abohmeed,
Have you looked at the zones? Use this command to see all your zones from the Global zone.
If you do not see 0 global then you are logged into a zone. A zone will only list itself. Zones sometimes have limited access to hardware on server. For example if the server has 64 CPUs and 20G RAM the zone may only have access to 2 CPUs and 10G RAM. Look at the Zones and Containes doc from Oracle. To see if the zone setting run this command.
This may help if your trying to see why your having performance issues.
I just installed red hat 7.2 on my laptop. it's dual booted with xp and red hat. when i boot in to linux it boots up to the screen to ask me my name and pass....i put in root and my password. after this it goes to a blue screen and sits there. the after about 2 minutes it comes up with a fatal... (1 Reply)
I have a Red Hat upgrade disk. I installed it and it corrupted my entire hard drive! I had gotten the disks out of a Dummy's book at my local library. Trying to install 'Red Hat', has cost me $100.00 in damages. (The cool part is my friend gave me that $100.00 part) Ah...A 120gig Hard Drive. Just... (3 Replies)
please help me how to install softwares in linux.i have a ethernet internet connection.i try to open the site on LAN to download internet client.but i cannot as our lan supports only internet explorer....i downloaded the linux client by booting thru XP......but i cannot c my NTFS partition thru... (0 Replies)
I'm am working with a Red Hat Enterprise 3 server.
This is a dedicated server that is supposedly dedicated to one domain, but I have been tasked with trying to figure out if there are files on this system that are being accessed by other IP's.
Does anyone know if how I would go about finding... (0 Replies)
I have a pentium IV with 512 MB ram and 80 GB HDD.
I first installed windows XP on the first primary partition, then Solaris on the second with 20 GB for the solaris partition, and when rebooted , the grub menu functioned as expected giving me the options to dual boot, so next I wanted to install... (3 Replies)
I'm wanting to install Solaris 11.1 on a system that already has Windows and Red Hat and a boot system managed by GRUB.
From what I've read, the Solaris 11.1 install will recognize Windows fine and account for it with GRUB 2. But it doesn't mention any other OS.
It talks about installing... (2 Replies)
Hi
We have IPA v3 setup on a Red Hat RHEL6 server and are trying to interface our Solaris servers to it.
There is a slight complication in that we are using krb5 for authentication and IPA as a user and access repository (not sure if that makes a difference). The problem is that we cannot get... (4 Replies)
Discussion started by: gregsih
4 Replies
LEARN ABOUT OPENSOLARIS
native
native(5) Standards, Environments, and Macros native(5)NAME
native - native branded zone
DESCRIPTION
The native brand uses the branded zones framework described in brands(5) to run zones installed with the same software as is installed in
the global zone. The system software must always be in sync with the global zone when using a native brand.
SUB-COMMANDS
The following native brand-specific subcommand options are supported in zoneadm(1M).
attach [-u] [-b patchid]...
For native zones, zoneadm checks package and patch levels on the machine to which the zone is to be attached. If the packages/patches
that the zone depends on from the global zone are different (have different revision numbers) from the dependent packages/patches on
the source machine, zoneadm reports these conflicts and does not perform the attach. If the destination system has only newer dependent
packages/patches (higher revision numbers) than those on the source system, you can use the -u option to update the attached zone to
match the -revision packages and patches that exist on the new system. With -u, as in the default behavior, zoneadm does not perform an
attach if outdated packages/patches are found on the target system.
For native zones, one or more -b options can be used to specify a patch ID for a patch installed in the zone. These patches will be
backed out before the zone is attached or, if -u was also specified, updated.
install [-a archive] | [-d path] [-p] [-s] [-u] [-v] [-b patchid]...
The native brand installer supports installing the zone from either the software already installed on the system or from an image of an
installed system running the same release. This can be a full flash archive (see flash_archive(4)) or a cpio(1) or pax(1) "xustar" ar-
chive. The cpio archive be compressed with gzip or bzip2. The image can also be a level 0 ufsdump(1M), a path to the top-level of a
system's root tree, or a pre-existing zone path.
With no options the zone is installed using same software as is running the global zone.
To install the zone from a system image either the -a or -d is required. Either the -u or -p option is also required in this case.
-a archive
The path to a flash_archive(4), cpio(1), or pax(1) "xustar" archive, or a level0 ufsdump(1M), of an installed system. cpio archives
may be compressed using gzip or bzip2.
-b patchid
One or more -b options can be used to specify a patch ID for a patch installed in the system image. These patches will be backed
out during the installation process.
-d path
The path to the root directory of an installed system. If path is a hyphen (-), the zonepath is presumed to be already populated
with the system image.
-p
Preserve the system configuration after installing the zone.
-s
Install silently.
-u
Run sys-unconfig(1M) on the zone after installing it.
-v
Verbose output from the install process.
ATTRIBUTES
See attributes(5) for a description of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWzoneu |
+-----------------------------+-----------------------------+
|Interface Stability |Uncommitted |
+-----------------------------+-----------------------------+
SEE ALSO cpio(1), pax(1), zlogin(1), zonename(1), sys-unconfig(1M), ufsdump(1M), zoneadm(1M), zonecfg(1M), flash_archive(4), attributes(5),
brands(5), privileges(5), zones(5), lx_systrace(7D)SunOS 5.11 13 Feb 2009 native(5)