04-06-2013
VSFTPD slow download outside of LAN
Hello all. I have VSFTP up and ruining on ubuntu 10.04. It works great inside LAN, however when it comes to using it outside i have some problems. If i try to connect from filezila i get the listing and if i try to download it shows it will take forever to receive a file which is larger then 1mb, if one is less its ok. When i try to download from explorer i get time out error. I use passive mode, here is my vsftpd.conf:
listen=YES
anonymous_enable=no
local_enable=YES
write_enable=YES
local_umask=022
dirmessage_enable=YES
xferlog_enable=YES
log_ftp_protocol=yes
pasv_enable=YES
virtual_use_local_privs=YES
pasv_min_port=2000
pasv_max_port=2010
connect_from_port_20=NO
chroot_local_user=YES
secure_chroot_dir=/var/run/vsftpd
pam_service_name=vsftpd-virtual
rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
hide_ids=YES
user_config_dir=/etc/vsftp/vsftpd_user_conf
dual_log_enable=YES
guest_enable=YES
guest_username=ftp
local_root=/var/vsftp
If i switch to active mode it does work with filzilla, but then i cant login wia explorer. Maybe somebody has any ideas?
10 More Discussions You Might Find Interesting
1. Linux
I setup vsftpd.conf as follows and tried to login using root and normal user 'winston' but failed authentication. Any idea what's wrong?
========================
CONTENTS OF /etc/vsftpd/vsftpd.conf
anonymous_enable=NO
local_enable=YES
dirmessage_enable=YES
connect_from_port_20=YES... (3 Replies)
Discussion started by: panggou
3 Replies
2. Solaris
Hi ,
I am trying to configure a private LAN and corporate LAN on the same machien on Solaris 10.
How can I achieve this?
Thanks (1 Reply)
Discussion started by: deedee
1 Replies
3. UNIX for Dummies Questions & Answers
Hi,
I am using VSFTPD.
I have instructed it to send all logging informartion to /var/log/messages.
I would like it to record the names of users who have failed loggin attempts. I have read up on it but have not found out how to do this. Any ideas? (1 Reply)
Discussion started by: mojoman
1 Replies
4. IP Networking
Hello, I've got a FreeBSD 6 server running on my network that I used as a file server for my main computer. However I've really become frustrated with the slow up/down speeds I'm getting, about 100KB/s, which is about as bad as if I was using a "real" server. My setup is as follows:
ISP
|... (4 Replies)
Discussion started by: CyberCat
4 Replies
5. IP Networking
Hi,
We have a website running on a local centos 5.4 surfer, static IP.
The domain.com uses no-ip.com to take care of the DNS, it forwards all to my server.
My router receives the port 80 call, routes it to my server and the world can see domain.com perfectly fine.
However, we cannot see... (3 Replies)
Discussion started by: lawstudent
3 Replies
6. Red Hat
I am facing strange problem regarding hostname on my Linux(2.6.18-164.el5xen x86_64 GNU/Linux), the hostname changes if reboot with lan cable and with NO lan cable
Reboot with lan cable:
The hostname is ubunut
Unable to connect Oracle database using sqlplus some times database is not... (2 Replies)
Discussion started by: LinuxLearner
2 Replies
7. Solaris
I recently configured a WANBoot server on a Ldom 2.0 running Solaris10u9 with ZFS root. When i start the installation form the client with
Ok Boot net - install ,
it takes at least 20-25 minutes just to download the miniroot on the client .. i read there was a bug on T servers firmware... (2 Replies)
Discussion started by: fugitive
2 Replies
8. UNIX for Dummies Questions & Answers
Hi,
I installed debian jessie and friend asked me to install for him vsftpd, of course, first I try at my vps, but I don't get it to work.
there are many tutorials to install ftp server but as i said, it is not working and beside running ftp server, I need for him and some GUI to use it, he is... (2 Replies)
Discussion started by: alanford
2 Replies
9. UNIX for Dummies Questions & Answers
Hello
I am new to linux.
I have recently installed vsftpd in my Centos server. I have set the local_umask=0037.
But now i can't understand how the window users added in a centos server can see each-other folder.
---------- Post updated at 05:59 AM ---------- Previous update was at 05:55 AM... (7 Replies)
Discussion started by: Maham Zahid
7 Replies
10. UNIX for Advanced & Expert Users
:rolleyes:I am trying to setup all certificate based client-server environment in Linux using vsftpd and curl with openssl.
I would like to make a user access with vsftpd certificate and user own client certificate (self-signed) with private/public key.
I don't see google posts about the my plan... (4 Replies)
Discussion started by: gogogo
4 Replies
LEARN ABOUT SUSE
openipmicmd
openipmicmd(1) An IPMI Command Interface openipmicmd(1)
NAME
openipmicmd - An IPMI Command Interface
SYNOPSIS
openipmicmd [-k entry-to-execute] <connection parms>
DESCRIPTION
The openipmicmd program allows a user to execute direct IPMI commands. It can work with direct interface with the OpenIPMI driver or with
IPMI LAN interfaces.
OPTIONS
-k entry-to-execute
Execute a single command an exit.
<connectionparms>
The parameters for the connection depend on the connection type. These are all described in openipmi_conparms (7)
COMMANDS
Once up, you can execute commands in the user interface. Note that commands and responses are asynchronous, you issue a command and the
interface returns immediately. When the response comes back, it will be dumped on your console. That's a little strange looking, but IPMI
is ansychronous underneath. Note that the -k option is synchronous, it will wait for the response or a timeout before returning.
0f lun netfn cmd [data1 [data2 ...]]
Send a command to the BMC you are connected to.
channel [ipmb] IPMB-addr lun netfn [seq] cmd [data1 [data2 ...]]
Send a command to a device on the IPMB bus. The "ipmb" string is optional. The seq must be provided if the netfn is a response (an
odd number). It must be the same sequence number that came in on the command in the "Command Sequence = seq" part of the command.
channel 00 IPMB-addr lun netfn cmd [data1 [data2 ...]]
Send a broadcast command to a device on the IPMB bus.
channel lan handle remote-swid local-swid lun netfn cmd [data1 [data ...]]
Send a command to a device over a LAN channel. Note that this not the same as a LAN connection. This sends a message through a
local BMC to a remote system that is hooked up with a LAN connection.
test_lat count command
Executes the given commands (one of the previous commands) count times and gives the average time per command to execute. Note that
"count" is hexadecimal.
help Display some help.
regcmd netfn cmd
Register to receive the given command. If the driver receives an external command, it will print it out. This only works with sys-
tem interface connections, it will not work on LAN connections.
unregcmd netfn cmd
Remove a command registration.
SEE ALSO
ipmi_ui(1), ipmilan(8), openipmi_conparms(7)
KNOWN PROBLEMS
The asychronous nature of the program can be annoying.
AUTHOR
Corey Minyard <cminyard@mvista.org>
OpenIPMI 05/13/03 openipmicmd(1)