EDIT:
Forget it (you did already ) - that was somehow a command for the VIO CLI. A simple lslv -l dprod_0000017 would have done it too. Or as Michael wrote
Last edited by zaxxon; 02-04-2013 at 03:47 AM..
Reason: update to let my wrong info not be uncommented
Does anyone have an idea what this means? hdisk10 is part of vg1. (vg1 has 11 hdisks)
I get this msg every morning @ 5:04 CST
This is the orignal message:
A PROBLEM WAS DETECTED ON Fri Aug 17 03:02:09 PDT 2001 801014
The Service Request Number(s)/Probable Cause or... (2 Replies)
Hi,
Can anyone suggest how I can find out which process is keeping one of my hdisk constantly busy (100%) utilisation, when I ran topas .
Thanks for your feedback
Regards (2 Replies)
When I list the PV's using lspv i see both vpath and hdisk names being listed. I got the info that each vpath is configured for 4 hdisks. Problem is I am not able to add either the hard disks in vpath to the existing non-rootvg. ? need to know the basics of vpath .. (4 Replies)
Hi,
in an environment with svc's and ds8xxx wat disk algorithm should be used and what is the difference here:
I can set the algorithm to Load_balance and to Round_robin (see output below).
some info:
hdisk3 ******** MPIO FC 2145
devices.sddpcm.53.rte 2.2.0.0 COMMITTED ... (1 Reply)
How do you create a dummy hdisk with AIX 6.1? In previous versions, I've used this and works, but now I get this error.
hostname:/:# mkdev -l hdisk57 -c disk -t osdisk -s scsi -p fscsi0 -w 0,10 -d
Method error (/etc/methods/define):
0514-022 The specified connection is not valid.
Any... (2 Replies)
Hi all,
I'm getting some errors on AIX regarding Flashcopy and volume group hard disks.
The script that activates flashcopy showed this errors:
Recreating Flashcopy for lun01_A1
Performing syntax check...
Syntax check complete.
Executing script...
Script execution complete.
SMcli... (1 Reply)
Hi. I found an issue with my appvg present in my server.my server is a single node and not part of hacmp.
pmut3# lspv
hdisk0 00c5c9cf92ebb96a rootvg active
hdisk1 00c5c9cfcf30eee9 appvg
hdisk2 00c5c9cfcf30ef98 ... (5 Replies)
Hi,
Planning to implement script to fetch whether the hdisks are in proper sequence. Need output for incorrect sequence
Correct
#lspv
hdisk0
hdisk1
hdisk2
::::::::::::
hdisk5
Incorrect sequence
#lspv
hdisk0
hdisk6
hdisk7
hdisk10
Any idea pls share (2 Replies)
Some storage/disks have been added to an existing AIX 6.1 server. The admin sent me the list of hdisk#'s for the new disks, but I need the corresponding rhdisk# for the same hdisk. (I know from past experience that the rhdisk that maps to an hdisk is not always the same number. For instance,... (5 Replies)
Discussion started by: sbrower
5 Replies
LEARN ABOUT CENTOS
sane-pie
sane-pie(5) SANE Scanner Access Now Easy sane-pie(5)NAME
sane-pie - SANE backend for PIE, Devcom and AdLib SCSI flatbed scanners
DESCRIPTION
The sane-pie library implements a SANE (Scanner Access Now Easy) backend that provides access to PIE, Devcom and AdLib SCSI flatbed scan-
ners.
At present, the following scanners should work with this backend:
Model: Status
----------------------------
Devcom 9636PRO OK
Devcom 9636S Untested
Devcom 9630S Untested
ScanAce 1236S Untested
ScanAce 1230S Untested
ScanAce II Untested
ScanAce III OK
ScanAce Plus Untested
ScanAce II Plus Untested
ScanAce III Plus Untested
ScanAce V Untested
ScanAce ScanMedia Untested
ScanAce ScanMedia II Untested
ScanAce 630S Untested
ScanAce 636S Untested
JetScan 630 OK
JetScan 636PRO Untested
FILES
/etc/sane.d/pie.conf
The backend configuration file
/usr/lib64/sane/libsane-pie.a
The static library implementing this backend.
/usr/lib64/sane/libsane-pie.so
The shared library implementing this backend (present on systems that support dynamic loading).
SEE ALSO sane(7)CONTACT AND BUG-REPORTS
Please send any information and bug-reports to:
Simon Munton <simon@munton.demon.co.uk>
14 Jul 2008 sane-pie(5)
02-02-2013
) - that was somehow a command for the VIO CLI. A simple lslv -l dprod_0000017 would have done it too. Or as Michael wrote 