Hello guys,
It would be so nice of you if someone can provide me with these informations.
1) My SAN group assigned 51G of LUN space to the VIO server.I ran cfgdev to discover the newly added LUN. Unfortunately most of the disks that are in VIO server is 51G. How would I know which is the newly... (3 Replies)
I have a DUAL VIO ( IBM Virtual I/O ) setup on p 570.
Two Vio server ( VIOS ) and many LPAR clients.
VIO ( latest version + service pack + applied the fix ) and AIX 6.1 ML2
When both VIOs are running, and if I turn on a Client LPAR, the LPAR hangs at LED 25b3 for more than 1 hour then it... (2 Replies)
Hello,
I have created mapping of 2 virtual adapters for Lpars using following command:
mkvdev -vdev ipanalyzerlv1 -vadapter vhost11
mkvdev -vdev ipanalyzerlv -vadapter vhost13
The above two commands were succesfull
but when I want to map the third virtual device to the same Lpar than... (3 Replies)
Hi all,
I have the following configuration
2 ds3524 storage disk systems located over 2 locations
2 P720 server located over 2 locations
DS3524 are connected to san switch.
Each vio server has 1 fc adapter attached to a san switch.
per p720 server 2 virtual io servers. Vio 1 has 1 lun... (2 Replies)
Hi All,
Besides the licenses on VIO and LPAR. What's the main difference with the two? I have installed VIO, my manager told me so, because it's like a free hypervisor but I never installed LPAR before. How do you install it? And if you can give more info on the two, that would be great.
... (5 Replies)
Hello,
Lets say for simplicity that I do not use any vlan config inside my server - one lpar group use hea physical port1, another group hea physical port2. Physical port1 configured as vlan1 on external switch, physical port2 as vlan2.
What is the common practice - should I isolate my vios... (0 Replies)
I am trying to install AIX 5.3 on one of the LPARs through VIOS but I get this error 0518
Reference Code Selection
0518 (Time stamp: 12/18/12 12:10:20 AM UTC)
Starting kernel (Time stamp: 12/18/12 12:10:15 AM UTC)
AIX is starting. (Time stamp: 12/18/12 12:10:15 AM... (10 Replies)
Hi,
Just joined to new company with one Power 720 Express (8202-E4C) server and have no much experience with IBM systems.
I am trying to move everything I mentioned to different subnet as required by customer contract (currently sitting on same subnet as company lan). Access to this subnet will... (8 Replies)
Hello,
VIOS 2.2.1.4 using IVM.
I'm trying to extend a virtual disk assigned to a running lpar so that I can expand the lpar's datavg and grow some filesystems for the user.
Storage admin expanded the lun and new size was reflected in VIO right away. I then needed the storage pool to... (2 Replies)
Hi everybody,
I have Power5 server with 4 internal hdisks each of 70Gb.
VIOS server was installed via Virtual I/O Server Image Repository on the HMC.
HMC release - 7.7.0
VIOS rootvg installed on 2 disk(these disks merged to one storage pool during VIOS install process),and 2 others hdisks... (2 Replies)
Discussion started by: Ravil Khalilov
2 Replies
LEARN ABOUT DEBIAN
sdl::gfx::imagefilter
pods::SDL::GFX::ImageFilter(3pm) User Contributed Perl Documentation pods::SDL::GFX::ImageFilter(3pm)NAME
SDL::GFX::ImageFilter - image filtering functions
CATEGORY
TODO, GFX
METHODS
MMX_detect
int gfx_image_MMX_detect() CODE: SDL_imageFilterMMXdetect();
MMX_off
void gfx_image_MMX_off() CODE: SDL_imageFilterMMXoff();
MMX_on
void gfx_image_MMX_on() CODE: SDL_imageFilterMMXon();
add
int gfx_image_add(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length
CODE: RETVAL = SDL_imageFilterAdd(Src1, Src2, Dest, length); OUTPUT: RETVAL
mean
int gfx_image_mean(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length
CODE: RETVAL = SDL_imageFilterMean(Src1, Src2, Dest, length); OUTPUT: RETVAL
sub
int gfx_image_sub(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length
CODE: RETVAL = SDL_imageFilterSub(Src1, Src2, Dest, length); OUTPUT: RETVAL
abs_diff
int gfx_image_abs_diff(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length
CODE: RETVAL = SDL_imageFilterAbsDiff(Src1, Src2, Dest, length); OUTPUT: RETVAL
mult
int gfx_image_mult(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length
CODE: RETVAL = SDL_imageFilterMult(Src1, Src2, Dest, length); OUTPUT: RETVAL
mult_nor
int gfx_image_mult_nor(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length
CODE: RETVAL = SDL_imageFilterMultNor(Src1, Src2, Dest, length); OUTPUT: RETVAL
mult_div_by_2
int gfx_image_mult_div_by_2(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int
length CODE: RETVAL = SDL_imageFilterMultDivby2(Src1, Src2, Dest, length); OUTPUT: RETVAL
mult_div_by_4
int gfx_image_mult_div_by_4(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int
length CODE: RETVAL = SDL_imageFilterMultDivby4(Src1, Src2, Dest, length); OUTPUT: RETVAL
bit_and
int gfx_image_bit_and(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length
CODE: RETVAL = SDL_imageFilterBitAnd(Src1, Src2, Dest, length); OUTPUT: RETVAL
bit_or
int gfx_image_bit_or(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length
CODE: RETVAL = SDL_imageFilterBitOr(Src1, Src2, Dest, length); OUTPUT: RETVAL
div
int gfx_image_div(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length
CODE: RETVAL = SDL_imageFilterDiv(Src1, Src2, Dest, length); OUTPUT: RETVAL
bit_negation
int gfx_image_bit_negation(Src1, Dest, length) unsigned char *Src1 unsigned char *Dest int length CODE:
RETVAL = SDL_imageFilterBitNegation(Src1, Dest, length); OUTPUT: RETVAL
add_byte
int gfx_image_add_byte(Src1, Dest, length, C) unsigned char *Src1 unsigned char *Dest int length unsigned char C
CODE: RETVAL = SDL_imageFilterAddByte(Src1, Dest, length, C); OUTPUT: RETVAL
add_uint
int gfx_image_add_uint(Src1, Dest, length, C) unsigned char *Src1 unsigned char *Dest int length unsigned int C
CODE: RETVAL = SDL_imageFilterAddUint(Src1, Dest, length, C); OUTPUT: RETVAL
add_byte_to_half
int gfx_image_add_byte_to_half(Src1, Dest, length, C) unsigned char *Src1 unsigned char *Dest int length unsigned char
C CODE: RETVAL = SDL_imageFilterAddByteToHalf(Src1, Dest, length, C); OUTPUT: RETVAL
sub_byte
int gfx_image_sub_byte(Src1, Dest, length, C) unsigned char *Src1 unsigned char *Dest int length unsigned char C
CODE: RETVAL = SDL_imageFilterSubByte(Src1, Dest, length, C); OUTPUT: RETVAL
sub_uint
int gfx_image_sub_uint(Src1, Dest, length, C) unsigned char *Src1 unsigned char *Dest int length unsigned int C
CODE: RETVAL = SDL_imageFilterSubUint(Src1, Dest, length, C); OUTPUT: RETVAL
shift_right
int gfx_image_shift_right(Src1, Dest, length, N) unsigned char *Src1 unsigned char *Dest int length unsigned char N
CODE: RETVAL = SDL_imageFilterShiftRight(Src1, Dest, length, N); OUTPUT: RETVAL
shift_right_uint
int gfx_image_shift_right_uint(Src1, Dest, length, N) unsigned char *Src1 unsigned char *Dest int length unsigned char
N CODE: RETVAL = SDL_imageFilterShiftRightUint(Src1, Dest, length, N); OUTPUT: RETVAL
mult_by_byte
int gfx_image_mult_by_byte(Src1, Dest, length, C) unsigned char *Src1 unsigned char *Dest int length unsigned char C
CODE: RETVAL = SDL_imageFilterMultByByte(Src1, Dest, length, C); OUTPUT: RETVAL
shift_right_and_mult_by_byte
int gfx_image_shift_right_and_mult_by_byte(Src1, Dest, length, N, C) unsigned char *Src1 unsigned char *Dest int length
unsigned char N unsigned char C CODE: RETVAL = SDL_imageFilterShiftRightAndMultByByte(Src1, Dest, length, N, C);
OUTPUT: RETVAL
shift_left_byte
int gfx_image_shift_left_byte(Src1, Dest, length, N) unsigned char *Src1 unsigned char *Dest int length unsigned char N
CODE: RETVAL = SDL_imageFilterShiftLeftByte(Src1, Dest, length, N); OUTPUT: RETVAL
shift_left_uint
int gfx_image_shift_left_uint(Src1, Dest, length, N) unsigned char *Src1 unsigned char *Dest int length unsigned char N
CODE: RETVAL = SDL_imageFilterShiftLeftUint(Src1, Dest, length, N); OUTPUT: RETVAL
shift_left
int gfx_image_shift_left(Src1, Dest, length, N) unsigned char *Src1 unsigned char *Dest int length unsigned char N
CODE: RETVAL = SDL_imageFilterShiftLeft(Src1, Dest, length, N); OUTPUT: RETVAL
binarize_using_threshold
int gfx_image_binarize_using_threshold(Src1, Dest, length, T) unsigned char *Src1 unsigned char *Dest int length
unsigned char T CODE: RETVAL = SDL_imageFilterBinarizeUsingThreshold(Src1, Dest, length, T); OUTPUT:
RETVAL
clip_to_range
int gfx_image_clip_to_range(Src1, Dest, length, Tmin, Tmax) unsigned char *Src1 unsigned char *Dest int length unsigned
char Tmin unsigned char Tmax CODE: RETVAL = SDL_imageFilterClipToRange(Src1, Dest, length, Tmin, Tmax); OUTPUT:
RETVAL
normalize_linear
int gfx_image_normalize_linear(Src1, Dest, length, Cmin, Cmax, Nmin, Nmax) unsigned char *Src1 unsigned char *Dest int
length int Cmin int Cmax int Nmin int Nmax CODE: RETVAL = SDL_imageFilterNormalizeLinear(Src1, Dest,
length, Cmin, Cmax, Nmin, Nmax); OUTPUT: RETVAL
convolve_kernel_3x3_divide
int gfx_image_convolve_kernel_3x3_divide(Src, Dest, rows, columns, Kernel, Divisor) unsigned char *Src unsigned char *Dest
int rows int columns Sint16 *Kernel unsigned char Divisor CODE: RETVAL =
SDL_imageFilterConvolveKernel3x3Divide(Src, Dest, rows, columns, Kernel, Divisor); OUTPUT: RETVAL
convolve_kernel_5x5_divide
int gfx_image_convolve_kernel_5x5_divide(Src, Dest, rows, columns, Kernel, Divisor) unsigned char *Src unsigned char *Dest
int rows int columns Sint16 *Kernel unsigned char Divisor CODE: RETVAL =
SDL_imageFilterConvolveKernel5x5Divide(Src, Dest, rows, columns, Kernel, Divisor); OUTPUT: RETVAL
convolve_kernel_7x7_divide
int gfx_image_convolve_kernel_7x7_divide(Src, Dest, rows, columns, Kernel, Divisor) unsigned char *Src unsigned char *Dest
int rows int columns Sint16 *Kernel unsigned char Divisor CODE: RETVAL =
SDL_imageFilterConvolveKernel7x7Divide(Src, Dest, rows, columns, Kernel, Divisor); OUTPUT: RETVAL
convolve_kernel_9x9_divide
int gfx_image_convolve_kernel_9x9_divide(Src, Dest, rows, columns, Kernel, Divisor) unsigned char *Src unsigned char *Dest
int rows int columns Sint16 *Kernel unsigned char Divisor CODE: RETVAL =
SDL_imageFilterConvolveKernel9x9Divide(Src, Dest, rows, columns, Kernel, Divisor); OUTPUT: RETVAL
convolve_kernel_3x3_shift_right
int gfx_image_convolve_kernel_3x3_shift_right(Src, Dest, rows, columns, Kernel, NRightShift) unsigned char *Src unsigned char
*Dest int rows int columns Sint16 *Kernel unsigned char NRightShift CODE: RETVAL =
SDL_imageFilterConvolveKernel3x3ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift); OUTPUT: RETVAL
convolve_kernel_5x5_shift_right
int gfx_image_convolve_kernel_5x5_shift_right(Src, Dest, rows, columns, Kernel, NRightShift) unsigned char *Src unsigned char
*Dest int rows int columns Sint16 *Kernel unsigned char NRightShift CODE: RETVAL =
SDL_imageFilterConvolveKernel5x5ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift); OUTPUT: RETVAL
convolve_kernel_7x7_shift_right
int gfx_image_convolve_kernel_7x7_shift_right(Src, Dest, rows, columns, Kernel, NRightShift) unsigned char *Src unsigned char
*Dest int rows int columns Sint16 *Kernel unsigned char NRightShift CODE: RETVAL =
SDL_imageFilterConvolveKernel7x7ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift); OUTPUT: RETVAL
convolve_kernel_9x9_shift_right
int gfx_image_convolve_kernel_9x9_shift_right(Src, Dest, rows, columns, Kernel, NRightShift) unsigned char *Src unsigned char
*Dest int rows int columns Sint16 *Kernel unsigned char NRightShift CODE: RETVAL =
SDL_imageFilterConvolveKernel9x9ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift); OUTPUT: RETVAL
sobel_x
int gfx_image_sobel_x(Src, Dest, rows, columns) unsigned char *Src unsigned char *Dest int rows int columns CODE:
RETVAL = SDL_imageFilterSobelX(Src, Dest, rows, columns); OUTPUT: RETVAL
sobel_x_shift_right
int gfx_image_sobel_x_shift_right(Src, Dest, rows, columns, NRightShift) unsigned char *Src unsigned char *Dest int rows
int columns unsigned char NRightShift CODE: RETVAL = SDL_imageFilterSobelXShiftRight(Src, Dest, rows, columns,
NRightShift); OUTPUT: RETVAL
align_stack
void gfx_image_align_stack() CODE: SDL_imageFilterAlignStack();
restore_stack
void gfx_image_restore_stack() CODE: SDL_imageFilterRestoreStack();
AUTHORS
See "AUTHORS" in SDL.
perl v5.14.2 2012-05-28 pods::SDL::GFX::ImageFilter(3pm)
11-19-2012
