Sponsored Content
Full Discussion: Solaris Routing
Operating Systems Solaris Solaris Routing Post 302733817 by rbatte1 on Wednesday 21st of November 2012 06:49:06 AM
Old 11-21-2012
Sorry, I didn't notice that only one is listed as UP. On AIX high-availability, the IP address is assigned only when failover is detected, hence my confusion.

I'm not sure that your 172.29.11.x addresses will re-route necessarily. If the service address you are offering is 172.29.12.15, then this should be the address for the default route out. You currently may have clients that target 172.29.12.15, but the return seems to be via 172.29.1.1 using card nge0 on each.

If you, from your own desk open a simple telnet or ssh connection to 172.29.12.15, what does your session show up as with the following:-
Code:
netstat -na | grep <your desk ip address>
netstat -nr | grep <your desk ip address>

I think that your routing may be all going out via nge0 except what is on the local subnet of each of the other cards.

Hopefully, I'm worrying unecessarily, but then I'm a bit stumped where you are getting stuck.


Robin
Liverpool/Blackburn
 

9 More Discussions You Might Find Interesting

1. IP Networking

routing problem in solaris

hi, below is the situation: my server is in 128.10.200.xxx network. i have a solaris computer running in a subnet. this computer got 2 nic card. 1 is 172.18.198.xxx , another 1 is 10.100.xxx.11 there is a machine stick with this computer, ip is 10.100.xxx.12 so, 10.100.xxx.11 and... (3 Replies)
Discussion started by: kyhah
3 Replies

2. Solaris

Basic Solaris static routing

Hi All, :(:confused: I have scoured the web and can't find this anywhere. What I am trying to do is set up a static route through an available gateway on a server, and then test connectivity through TELNET. I have done this on AIX (I already had this procedure). On AIX I would use SMIT. ... (7 Replies)
Discussion started by: jeffpas
7 Replies

3. Solaris

Solaris zone routing table

Does anyone know how to delete a an ip off the routing table ? i tried route delete 10.0.0.0 and gateway but it still comes back. i have 2 zones sharing one interface. help... (4 Replies)
Discussion started by: 23patrick
4 Replies

4. IP Networking

solaris 8 networking routing

hi all, how do i make sure that the new routing should take effect on the os memory right away? what should i run after i add all the new "route add ....". I have an example below: bash-2.03# netstat -rn Routing Table: IPv4 Destination Gateway Flags Ref Use Interface... (1 Reply)
Discussion started by: itik
1 Replies

5. Solaris

Routing problem of Solaris

Hi, I got problem of Sun Solaris 8 routing. IP of SunA is 10.16.64.164, and have routing table: 10.16.64.0 10.16.64.164 U 1 19236 bge1 10.6.0.0 10.6.0.3 U 1 16534 bge0 224.0.0.0 10.6.0.3 U 1 ... (4 Replies)
Discussion started by: milo
4 Replies

6. Solaris

ip routing in solaris

I have a SUN ultra 5 machine running Solaris 6. it has two ethernet interfaces qe0 192.168.0.111 and qe1 192.168.1.111 the two subnets are 192.168.0.111 255.255.255.0 192.168.1.111 255.255.255.0 the specified routes are add route -net 192.168.0.0 255.255.255.0 192.168.0.111 add route... (3 Replies)
Discussion started by: adol65
3 Replies

7. IP Networking

solaris routing between two networks

ce0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 2 inet 10.162.212.132 netmask ffffff00 broadcast 10.162.212.255 ether 0:14:4f:55:82:9 ce1: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 3 inet 10.231.11.232 netmask... (1 Reply)
Discussion started by: busyboy
1 Replies

8. Solaris

solaris routing between two networks

ce0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 2 inet 10.162.212.132 netmask ffffff00 broadcast 10.162.212.255 ether 0:14:4f:55:82:9 ce1: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 3 inet 10.231.11.232 netmask... (3 Replies)
Discussion started by: busyboy
3 Replies

9. UNIX for Advanced & Expert Users

Solaris 10 routing table issues

Hello Hope someone can help with this problem. We are running Solaris 10 with a current kernel patch of 142900-09. We appear to be getting a serious issue with the routing table as shown below: Output from netstat -rnv Destination ....Mask ............Gateway ........Device... (2 Replies)
Discussion started by: gregsih
2 Replies
install-solaris(1M)                                                                                                            install-solaris(1M)

NAME
install-solaris - install the Solaris operating system SYNOPSIS
install-solaris install-solaris invokes the Solaris Install program. Depending on graphical capability and available memory at the time of invocation, install-solaris invokes either a text-based installer or a graphical installer. The following minimum requirements for physical memory dictate which features are available during installation: For SPARC machines: 128 MB Minimum physical memory for all installation types 128 MB Minimum physical memory required for windowing system 384 MB Minimum physical memory required for graphical-based installation For x86 machines: 256 MB Minimum physical memory for all installation types 256 MB Minimum physical memory required for windowing system 512 MB Minimum physical memory required for graphical-based installation In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number of fea- tures available. install-solaris exists only on the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the for more details. install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the installation media. Refer to the for disk space requirements. Refer to the for more information on the various menus and selections. See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcdrom (Solaris instal- | | |lation media) | +-----------------------------+-----------------------------+ |Interface Stability |Evolving | +-----------------------------+-----------------------------+ pkginfo(1), install(1M), pkgadd(1M), attributes(5) It is advisable to exit install-solaris by means of the exit options in the install-solaris menus. 23 Sep 2005 install-solaris(1M)
All times are GMT -4. The time now is 10:50 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy