i have several lines in a file that looks like this:
i'm monitoring this file for strings that contain FAILURE. but i've been getting a lot of alerts that just aren't actionable. so i need another way around this.
each line has an IP and a port number, which is what i bolded above. i'm wondering, is there a way to do something like this:
if 10 or more entries for any specific IP are found in the log, AND each of the entry is for different port numbers, then alert?
my problem is, there isn't a list of known IPs or ports. any IP can be thrown in the file. so i'm curious if what i'm thinking is possible? i'm guessing awk can be used for this?
i was using a variation of this command to get a count:
and i was using this to show me the actual offending lines from the file:
Hi,
I have a file that contains 1400 lines similar to the one shown below:
NAME=sara, TOWN=southampton, POSTCODE=SO18777, EMAIL=sara@hotmail.com, PASSWORD=asjdflkjds etc etc (note: this is one line).
Each line has the same fields, but on each line they are in a different order. Eg. the line... (2 Replies)
I have return files from a process that has then original input record followed on the next line by a response record..either AA,........... for accepted or EE,.......... for errored.
i.e
11,new,123
AA,accepted
12,exist,443
EE,rejected
13,old,223
AA,accepted
I want to write a small... (4 Replies)
I would like to pull a column from a file and place it in a variable:
The file would look like this:
N.Korea gibberish garbage
S.Korea gibberish garbage
USA gibberish garbage
Iraq gibberish garbage
Canada gibberish garbage
and items in the first... (8 Replies)
I saw a few posts close to what i want to do, but they didn't look like they would work exactly.. or I need to think out of the box on this.
I have a file that I keep server stats in for my own performance analysis. this file has the output from many commands in it (uptime, vmstats, ps, swap... (2 Replies)
I have AIX 5.1
This may sound like a really dumb question but I have never done this before.
I would like to pull a file off a backup tape and put back on the AIX
is this as simple as as doing a
mount /dev/rmt1
then the file name that is on the tape /dump/rpt/xxxxxx
Do I just copy it... (14 Replies)
Hi all,
I am fairly new to scripting, but I do try and script as much as possible but the more advanced stuff does tend to boggle my mind a bit.
I am at a bit of a loss with this one.
I get entries in my DNS logs, like the below:
I want to extract only the IP address, without the hashes... (5 Replies)
Hi,
I have a requirment where I need to pull different columns from a .csv file.
Here is the sample of the csv file.
account,item,flag1,flag2,flag3,flag4,flag5,......feed,tran
I will be have a config.txt file which will have the following information.
item,flag5,flag10,feed,tran... (2 Replies)
Hello all,
I'm working on a general script for something at work. I'm an up-and-comer backup for a Shell Scripter this company has had for 35 years lol. Anyway, I have a config file I'm trying to pull Variables from as the Config File is used for multiple scripts. Does the below make sense and... (7 Replies)
I'm scanning a list of emails- I need to pull 2 pieces of data, then move to the next file:
Sender's Email Address
Email Date
I need these to be outputted into a single column- separated by a ",". Like this:
Email1's Address, Email1's Date Stamp
Email2's Address, Email2's Date Stamp... (4 Replies)
I am connecting to another server through sftp. I am running one batch script to pull file from another server. sometimes i am receiving partial files. I am using below commands in batch script.
ls -ltr new.txt
mget new.txt
bye
The file is of 1 MB only.In most of the cases , i received... (6 Replies)
Discussion started by: srinath01
6 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)