Hi all! I have a task that has been giving me problems.I have my sister-in-law's external hard drive that has been damaged and the filesystem is not mountable.
I am on a Mac running OSX 10.6.8
Using ddrescue, I recovered the contents and transferred to my external drive:
Upon completion, I tried to mount the image by double-clicking it but received the error:
So I tried using hdiutil:
Success!
So I try to mount:
Error
So I ran Testdisk and got this information:
So here I am debating what to do. I was hoping that someone may have had similar issue or may have some recommendation as to what to do next.
I'm trying to compile and install both most recent version of 'make' and the
most recent version of 'openssh' on my Sparc20.
I've run into the following problems... and I don't know what they mean. Can
someone please help me resolve these issues?
I'm using the 'make' version that was... (5 Replies)
Hi,
I've a Unixware 7.1.4, the machine has 3 disks, the second disk is not mounted, he said the message "WARNING: msgcnt 2 vxfs: mesg 021: vx_fs_init - /dev/dsk/c0b0t1d0s1 file system validation failure".
I use the fsck command to check and repair, during the pocess apears messages to... (3 Replies)
Hi there all,
#!/usr/bin/ksh
Set -x
MIN_MB_FREE="100MB" # Min. MB of Free FS Space
MAX_PERCENT="85%" # Max. FS percentage value
FSTRIGGER="1000MB" # Trigger to switch from % Used to MB Free
WORKFILE="/tmp/df.work" # Holds filesystem data
>$WORKFILE #... (0 Replies)
Hi all,
currently , my root filesystem already reach 90 ++%
I already add more cylinder in the root partition as below
Part Tag Flag Cylinders Size Blocks
0 root wm 67 - 5086 38.46GB (5020/0/0) 80646300
1 swap wu 1 - ... (11 Replies)
Hi,
I wanted to find out that in my database server which filesystems are shared storage and which filesystems are local. Like when I use df -k, it shows "filesystem" and "mounted on" but I want to know which one is shared and which one is local.
Please tell me the commands which I can run... (2 Replies)
Hi guys!
Could you tell me what's the difference of filesystem of Solaris to filesystem of Windows? I need to compare both.
I have read some over the net but it's so much technical. Could you explain it in a more simpler term? I am new to Solaris. Hope you help me guys.
Thanks! (4 Replies)
Dear all,
We are facing prolem when we are going to mount AIX filesystem, the system returned the following error
0506-307The AFopen call failed
: A file or directory in the path name does not exist.
But when we ls filesystems in the /etc/ directory it show
-rw-r--r-- 0 root ... (2 Replies)
I have noticed that after I clear up the /var filesystem, there are always problems.
Does deleting the OLDsyslog.log file cause problems like missing directories and problems accessing crontabs?
There were two situations where I faced problems.
1) Deleted OLDsyslog.log (Of course I created... (5 Replies)
I have a .dmg file which was created from a disk consisting of two partitions. When I mount the dmg both partitions pop up, so I know the imaging worked properly. One partition is HFS+ and the other is FAT32.
So far, I've been unable to find a way to restore the dmg to a flash drive where both... (17 Replies)
Discussion started by: paulcristo
17 Replies
LEARN ABOUT DEBIAN
sys::filesystem::linux
Sys::Filesystem::Linux(3pm) User Contributed Perl Documentation Sys::Filesystem::Linux(3pm)NAME
Sys::Filesystem::Linux - Return Linux filesystem information to Sys::Filesystem
SYNOPSIS
See Sys::Filesystem.
INHERITANCE
Sys::Filesystem::Linux
ISA Sys::Filesystem::Unix
ISA UNIVERSAL
METHODS
version ()
Return the version of the (sub)module.
ATTRIBUTES
The following is a list of filesystem properties which may be queried as methods through the parent Sys::Filesystem object.
fs_spec
Dscribes the block special device or remote filesystem to be mounted.
For ordinary mounts it will hold (a link to) a block special device node (as created by mknod(8)) for the device to be
mounted, like /dev/cdromaXX or aXX/dev/sdb7aXX. For NFS mounts one will have <host>:<dir>, e.g., aXXknuth.aeb.nl:/aXX.
For procfs, use aXXprocaXX.
Instead of giving the device explicitly, one may indicate the (ext2 or xfs) filesystem that is to be mounted by its UUID or volume
label (cf. e2label(8) or xfs_admin(8)), writing LABEL=<label> or UUID=<uuid>, e.g., aXXLABEL=BootaXX or
aXXUUID=3e6be9de-8139-11d1-9106-a43f08d823a6aXX. This will make the system more robust: adding or removing a SCSI disk changes the
disk device name but not the filesystem volume label.
fs_file
Describes the mount point for the filesystem. For swap partitions, this field should be specified asaXXnone. If the name of the mount
point contains spaces these can be escaped asaXX 40.
fs_vfstype
Dscribes the type of the filesystem. Linux supports lots of filesystem types, such as adfs, affs, autofs, coda, coherent,
cramfs, devpts, efs, ext2, ext3, hfs, hpfs, iso9660, jfs, minix, msdos, ncpfs, nfs, ntfs, proc, qnx4, reiserfs, romfs, smbfs,
sysv, tmpfs, udf, ufs, umsdos, vfat, xenix, xfs, and possibly others. For more details, see mount(8). For the filesystems
currently supported by the running kernel, see /proc/filesystems. An entry swap denotes a file or partition to be used for swapping,
cf. swapon(8). An entry ignore causes the line to be ignored. This is useful to show disk partitions which are currently unused.
fs_mntops
Describes the mount options associated with the filesystem.
It is formatted as a comma separated list of options. It contains at least the type of mount plus any additional options
appropriate to the filesystem type. For documentation on the available options for non- nfs file systems, see mount(8). For
documentation on all nfs-specific options have a look at nfs(5). Common for all types of file system are the options
aXXaXXnoautoaXXaXX (do not mount when 'mount -a' is given, e.g., at boot time), aXXaXXuseraXXaXX (allow a user to mount), and
aXXaXXowneraXXaXX (allow device owner to mount), and aXXaXX_netdevaXXaXX (device requires network to be available). The
aXXaXXowneraXXaXX and aXXaXX_netdevaXXaXX options are Linux-specific. For more details, see mount(8).
fs_freq
Used for these filesystems by the dump(8) command to determine which filesystems need to be dumped. If the fifth field is not
present, a value of zero is returned and dump will assume that the filesystem does not need to be dumped.
fs_passno
Used by the fsck(8) program to determine the order in which filesystem checks are done at reboot time. The root filesystem should be
specified with a fs_passno of 1, and other filesystems should have a fs_passno of 2. Filesystems within a drive will be checked
sequentially, but filesystems on different drives will be checked at the same time to utilize parallelism available in the
hardware. If the sixth field is not present or zero, a value of zero is returned and fsck will assume that the filesystem does not
need to be checked.
SEE ALSO
Sys::Filesystem, Sys::Filesystem::Unix, fstab(5)VERSION
$Id: Linux.pm 128 2010-05-12 13:16:44Z trevor $
AUTHOR
Nicola Worthington <nicolaw@cpan.org> - <http://perlgirl.org.uk>
Jens Rehsack <rehsack@cpan.org> - <http://www.rehsack.de/>
COPYRIGHT
Copyright 2004,2005,2006 Nicola Worthington.
Copyright 2009,2010 Jens Rehsack.
This software is licensed under The Apache Software License, Version 2.0.
<http://www.apache.org/licenses/LICENSE-2.0>
perl v5.10.1 2010-05-18 Sys::Filesystem::Linux(3pm)