I want to look into a folder to see if there are any folders within it. If there are, I need to check inside each folder to see if it contains a .pdf file
So
If /myserver/myfolder/
contains a folder AND that folder conatins a .pdf file
do X
Else
do Z
I may have multiple folders and... (4 Replies)
Dear Expert,
i have linux box that is running in the windows domain, BUT did not being a member of the domain. as I am not the System Administrator so I have no control on the server in the network, such as modify dns entry , add the linux box in AD and domain record and so on that relevant.
... (2 Replies)
Hi,
I 've a fully loaded M5000 which i would like to partition in 4 domains but i have a concern that since we have only 4 internal disks how can we partition the box in for domains with 2 disks ( mirrored ) in each domain. Should i go ahead with 1 Lun from SAN and 1 internal disk for each of 4... (3 Replies)
Hi i 've a M5000 running 2 domains in my Lab with following hardconf
SPARC Enterprise M5000; Memory_Size:128 GB;
+-----------------------------------+------------+
| FRU | Quantity |
+-----------------------------------+------------+
| MBU_B... (3 Replies)
Hi,
This Sun M5000 currently has a single domain (0) created. Solaris 10 is installed on this domain with some local zones. Now we need to add a secondary hardware domain (1) to this M5000. My question: Can we keep the current OS settings on domain 0 when adding the secondary domain 1?
... (0 Replies)
Hi,
This Sun M5000 currently has a single domain (0) created. Solaris 10 is installed on this domain with some local zones. Now we need to add a secondary hardware domain (1) to this M5000. My question: Can we keep the current OS settings on domain 0 when adding the secondary domain 1?
Thank... (5 Replies)
I took over an M5000 and have a jumper server with a nic to connect to the console IP of an M5000. access via ssh user@ip.
it was working fine, another person can connect remotely on the subnet, but when I ssh,it just hangs and then times out.
so my question is,
any ideas of what I might... (4 Replies)
Discussion started by: rrodgers
4 Replies
LEARN ABOUT OPENSOLARIS
scconf_transp_adap_qfe
scconf_transp_adap_qfe(1M) System Administration Commands scconf_transp_adap_qfe(1M)NAME
scconf_transp_adap_qfe - configure the qfe transport adapter
DESCRIPTION
Note -
Beginning with the Sun Cluster 3.2 release, Sun Cluster software includes an object-oriented command set. Although Sun Cluster software
still supports the original command set, Sun Cluster procedural documentation uses only the object-oriented command set. For more infor-
mation about the object-oriented command set, see the Intro(1CL) man page.
You can configure qfe Ethernet adapters as cluster transport adapters. These adapters can only be used with transport type dlpi.
The qfe Ethernet adapter connects to a transport switch or to another Ethernet adapter on a different node. In either case, the connection
is made through a transport cable.
When a transport switch is used and the endpoints of the transport cable are configured by using scconf, scinstall, or other tools, you are
asked to specify a port name on the transport switch. You can provide any port name, or accept the default, as long as the name is unique
for the switch.
The default is to set the port name to the node ID hosting the adapter at the other end of the cable.
There are no user configurable properties for cluster transport adapters of this type.
SEE ALSO Intro(1CL), clinterconnect(1CL), clnode(1CL), scconf(1M), scinstall(1M), qfe(7d)Sun Cluster 3.2 4 May 2006 scconf_transp_adap_qfe(1M)