i have a small simple perl that i cant make it work it is really stupid but i cant find solution and i needed fast.
im trying to copy running to startup on a cisco router and show me the output like is ok
Destination filename [startup-config]?
Building configuration...
[OK]
so the code i have is
and the problem i have is that when it uses the command "copy running-config startup-config" it have to use another input "Enter" to continue and that is my problem here ... it can't continue because i have to use this command "Destination filename [startup-config]? "
sorry for bad English
---------- Post updated at 06:11 AM ---------- Previous update was at 05:25 AM ----------
Hi friends i have a script "backup.sh" which is stored in "/var/lib/pgsql" directory.
I want it to run as a cron so that it executes every time the system starts.
I tried the follwing method
I logged in as the root user and typed "crontab -e"
The file was completly blank so i put the... (3 Replies)
All
Please help, i will telnet to router to obain the ping status and compare, if higher than normal latency, i will have further action..
if i do the telent and in perl script then ....
e.g the result i obtain from the router will be =' Success rate is 100 percent (5/5), round-trip... (4 Replies)
Hi Experts,
I am using perl to telnet on cisco boxes. We have this stupid cisco node which does not support "terminal Length0" command.
Since I am using Net::Telnet and capturing output with
@output = $telnet->cmd('cmd');
Say
@output = $telnet->cmd('show version');
Now problem... (2 Replies)
Hi,
I would like to know in which file I can get the option of enabling/disabling of running fsck on particular file system.
As I know in /etc/filesystems these parameter should be there just like in Linux /etc/fstab
I have created file system aix test but unable to find the option of... (1 Reply)
Hi, I am using scientific linux with is a red hat cloning.
I have written a script and I want it to be run during startup before the user log in.
How do I do that?
I know that there is some connection to the run level and the directory /etc/rc.d.
But I don't know how exactly to do it ?... (4 Replies)
Hey everyone,
I have a few question.
1. Is it possible to display cisco 'show run' output command to the application ??
2. And is there any ways to log in to the router instead of using telnet from telnet application???
Thanks in advance (0 Replies)
Hi all
i have little problem finding solution about simple telnet script .... i have 250 routers and on some i have different password and on some they ask just for password no username. So for example 1,2,3 have username and password (user,password) 4, and 5 have different username and password... (0 Replies)
I am having check.sh script and check.service which I include to /etc/systemd/system/
chmod 744 /usr/local/bin/check.sh
chmod 664 /etc/systemd/system/check.service
systemctl daemon-reload
systemctl enable check.servicecheck.sh:
websockify 5555 localhost:7000 &
date >... (9 Replies)
Discussion started by: tomislav91
9 Replies
LEARN ABOUT DEBIAN
router.db
router.db(5) File Formats Manual router.db(5)NAME
router.db - rancid group configuration file
DESCRIPTION
router.db contains information for devices which are members of a rancid group. control_rancid(1) reads this file to compile a list of
devices which it should collect.
SYNTAX
One device is listed per-line, where the syntax is:
<device_name>:<device_type>:<state>[:comments]
For example:
scooby.shrubbery.net:cisco:up
The fields are as follows:
<device_name>
The name of the device, which must resolve via gethostbyname, used as the argument to telnet(1), rsh(1), or ssh(1), to connect to
the device. Once converted to lower-case, this also becomes the name of the file used to store the configuration under
$BASEDIR/<group>/configs.
Experience has shown that using the device's FQDN (Fully Qualified Domain Name) works best, as in the example above.
<device_type>
The type of device from the set:
agm A Cisco Anomaly Guard Module (aka Riverhead). Suspect that at some point the UI will become more cisco-like and it can be
merged with the IOS rancid module.
alteon An Alteon WebOS switches.
arista An Arista Networks device.
avocent
An Avocent Cyclades console server.
baynet A Bay Networks router.
cat5 A Cisco catalyst series 5000 and 4000 switches (i.e.: running the catalyst OS, not IOS).
cisco A Cisco router, PIX, or switch such as the 3500XL or 6000 running IOS (or IOS-like) OS, but not IOS-XR.
cisco-nx
A Cisco Nexus switch/router.
cisco-xr
A Cisco device running IOS-XR.
css A Cisco content services switch.
enterasys
An enterasys NAS. This is currently an alias for the riverstone device type.
erx A Juniper E-series edge router.
extreme
An Extreme switch.
ezt3 An ADC-Kentrox EZ-T3 mux.
f5 A F5 BigIP switch.
force10
A Force10 router.
fortigate
A Fortinet firewall.
foundry
A Foundry router, switch, or router-switch. This includes HP Procurve switches that are OEMs of Foundry products, such as
the HP9304M.
hitachi
A Hitachi router.
hp A HP Procurve switch such as the 2524 or 4108 procurve switches. Also see the foundry type.
juniper
A Juniper router.
mikrotik
A Mikrotik router.
mrtd A host running the (Merit) MRTd daemon.
netscalar
A Netscalar load balancer.
netscreen
A Netscreen firewall.
procket
A Procket router.
redback
A Redback router, NAS, etc.
riverstone
A Riverstone NAS or Cabletron (starting with version ~9.0.3) router.
smc A SMC switch (some Dell OEMs).
tnt A Lucent TNT.
zebra Zebra routing software.
<state>
The state is either "up", or some other arbitrary value, e.g. "down". If the device is not marked "up" the device's configuration
will not be collected. It is highly recommended that comments are made for any router not listed as up, so as to indicate the
reason a router is not to be polled, e.g.:
dial1.paris:cisco:up:
core1.paris:cisco:down:in testing until 5/5/2001.
core2.paris:cisco:ticketed:Ticket 6054234, 5/3/2001
border1.paris:juniper:up:
The script "downreport" in util/ can be used to produce a report of routers in router.db that are not marked "up".
[comments]
Freeform string to describe the current state of the router.
A ``#'' at the beginning of a line is a comment; the entire line is ignored.
If a device is deleted from the router.db file, then rancid will clean up by removing the device's config file from
$BASEDIR/<group>/configs. The device will be removed from the revision control system. It is possible, in most cases, to resurrect or
check-out copies of deleted device configurations.
FILES
$BASEDIR/<group>/router.db
Configuration file described here, where <group> is a device group name defined in the variable LIST_OF_GROUPS within
$BASEDIR/etc/rancid.conf.
SEE ALSO control_rancid(1), rancid(1), rancid.conf(5)
24 April 2011 router.db(5)