04-11-2013
Some information:
You have Veritas Volume Manager. This is optional software and replaces the LVM shipped with Solaris. A separate license is needed.
Sector errors! One disk is broken. A broken disk cannot be repaired with a file system check (fsck)! But needs to be replaced.
The controller of a broken disk can "hang". This is likely causing the freeze that you encounter.
Some ideas:
A power down (e.g. from the RSC) let the disk stop; then a power up can bring the broken disk to live for some time.
Assuming the disks are mirrored, it will work to pull the defective disk, so the booting must happen from the working disk.
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Hello!
I recently inherited system administration duties for a SUN v880 box. The system has 6 physical hard disks.. In doing some basic maintenance, I found they're configured for mirroring. I ran the metastat and metadb commands, and many of the mirrors are showing they are in need of... (5 Replies)
Discussion started by: ghuber
5 Replies
2. AIX
Hi, I have a AIX 4.3 box here with problems cause of a disk in below VG.
volume group: workvg
lspv
hdisk4 000166789869ab2d workvg
hdisk5 000166789869b96b workvg
now hdisk4 disk has failed and cause the quorum was set, workvg became varied off.
I have to replace the... (2 Replies)
Discussion started by: karthikosu
2 Replies
3. UNIX for Advanced & Expert Users
hi guys,
I've got a strange issue, may be one of you has experienced this.
SunOS 5.10 Generic_118833-33 sun4u sparc SUNW,Sun-Fire-V440
everything is mirrored.
My issue is that I have a umpty directory but seems to have data on. Let me show you
# df -h /data
Filesystem size used... (10 Replies)
Discussion started by: moustik
10 Replies
4. Solaris
Solaris 9
We had a problem server where only root was not mirrored (before my time). When I tried to mirror it, the live root slice bailed with errors at 97% so it couldn't be mirrored.
It's a matched pair of boxes (nfs1 and nfs2) and they are interchangeable with regards to the NFS... (0 Replies)
Discussion started by: BOFH
0 Replies
5. AIX
We have a filesystem which contains 8 hard disks but i am facing disk I/O issue becuase data is not spreading across all the disks.Is there any way i can check how data is spreading and any parameter we need to change to spread ata across all disks.
OS--AIX 5.3 (3 Replies)
Discussion started by: ukatru
3 Replies
6. AIX
We have a filesystem which contains 8 hard disks but i am facing disk I/O issue becuase data is not spreading across all the disks.Is there any way i can check how data is spreading and any parameter we need to change to spread ata across all disks.
OS--AIX 5.3 (1 Reply)
Discussion started by: ukatru
1 Replies
7. Filesystems, Disks and Memory
Good morning,
I seem to be running into an issue with some drives I have attached to my solaris server. The drives are attached correctly, the partitions are arranged with fdisk, the ext3 filesystem is setup using mkfs, and finally the drive is mounted.
When I use xdd to perform read/write... (3 Replies)
Discussion started by: mrpogo07
3 Replies
8. UNIX Desktop Questions & Answers
Issue with disk space usage
I have the following line in my "df -h" output:
Filesystem Size Used Avail Capacity Mounted on
/dev/ad4s1a 496M 495M -39M 109% /
What is the issue with having 9% excess utilisation? How can I find out what this partition is... (2 Replies)
Discussion started by: figaro
2 Replies
9. Solaris
Hi,
More a Sun T5220 problem then a Solaris 10 problem, but perhaps someone had a similar issue.
For starters the output with 1 disk in slot 0 of the server.
It points to PhyNum 5, where I would expect PhyNum 0.
{0} ok probe-scsi
MPT Version 1.05, Firmware Version 1.22.00.00
Target... (2 Replies)
Discussion started by: ejdv
2 Replies
10. Solaris
I have 2 disks in my system.I recently added a zpool to the disk, but today I changed my mind and deleted the zpool ,
zpool destroy -f extra
The zpool is now deleted and I want to partition the disk, so I delete the only partition on the disk.
Now when I run format again,
format... (13 Replies)
Discussion started by: cbtshare
13 Replies
LEARN ABOUT HPUX
vxvmconvert
vxvmconvert(1M) vxvmconvert(1M)
NAME
vxvmconvert - convert LVM volume groups to VxVM disk groups
SYNOPSIS
vxvmconvert
DESCRIPTION
vxvmconvert is a menu-driven program to convert an HP Logical Volume Manger (LVM) configuration to a Veritas Volume Manager configuration.
This man page is a brief overview of vxvmconvert. Refer to the Veritas Volume Manager Migration Guide for a detailed description before
using the conversion procedure.
The vxvmconvert script is interactive and prompts you for responses, supplying defaults where appropriate. There is a Help facility at
every prompt. Enter a question mark (?) at a prompt to display a context-sensitive help message.
With vxvmconvert you can identify LVM volume groups, list disks, analyze volume groups for conversion and complete the conversion of LVM
volume groups to VxVM disk groups.
LVM configurations are converted at the volume group level. All disks used in a volume group are converted together. You cannot use vxvm-
convert to convert unused LVM disks (those not part of an LVM volume group) to VxVM disks. To convert unused LVM disks, use pvremove to
take the disk out of LVM control, then initialize the disk for VxVM use by using vxdiskadm (see pvremove(1M) and vxdiskadm(1M) for more
information).
vxvmconvert changes disks within LVM volume groups to VxVM disks by replacing the areas of the disks used for LVM configuration information
and with the equivalent VxVM volume configuration information. Portions of the disks used for user data, such as file systems and data-
bases, are not affected by the conversion.
The conversion process changes the names by which your system refers to the logical storage, so must be done offline. No applications can
access data in the volume groups undergoing conversion. You must unmount file systems using those volumes and shut down any applications,
such as databases, that might use the volumes directly.
OPERATIONS
Analyze LVM Volume Groups for Conversion
Use this operation to analyze one or more LVM volume groups for conversion to use by VxVM. The analysis checks for problems that
can prevent the conversion from completing successfully. It calculates the space required to add volume group disks to a Volume
Manager disk group. More than one volume group may be entered at the prompt. A grep-like pattern may be used to select multiple
volume groups.
See the ``Limitations in Conversion'' section in the Volume Manager Migration Guide for more information.
Convert LVM Volume Groups to VxVM
Converts one or more LVM volume groups to one or more VxVM disk groups. This adds the disks to a VxVM disk group and replaces
existing LVM volumes with VxVM volumes.
vxvmconvert prompts you to name the VxVM disk group that replaces the LVM volume group being converted. A default is suggested
at the prompt. For example, if you are converting a volume group vg08, vxvmconvert renames it as dg08.
See to the sections ``Dealing with New Logical Volume Names'' and ``Tailoring your VxVM Configuration'' in the Volume Manager
Migration Guide for more information.
Rollback from VxVM to LVM
Rollback reverts VxVM disk groups to LVM volume groups. vxvmconvert provides a limited snapshot capability for the LVM metadata
in a converted volume group. A snapshot is a simple protection method to use during conversion.
Caution! Do not use this operation if the VxVM disk group was modified since the conversion.
See to the section ``Restoring LVM Volume Groups and Disaster Recovery'' in the Volume Manager Migration Guide for more informa-
tion.
List Disk Information
Displays information about the disks on a system. You can obtain detailed information about a disk by entering a specific disk
device address.
List LVM Volume Group Information
Listvg displays a list of LVM volume groups. You can obtain detailed information about an LVM volume group at a specific disk
device address.
SEE ALSO
pvremove(1M), vgcfgbackup(1M), vgrestore(1M), vxdisk(1M), vxdiskadd(1M), vxdiskadm(1M), vxintro(1M)
Veritas Volume Manager Migration Guide
VxVM 5.0.31.1 24 Mar 2008 vxvmconvert(1M)