Hi all! I have a task that has been giving me problems.I have my sister-in-law's external hard drive that has been damaged and the filesystem is not mountable.
I am on a Mac running OSX 10.6.8
Using ddrescue, I recovered the contents and transferred to my external drive:
Upon completion, I tried to mount the image by double-clicking it but received the error:
So I tried using hdiutil:
Success!
So I try to mount:
Error
So I ran Testdisk and got this information:
So here I am debating what to do. I was hoping that someone may have had similar issue or may have some recommendation as to what to do next.
I'm trying to compile and install both most recent version of 'make' and the
most recent version of 'openssh' on my Sparc20.
I've run into the following problems... and I don't know what they mean. Can
someone please help me resolve these issues?
I'm using the 'make' version that was... (5 Replies)
Hi,
I've a Unixware 7.1.4, the machine has 3 disks, the second disk is not mounted, he said the message "WARNING: msgcnt 2 vxfs: mesg 021: vx_fs_init - /dev/dsk/c0b0t1d0s1 file system validation failure".
I use the fsck command to check and repair, during the pocess apears messages to... (3 Replies)
Hi there all,
#!/usr/bin/ksh
Set -x
MIN_MB_FREE="100MB" # Min. MB of Free FS Space
MAX_PERCENT="85%" # Max. FS percentage value
FSTRIGGER="1000MB" # Trigger to switch from % Used to MB Free
WORKFILE="/tmp/df.work" # Holds filesystem data
>$WORKFILE #... (0 Replies)
Hi all,
currently , my root filesystem already reach 90 ++%
I already add more cylinder in the root partition as below
Part Tag Flag Cylinders Size Blocks
0 root wm 67 - 5086 38.46GB (5020/0/0) 80646300
1 swap wu 1 - ... (11 Replies)
Hi,
I wanted to find out that in my database server which filesystems are shared storage and which filesystems are local. Like when I use df -k, it shows "filesystem" and "mounted on" but I want to know which one is shared and which one is local.
Please tell me the commands which I can run... (2 Replies)
Hi guys!
Could you tell me what's the difference of filesystem of Solaris to filesystem of Windows? I need to compare both.
I have read some over the net but it's so much technical. Could you explain it in a more simpler term? I am new to Solaris. Hope you help me guys.
Thanks! (4 Replies)
Dear all,
We are facing prolem when we are going to mount AIX filesystem, the system returned the following error
0506-307The AFopen call failed
: A file or directory in the path name does not exist.
But when we ls filesystems in the /etc/ directory it show
-rw-r--r-- 0 root ... (2 Replies)
I have noticed that after I clear up the /var filesystem, there are always problems.
Does deleting the OLDsyslog.log file cause problems like missing directories and problems accessing crontabs?
There were two situations where I faced problems.
1) Deleted OLDsyslog.log (Of course I created... (5 Replies)
I have a .dmg file which was created from a disk consisting of two partitions. When I mount the dmg both partitions pop up, so I know the imaging worked properly. One partition is HFS+ and the other is FAT32.
So far, I've been unable to find a way to restore the dmg to a flash drive where both... (17 Replies)
Discussion started by: paulcristo
17 Replies
LEARN ABOUT DEBIAN
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)