A resync is automatically invoked to resync the regions written while the submirror was offline. Writes are directed to the submirror during resync. Reads, however, will come from a dif- ferent submirror. Once the resync operation completes, reads and writes are performed on that submirror. The metaonline command is only effective on a submirror of a mirror that has been taken offline. The metaoffline and metaonline commands can not be used on RAID 1 volumes in application-based recovery (ABR) mode. A submirror that has been taken offline with the metaoffline command can only be mounted as read-only. OPTIONS
Root privileges are required for all of the following options except -h. -f Forces offlining of submirrors that have slices requiring maintenance. -h Displays usage message. -s setname Specifies the name of the diskset on which metaoffline and metaonline will work. Using the -s option will cause the com- mand to perform its administrative function within the specified diskset. Without this option, the command will perform its function on local metadevices. mirror Specifies the metadevice name of the mirror from which the submirror will be either taken offline or put online. submirror Specifies the metadevice name of the submirror to be either taken offline or put online. EXAMPLES
Example 1: Taking a Submirror Offline This example takes one submirror, d9, offline from mirror d10. # metaoffline d10 d9 EXIT STATUS
The following exit values are returned: 0 Successful completion. >0 An error occurred. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWmdu | +-----------------------------+-----------------------------+ SEE ALSO
mdmonitord(1M), metaclear(1M), metadb(1M), metadetach(1M), metahs(1M), metainit(1M), metaparam(1M), metarecover(1M), metarename(1M), metareplace(1M), metaroot(1M), metaset(1M), metassist(1M), metastat(1M), metasync(1M), metattach(1M), md.tab(4), md.cf(4), mddb.cf(4), md.tab(4), attributes(5), md(7D) Solaris Volume Manager Administration Guide NOTES
The metaonline and metaoffline commands are not applicable to mirrors in application-based recovery (ABR) mode. SunOS 5.10 12 Apr 2004 metaoffline(1M)
All times are GMT -4. The time now is 06:47 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy