If your using the ILOM GUI you can mount the ISO. Do you know how to get the remote console from the GUI?
Any way in the console window. On the menu bar go to Devices -> CD-ROM Image. Then you will get a window asking for the location. Just select it and your ready to boot to the cd-rom. Just reboot the server and the run the command
just like chilinski said.
Hi all,
I've this problem:
I want to install Solaris 10 on Sun Enterprise 450 but when I type "boot cdrom - install" command from OK PROMPT I read this message.
"Can't open input device". I attempt to change "cdrom" with its "alias", after to have typing "devalias" command, but nothing!
... (6 Replies)
Hi,
I have a DVD burned iso image of Solaris 10 for x86 and trying to install it on an PowerSpec PC with 2 - DVD drives. The DVD image won't boot from the top DVD drive so I put it in the second one and it boots. The installation gets to the following prompt:
"You may need to manually eject the... (2 Replies)
Hi all,
I just found out I will need to start learning solaris at work. I downloaded Solaris and want to install it as a VM. The install ISO was about 2GB and I didn't see any options not to install the GUI. Is there a way to do the install so I only boot to the console and not install any of... (4 Replies)
Hello to everyone,
I am new to linux and I want to move to this system after bad experiences with windows.
I have also a particular problem. An old laptop is probably able to handle just linux at this point of its life.
The cdrom is gone, the bios doesn't have usb boot support, there is no... (6 Replies)
:confused:Hi
This was installed on the Linux box a few weeks back by a guy that no longer works for us. All worked fine until last week. Now when we connect its just a blank screen with no icons.
I get a whole bunch of errors when starting the service too:
Tue Feb 23 14:29:45 2010
... (1 Reply)
Hi all
Can anybody offer any help with installing Openserver 6 on a Supermicro server?
I am familiar with installing OS5, but this is my first time with v6.
The PC is fitted with Supermicro X8DTL-I Dual Xeon motherboard and 2 Xeon E5620 processors, and 16Gb Ram, LSI MegaRaid SAS8708 8 port... (11 Replies)
hi
i cant recovery root passwd through serial console mode by using CDROM.. i tried following step but no luck
in ok prompt :
ok boot cdrom -s it comes single user mode
i check format cmd it showing disk
c1t0d0
c1t2d0 then
#mount /dev/dsk/c1t0d0s0 /a
#cd /a
# vi /etc/shadow ( it... (13 Replies)
Installing SCO 6.0.0 on a Supermico server. Has an LSI 9240-8i MegaRaid SAS controller using the megasas drivers. Created a driver diskette and it loads the drivers in first part of install OK. When all drivers are loaded it starts the installation process and it hangs with the "... verify (cdrom)"... (4 Replies)
Hi,
For installing aix on power series , do i need to install hmc first?
or i can connect hmc after?
Rgs, (7 Replies)
Discussion started by: prpkrk
7 Replies
LEARN ABOUT FREEBSD
conscontrol
CONSCONTROL(8) BSD System Manager's Manual CONSCONTROL(8)NAME
conscontrol -- control physical console devices
SYNOPSIS
conscontrol [list]
conscontrol mute on | off
conscontrol add | delete console
conscontrol set | unset console
DESCRIPTION
The conscontrol utility is used to examine and modify the physical devices which back the virtual console devices. If no arguments (or only
the list command) are specified, the current console settings are shown.
There are two types of logical consoles; a high level console which is represented by /dev/console, and a low level console. The low level
console is used for kernel printf(9) and ddb(4) debugger support, while the high level console is used by user programs like syslogd(8).
Multiple device support is implemented only for the low level console; the high level console is set to the first device in the console list.
Multiple console support may be invoked by passing the kernel the -D flag from the boot loader, or by using conscontrol to change the list of
console devices after the system has booted.
The following options are available:
add | delete console
Add or delete a physical device from the logical console. The device must support low-level console operations. Adding a device
will place it at the front of the list of console devices; the first device is used for the high level console.
The console argument is the name of a console device in /dev; the name of the directory may be omitted.
mute on | off
Change the state of console muting. All console output is suppressed when console muting is on.
set | unset console
Set or unset the virtual console. When unset, output from the system, such as the kernel printf(9), always goes out to the real main
console. When set, it goes to another. This is an interface to the tty ioctl TIOCCONS.
SEE ALSO sio(4), syscons(4), tty(4), vt(4), boot(8), loader(8)HISTORY
The conscontrol utility first appeared in FreeBSD 5.0.
AUTHORS
Jonathan Lemon
BSD April 14, 2011 BSD