01-28-2013
Are you looking for a firewall-router sort of use of the two nics, no just faillover or bandwidth? For that, the routing should take care of it.
9 More Discussions You Might Find Interesting
1. Solaris
I need to add a PCI NIC to a sunblade 100 running solaris 8. Im new to this and was hoping someone could give me some card names and models which will work for this system and has a driver for this sparc system.
thanks (3 Replies)
Discussion started by: meyersp
3 Replies
2. IP Networking
Hi;
I have a UNIX box (SCO 5.0.2) with two (2) NIC cards. One card (NIC1) talks to a network 57.14.65.x/27. The other card NIC2) talks to users on 57.14.103.x and 57.14.105.x with subnet mask of 255.255.0.0. If I set NIC2 to this subnet mask (255.255.0.0) it seems like the NIC traffic is now... (2 Replies)
Discussion started by: texaspanama
2 Replies
3. High Performance Computing
Hello
I have 2 machines with 3 NIC cards.
When I setup veritas, I receive this message:
e1000g1 has an IP address configured on it. It could be a public NIC on ken.
Are you sure you want to use e1000g1 for the first private heartbeat link?
As if e1000g1 should not have an IP address.... (2 Replies)
Discussion started by: melanie_pfefer
2 Replies
4. HP-UX
I am running HP_UX 11.23 with 4 NIC cards (this is our TSM server)
I have 4 subnets we are backing across. trying to keep traffic on their subnets. I only have one route statment should I add more.
route add net 123.99.8.0 netmask 255.255.255.0 123.99.8.254
route add net 123.99.67.0 netmask... (2 Replies)
Discussion started by: myork
2 Replies
5. Red Hat
We have a setup of two nodes which has two NIC cards in each. One is built in and another is D-Link (external NIC card). We are unable to ping to the external NIC cards in both. Eg: Node A has two IPs 192.168.1.10 (eth0) and 192.168.2.10 (eth1) and Node B has two IPs 192.168.1.20 (eth0) and... (3 Replies)
Discussion started by: durgaprasadr13
3 Replies
6. HP-UX
Hello,
I am trying to move an HP UX from one locaion to another. The new location don't have any Fiber switches.
On the back of my server I see 2 RJ 45 for console management the other for networking , the server also has a fiber NIC card. When I disconnec the fiber and want to user regular... (1 Reply)
Discussion started by: ldaliosmane
1 Replies
7. IP Networking
Hi,
What is the best reference that gives in detail on nic cards configuration , assigning multiple ip addresses to a single interface, netlink library etc and all basic stuff at this level..?
Thanks (2 Replies)
Discussion started by: Gopi Krishna P
2 Replies
8. IP Networking
I am new in squid proxy.
My question is how to (and if it's necessary) to set one NIC for inbound traffic (http requests) and one NIC for outbound traffic (http answers)?
Thank you in advance! (4 Replies)
Discussion started by: aixlover
4 Replies
9. Ubuntu
I found an old post that talks about 2 nice cards and it is driven by the IP address .... but I didn't understand it because the 2 people skipped information for me the newbie..
Can someone help me... I have the proxy server setup and I believe I have enabled the 2nd nic card, I just need one... (1 Reply)
Discussion started by: trilju2005
1 Replies
LEARN ABOUT HPUX
map-mbone
map-mbone(1M) map-mbone(1M)
NAME
map-mbone - Multicast Router Connection Mapper
SYNOPSIS
debuglevel] retries] timeout] [multicast-router]
DESCRIPTION
requests the multicast router connection information from the multicast-router, and prints the information to the standard out. sends out
the ASK_NEIGHBORS igmp message to the multicast-router. When the multicast-router receives the request, it sends back its configuration
information. multicast-router can be either an ip address or a system name.
If the multicast-router is not specified, flood mode is on by default and the igmp request message is sent to all the multicast router on
the local network. With flood mode on, when finds new neighbor routers from the replies, it will send the same igmp request to the new
neighbor routers. This activity continues until no new neighbor routers are reported in the replies.
The command line options are:
Sets the level for printing out the debug message. The default is 0,
which prints only error and warning messages. Debug level three prints most the messages.
Sets the retry times to poll the routing daemon for information. The
default is 1.
It specifies the timeout value in seconds for waiting the reply. The
default value is 2 seconds.
Sets the flood mode on. It is the default value when no multicast-router is given on the command line input.
Generates output in GRaphEd format.
Disable DNS lookup for the multicast router names.
The output contains the interface configuration information of the requested router(s). The format for each interface output is:
If there are multiple neighbor routers on one interface, they will all be reported. The neighbor_name will not be printed if the option is
specified on the command line.
The possible values for are:
Neighbors are reached via tunnel.
The tunnel uses IP source routing.
The interface is down.
The interface is administratively disabled for multicast routing.
The local router is the querier of the subnet.
The format of the GRaphEd output is:
If there is no neighbor router on an interface, then a will be put next to the node_name. If there are multiple neighbor routers on one
interface, all of them will be reported. The possible values for are:
The neighbor is reached via tunnel.
The neighbor is on the same network/subnet.
The interface is down.
Please see mrouted(1M) for and
EXAMPLES
Querying for the multicast router connection information.
127.0.0.1 (localhost) [version 3.3]:
193.2.1.39 -> 0.0.0.0 (all-zeros-broadcast) [1/1/disabled]
15.13.106.144 -> 15.255.176.33 (matmos.hpl.hp.com) [10/1/tunnel]
15.13.106.144 -> 15.17.20.7 (hpspddc.vid.hp.com) [10/1/tunnel/down]
Querying for multicast router connectivity with option:
GRAPH "Multicast Router Connectivity: Wed Feb 1 17:34:59 1995"=UNDIRECTED
252537488 {$ NP 1440 1060 $} "hpntc1t.cup.hp.com*"
;
252538974 {$ NP 940 1120 $} "hpntcbs.cup.hp.com"
252537488 "10/1E"
252539807 "1/1P"
;
252539807 {$ NP 1590 1150 $} "hpntc1h.cup.hp.com*"
;
Note
must be run as root.
AUTHOR
was developed by Pavel Curtis.
SEE ALSO
mrouted(1M), mrinfo(1M).
map-mbone(1M)