Maybe boot block is not installed on the second drive?
If it is not installed then boot from cdrom into single user mode and install boot block.
And then try to boot from the second drive.
So last week I posted about my system that will not completely boot. It reports a bad trap and reboots in an endless cycle. I'm at a point where I just want to wipe the system clean, reload the software and basically start from scratch.
I can interrupt the boot cycle and get to an ok prompt.... (2 Replies)
Hi
Im using a Sun blade 1500 with solaris 8 and when the monitor goes to stand by mode, the machine doesnt return to the normal mode anymore. Then i have to reboot it always.
Does anybody have a clue how can i solve it or turn off the stand by mode?
Thanks (2 Replies)
Hello to all!
In the OK prompt, which command should I use to see RAM memory, CPU, and disks partition and capacity?
I have in my hands an ancient Ultra5 machine, which Im trying to install Solaris, but don't know if the configuration is the original one.
Thanks! (4 Replies)
Suppose that I have some data:
12,30
12,45
2,3
7,8
3,9
30, 8
45,54
56,65
Where (a,b) indicates that a is connected to b. I want to get all connected nodes to one point. For instance, the output of the above
example should be something like:
Group 1
2,3
3,9
Group 2
12,30
12,45... (4 Replies)
Hi.
I got this message in our sun station and it stuck
Setting default IPv4 interface for multicast: add net 224.0/4: gateway pecsun22
but i can still telenet the station...
who could i fix this..
appreciate your help (7 Replies)
Hi all,
I was wondering how to change the PS1 to my liking?
I tried changing it using PS1='my choice'
it worked but the subsequent terminals i open will not have it as the default PS1 ,how do i change it?
also i am running as super user, and i need to exec bash, to get the bash environment...... (4 Replies)
Hi,
Due to some changes at our company, we lost the password for the root and sms-svc account on the primary system controller (E25K).
We connected a serial console to the system controller but we never managed to break the session to bring it to the OK prompt.
(tried: ~#, ~ b, ~, , a b,... (9 Replies)
Hi All,
I got a big problem here.
While setting up a sun cluster, I accidentally tried out "bootadm update-archive" as I was unable to bring the cluster up.
After which, i tried a reconfiguration reboot.
Now The system is always booting into maintanence mode with error message... (8 Replies)
how to Change the % prompt to - prompt in unix
:wall:
---------- Post updated at 07:40 AM ---------- Previous update was at 07:38 AM ----------
How To display the last modification time of any file in unix
---------- Post updated at 07:40 AM ---------- Previous update was at 07:40 AM... (2 Replies)
Hi,
on sunfire v890 unable to move from rsc prompt to ok prompt, i have executed the command break. (9 Replies)
Discussion started by: manoj.solaris
9 Replies
LEARN ABOUT OPENDARWIN
installboot
installboot(1M)installboot(1M)NAME
installboot - install bootblocks in a disk partition
SYNOPSIS
installboot bootblk raw-disk-device
The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.
The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
found using the -i option of uname(1).
The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead.
bootblk The name of the bootblock code.
raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read-
able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.
Example 1: Installing UFS Boot Block
To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:
example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk
/dev/rdsk/c1t0d0s0
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
/platform/platform-name/ufsboot
second level program to boot from a disk or CD
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.
11 Apr 2005 installboot(1M)