I am facing an issue where sometimes crontab is running script with some delay.
Below is the stmt in script and it is the only stmt in script.
Below is the cron entry.
Below is the time of run each day.
could you please explain any possible reason for this odd behavior.
Thanks
Hi,
I made this script for TRU Unix 5.1 OS based Node.
When the script was run manually all the commands were running properly. But when it was run from Crontab, one command is not running.
This command is not running when the script is running from Crontab:
#... (2 Replies)
I am facing a strange issue while running a script(eg A) from the crontab entry
the script calls one more script(eg B) within it
now when i run the script A manually(with nohup) it also executes the script B (embedded inside it) as expected.
but when i run the script A from the crontab entry... (7 Replies)
Hi all,
I wrote small script for Solaris and when I am running it through command prompt its ok, but when I trying to run it using crontab, i am getting error like:
ld.so.1: dbloader: fatal: libACE.so: open failed: No such file or directory
/tmp/file.sh: line 5: 8304 Killed ... (4 Replies)
Hi,
I'm trying the backup a few information commands of my Check Point FW (it's on a SPLAT linux machine). This is the script I wrote:
#!/bin/bash
cd /var/tmp/
file1=netstat_`/bin/date +%d%m%y`.txt
file2=ifconfig_`/bin/date +%d%m%y`.txt
file3=cpstatos_`/bin/date +%d%m%y`.txt... (2 Replies)
I am trying to use the CRON utility in Fedora 11 & CentOS...
I intend to run a script which pops up a warning message every hour and i made the following entry using "CRONTAB -e "
* * * * * sh /bin/myscript.sh
But this does not seem to be running.
Another thing to note is that,... (4 Replies)
Hi, I posted this in the Solaris forum but I think this one would be more appropriate.
I created a script starting with the following lines:
#!/usr/bin/ksh
flag=n
export flag
typeset -i quant=0
(...)
When running it I'm getting the following 2 errors:
/tmp/tstscript/testfail.ksh:... (9 Replies)
Hi,
I have created the below script,
set -x
# Set the Path of Environment file
ENV_FILE_DIR=/opt/app/p1trp1c1/sybase/ecdwqdm/xrbid/QDM_Prod/bin
LOG_DIR=/opt/app/p1trp1c1/sybase/ecdwqdm/xrbid/QDM_Prod/log
export ENV_FILE_DIR
export LOG_DIR
# Set Audit Environment
. ${ENV_FILE_DIR}/QDM.env... (8 Replies)
Hi All,
I am having the below script to be run from crontab, it it doesnt run.
1 * * * * /home/cobr_ext/test.sh > /home/cobr_ext/temp.txt
when i run i manally it runs without any issues.
Could please help me as to why doesnt it run the script.:( (7 Replies)
Hi guys!
I created a backup script that works fine when I run manually, but when I put a crontab job to execute it the result are not the expected. (not a time problem).
Here is my script:
bash-3.00# cat /bk_tool/backup2.sh
#!/usr/bin/csh
clear
set DIR_HOST='SCP08'
... (3 Replies)
Hi!
I'm using a RaspberryPi with standard Raspbian.
Currently I'm working on some sort of weather station.
For now I have three python scripts - one which is updating txt files for website - update1m.py ( it will not be necessary in few next days so I'll delete it) , second one for updating... (4 Replies)
Discussion started by: bartocham
4 Replies
LEARN ABOUT LINUX
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)