If you don't know what you want, I have no idea whether what I suggest will succeed. I am guessing that the intent of the pipeline:
is to extract the first 10000*1000 bytes from /var/dump.log and then extract the first 6000*1000 bytes from that. That is equivalent to extracting the first 6000*1000 bytes from /var/dump.log. If you had specified 10000kB and 6000kB, that is what would be done according to the Linux head man page. If you had used 10000K and 6000K, the multiplier would be 1024 instead of 1000 according to the Linux head man page. If the count had been negative in the 2nd call to head, the command line would make more sense since it would then be getting the last 6000*(1000 or 1024) bytes from the first 10000*(1000 or 1024) bytes. But, I can only work with the command line you supplied and guess at the multiplier (or block size) you want. So:
might do what you want. If you want a block size of 1024 instead of 1000, change the bs=1000 to bs=1024.
If wanted the last 6000 blocks of the first 10000 blocks from the file, you could try:
This User Gave Thanks to Don Cragun For This Post:
:mad: I did this the other day but one of my support personnel removed my history so i could call it back up to remeber the exact command since i am air-headed at times. I am trying to take a 30 MEG file off the system and drop it to tape then i want to make the file go back to being 0 bytes so... (1 Reply)
I'm doing a bit of hex editing with dd and I can replace values fairly simply. However, I've run across a situation where I need to delete bytes in the file and I'm not sure how to do that. For example:
Input file has:
1234567890
Output needs to be:
123abc90
I tried this:
printf... (6 Replies)
Hi all,
Does anybody know or guide me on how to remove the first N bytes and the last N bytes from a binary file? Is there any AWK or SED or any command that I can use to achieve this?
Your help is greatly appreciated!!
Best Regards,
Naveen. (1 Reply)
What is the easiest way to inspect the bytes stored in a file?
Ideally, If my file was 10 bytes each of which had only the high bit set, I'd be able to browse for it and get output like this:
01 - 10000000
02 - 10000000
03 - 10000000
04 - 10000000
05 - 10000000
06 - 10000000
07 -... (7 Replies)
Hi Guyz,
I need to capture first N Bytes from the first line of my file.
Eg. If i have following data in File1
414d51204541495052475731202020204a910846230e420c Hello 3621363663212 Help Required
Then, i want the value of first 48 Bytes to be stored in a variable.
That is, variable... (5 Replies)
While running script I am getting an error like
Few lines in data are not being processed.
After googling it I came to know that adding such line would give some memory to it
ini_set("memory_limit","64M");
my input file size is 1 GB.
Is that memory limit is based on RAM we have on... (1 Reply)
Hi,
If I want to copy a 1024 byte data stream in to the target location in 3-bytes chunk, I guess I can use the following script.
dd bs=1024 count=3 if=/src of=/dest
But, I would like to know, how to do it via a C program. I have tried this with memcpy(), that did not help. (3 Replies)
Hello guys. I really hope someone will help me with this one..
So, I have to write this script who:
- creates a file home/student/vmdisk of 10 mb
- formats that file to ext3
- mounts that partition to /mnt/partition
- creates a file /mnt/partition/data. In this file, there will... (1 Reply)
hello,
suppose, entered input is of 1-40 bytes, i need it to be converted to 40 bytes exactly.
example: if i have entered my name anywhere between 1-40 i want it to be stored with 40 bytes exactly.
enter your name:
donald duck (this is of 11 bytes)
expected is as below - display 11... (3 Replies)
Discussion started by: shravan.300
3 Replies
LEARN ABOUT DEBIAN
paps
PAPS(1) General Commands Manual PAPS(1)NAME
paps - UTF-8 to PostScript converter using Pango
SYNOPSIS
paps [options] files...
DESCRIPTION
paps reads a UTF-8 encoded file and generates a PostScript language rendering of the file. The rendering is done by creating outline curves
through the pango ft2 backend.
OPTIONS
These programs follow the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is
included below.
--landscape
Landscape output. Default is portrait.
--columns=cl
Number of columns output. Default is 1.
Please notice this option isn't related to the terminal length as in a "80 culums terminal".
--font=desc
Set the font description. Default is Monospace 12.
--rtl Do right to left (RTL) layout.
--paper ps
Choose paper size. Known paper sizes are legal, letter and A4. Default is A4.
Postscript points
Each postscript point equals to 1/72 of an inch. 36 points are 1/2 of an inch.
--bottom-margin=bm
Set bottom margin. Default is 36 postscript points.
--top-margin=tm
Set top margin. Default is 36 postscript points.
--left-margin=lm
Set left margin. Default is 36 postscript points.
--right-margin=rm
Set right margin. Default is 36 postscript points.
--gutter-width=gw
Set gutter width. Default is 40 postscript points.
--help Show summary of options.
--header
Draw page header for each page.
--markup
Interpret the text as pango markup.
--lpi Set the lines per inch. This determines the line spacing.
--cpi Set the characters per inch. This is an alternative method of specifying the font size.
--stretch-chars
Indicates that characters should be stretched in the y-direction to fill up their vertical space. This is similar to the texttops
behaviour.
AUTHOR
paps was written by Dov Grobgeld <dov.grobgeld@gmail.com>.
This manual page was written by Lior Kaplan <kaplan@debian.org>, for the Debian project (but may be used by others).
April 17, 2006 PAPS(1)