Hi All
I've been having a lot of errors logged on the Cisco Catalyst (4000 series) which one of my Solaris servers is patched into. I have a feeling they are duplex related, but I'm a bit stuck as to how to confirm that.
How do I:
1. Check the duplex settings on my eri0 card?
2. Set the... (3 Replies)
Yesterday i had a situation that cause me headache for a while , I have a web server running win2k3 it has 2 NIC's
one of them assigned to public area network
and the other is not functioning
The place where the server is ,
is messy and cables on the floor so any one can stumble with ... (2 Replies)
Evening,
I am attempting to change the speed and duplex settings on a single interface on a bge card on an m3000 SPARC server. Currently the settings are as follows:
bge0 link: up speed: 1000 Mbps duplex: full
bge1 link: up speed: 100 Mbps ... (13 Replies)
Hi,
How to find whether the server is running with half duplex or full duplex. I tried with the following command ndd -get /dev/ but am not getting any output,. Is the command correct?
Also let me know how to change from half to full duplex. (1 Reply)
Hi Gurus,
I had downloaded the below script from the net and used it to get the Link and duplex settings in my Sun servers.
In all except one(Sol-5.10 on X86) i am getting output format like below:
root: /var/ADMIN/bin/speed_duplex.sh
Interface Speed Duplex
--------- ... (2 Replies)
Hello, Newbie question on scripting - I'm looking to create a simple script that will work on RHEL5 that will adjust the network settings: ip address, default gateway, and subnet mask. If anything else needs to be done (service network stop / start) or should be done to make settings active - I... (4 Replies)
The pro help!
Write a shell script setup for linux security policies include:
1. login (username and password login).
2. add, delete your username and password.
3. firewall.
Note: Write a shell script file as follows:
If login successful then
Step 2.
If step 2 succeeds (ie add,... (1 Reply)
Hi
I do a very simple monitoring of our OpenLDAP (runs in cronjob and generate alerts if unsuccessfull)
$ ldapsearch -h hostname.domain -D "cn=monitor_user,ou=People,dc=organisation" -w "password" -b "dc=organisation" -x "(&(cn=monitor_user)(ou=People))" dn | grep -v version
dn:... (4 Replies)
I have make an menu in which first option is to start and second is to stop the services
echo "Please enter the appropriate choice for doing the operations"
echo "
1) STOP Services
2) START Services
case $choice in
1)
... (1 Reply)
Discussion started by: punpun66
1 Replies
LEARN ABOUT FREEBSD
txp
TXP(4) BSD Kernel Interfaces Manual TXP(4)NAME
txp -- 3Com 3XP Typhoon/Sidewinder (3CR990) Ethernet interface
SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:
device txp
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
if_txp_load="YES"
DESCRIPTION
The txp interface provides access to the 10Mb/s and 100Mb/s Ethernet networks via the 3Com Typhoon/Sidewinder chipset.
Basic Ethernet functions are provided as well as support for vlan(4) tag removal and insertion assistance, receive ip(4), tcp(4), and udp(4)
checksum offloading, and transmit ip(4) checksum offloading. There is currently no support for transmit tcp(4) or udp(4) checksum offload-
ing, tcp(4) segmentation, nor ipsec(4) acceleration.
When a txp interface is brought up, by default, it will attempt to auto-negotiate the link speed and duplex mode. The speeds, in order of
attempt, are: 100Mb/s Full Duplex, 100Mb/s Half Duplex, 10 Mb/s Full Duplex, and 10 Mb/s Half Duplex.
The txp supports several media types, which are selected via the ifconfig(8) command. The supported media types are:
media autoselect
Attempt to autoselect the media type (default)
media 100baseTX mediaopt full-duplex
Use 100baseTX, full duplex
media 100baseTX [mediaopt half-duplex]
Use 100baseTX, half duplex
media 10baseT mediaopt full-duplex
Use 10baseT, full duplex
media 10baseT [mediaopt half-duplex]
Use 10baseT, half duplex
HARDWARE
The txp driver supports the following cards:
o 3Com 3CR990-TX-95
o 3Com 3CR990-TX-97
o 3Com 3cR990B-TXM
o 3Com 3CR990SVR95
o 3Com 3CR990SVR97
o 3Com 3cR990B-SRV
SEE ALSO altq(4), arp(4), inet(4), intro(4), ip(4), miibus(4), tcp(4), udp(4), vlan(4), ifconfig(8)HISTORY
The txp driver first appeared in OpenBSD 2.9.
BSD January 26, 2012 BSD