Can you post output of
You should perhaps increase the value of max open files kernel parameter.
Also remember that those parameters can be setuped per user in limits.conf
I've been googling for a while now, trying to forward port 3000 to port 80....
In the past I used to DLink router to forward port 3000 to 80. I recently finished (well, is it ever done anyhow?) setting up my linux box and got it acting as a router.
I want to continue to run Apache on port 80... (1 Reply)
Hi,
I have to install an application that has a built in tftp server. Tftp comes in on port 69. As i am not installing this application as a root user i am running into trouble because only the root user can listen to ports < 1024. So changing the port i listen to to one greater than 1023 isn't... (1 Reply)
Hi,
I've a squirrel mail which is based on a Debian Linux and my Quota is 1.4Gb which is shared between my files and my E-mail. I make a ".forward" file to forward my E-mail to another mail sever (e.g Gmail).
-My first question is if my quota exceeded, what happened to my E-mails. Are they... (2 Replies)
Hi friends
i have the following setup
machine1 two network adapters one connected to lan the other connected directly to machine2
machine2 is not connected to lan
i need to access machine2 directly from the LAN
how to force machine1 to forward all traffic received on a specific port the... (1 Reply)
Hi
I want to set up port forwarding from one network to another network. I already have this configured on the Linux box using iptables.
iptables -t nat -A PREROUTING -p tcp -i eth1 --dport 1521 -j DNAT --to 10.218.146.230
iptables -A FORWARD -p tcp -i eth1 -d 10.218.146.230 -j ACCEPT
... (2 Replies)
Hi Linux/Unix Guru,
I am setting Linux Hopping Station to another different servers.
My current config to connect to another servers is using different port to connect.
e.g
ssh -D 1080 -p 22 username@server1.com
ssh -D 1081 -p 22 username@server2.com
Now what I would like to have... (3 Replies)
Hi,
On my linux server I have 2 routes:
Code:
nexthop via 123.201.254.5 dev eth0 weight 38 nexthop via 111.93.155.149 dev eth2 weight 36
I have a iptable rule like :
iptables -t nat -A PREROUTING -p tcp -i eth0 -d... (5 Replies)
hi guys
i have a simple question !
i have two ips . a valid and internal(172.16.11.2)
i want to use port forwarding to forward any request to valid IP port 8001 to internal ip port 80 .
i use this rule :
sysctl -w net.ipv4.ip_forward=1
iptables -t nat -A PREROUTING -p tcp... (1 Reply)
Hi experts,
We have windows machine ( A ) in one network & 2 Linux Servers ( B & C ) in another network. There is a firewall between these 2 networks and SSH (TCP/22) & HTTPS (TCP/443) are allowed from A to B only (but not to C). There is no personal firewall / iptables running on any machine.... (1 Reply)
Hello All,
I would like to ask you very kindly with /etc/sysconfig/iptables file
I have to setup port forwarding on RHEL6 router. Users from public network must be able to ssh to servers in private network behind RHEL6 router. Problem is that servers in private network must be isolated.
My... (2 Replies)
Discussion started by: oidipus
2 Replies
LEARN ABOUT SUNOS
asadmin-unfreeze-transaction-service
asadmin-unfreeze-transaction-service(1AS) User Commands asadmin-unfreeze-transaction-service(1AS)NAME
asadmin-unfreeze-transaction-service, unfreeze-transaction-service - resumes all suspended transactions
SYNOPSIS
unfreeze-transaction-service --user admin_user [--password admin_password][--host localhost] [--port 4848][--secure|-s] [--passwordfile
filename] [--terse=false] [--echo=false] [--interactive=true]
Resumes all the suspended inflight transactions. Invoke this command on an already frozen transaction. This command is supported in remote
mode only.
OPTIONS --user authorized domain application server administrative username.
--password password to administer the domain application server.
--host machine name where the domain application server is running.
--port port number of the domain application server listening for administration requests.
--secure if true, uses SSL/TLS to communicate with the domain application server.
--passwordfile file containing the domain application server password.
--terse indicates that any output data must be very concise, typically avoiding human-friendly sentences and favoring well-
formatted data for consumption by a script. Default is false.
--echo setting to true will echo the command line statement on the standard output. Default is false.
--interactive if set to true (default), only the required password options are prompted.
Example 1: Using unfreeze-transaction-service
asadmin> unfreeze-transaction-service --user admin --password adminadmin
EXIT STATUS
0 command executed successfully
1 error in executing the command
asadmin-freeze-transaction-service(1AS), asadmin-rollback-transaction(1AS)J2EE 1.4 SDK March 2004 asadmin-unfreeze-transaction-service(1AS)