Create volume using LVM over 2 physical disks Post: 302729329

Sponsored Content

Operating Systems Linux Red Hat Create volume using LVM over 2 physical disks Post 302729329 by ikn3 on Friday 9th of November 2012 12:27:01 PM

11-09-2012

Registered User

The issue was on RHEL 5.5 which is on VMWare

Quote:

Originally Posted by Scott

So, I just added a new disk to my VM (BTW, you didn't say if you have a physical server or a virtual one):

Code:

[root@RH631d ~]# lvmdiskscan
  /dev/ramdisk       [       16.00 MB] 
  /dev/myvg01/mylv01 [       10.00 GB] 
  /dev/ram           [       16.00 MB] 
  /dev/sda1          [       47.03 MB] 
  /dev/myvg01/mylv02 [       10.00 GB] 
  /dev/ram2          [       16.00 MB] 
  /dev/root          [        3.90 GB] 
  /dev/ram3          [       16.00 MB] 
  /dev/sda3          [        1.97 GB] 
  /dev/ram4          [       16.00 MB] 
  /dev/ram5          [       16.00 MB] 
  /dev/sda5          [       14.08 GB] 
  /dev/ram6          [       16.00 MB] 
  /dev/ram7          [       16.00 MB] 
  /dev/ram8          [       16.00 MB] 
  /dev/ram9          [       16.00 MB] 
  /dev/ram10         [       16.00 MB] 
  /dev/ram11         [       16.00 MB] 
  /dev/ram12         [       16.00 MB] 
  /dev/ram13         [       16.00 MB] 
  /dev/ram14         [       16.00 MB] 
  /dev/ram15         [       16.00 MB] 
  /dev/sdb           [       50.00 GB] LVM physical volume
  /dev/sdc           [       50.00 GB] LVM physical volume
  /dev/sdd1          [        2.30 GB] LVM physical volume
  /dev/sdd2          [        1.53 GB] LVM physical volume
  /dev/sdd3          [      784.42 MB] LVM physical volume
  /dev/sde           [       20.00 GB] 
  4 disks
  19 partitions
  2 LVM physical volume whole disks
  3 LVM physical volumes

[root@RH631d ~]# pvcreate /dev/sde
  Physical volume "/dev/sde" successfully created

[root@RH631d ~]# vgcreate VolumeGroup00 /dev/sde
  Volume group "VolumeGroup00" successfully created

[root@RH631d ~]# lvcreate -L5G -n LogicalVolume01 VolumeGroup00
  Logical volume "LogicalVolume01" created

[root@RH631d ~]# lvcreate -L7G -n LogicalVolume02 VolumeGroup00
  Logical volume "LogicalVolume02" created

[root@RH631d ~]# lvcreate -l100%FREE -n LogicalVolume03 VolumeGroup00
  Logical volume "LogicalVolume03" created

[root@RH631d ~]# lvs
  LV              VG            Attr   LSize  Origin Snap%  Move Log Copy%  Convert
  LogicalVolume01 VolumeGroup00 -wi-a-  5.00G                                      
  LogicalVolume02 VolumeGroup00 -wi-a-  7.00G                                      
  LogicalVolume03 VolumeGroup00 -wi-a-  8.00G

No need to fdisk. No need for fancy partitioning. I can now create my filesystems using these three LV's and I don't have to worry about it.

If, later on, I want to extend these filesystems, I can add a new disk, extend the VG, extend the LV, then easily extend the FS. It's hard to do that if you have partitioned everything, absolutely, with fdisk.

ikn3

View Public Profile for ikn3

Find all posts by ikn3

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

physical volume and physical disk.

Hello, I need explanations about physical disks and physical volumes. What is the difference between these 2 things? In fact, i am trying to understand what the AIX lspv2command does. Thank you in advance.

2. UNIX for Dummies Questions & Answers

Physical volume- no free physical partitions

I was in smit, checking on disc space, etc. and it appears that one of our physical volumes that is part of a large volume group, has no free physical partitions. The server is running AIX 5.1. What would be the advisable step to take in this instance?

3. HP-UX

How Can I Create A Volume Group With Two Hard Disks On Hp-ux C-3750

Hello All, I Am A New Member To This Group. I Want To Know How Can We Create Single Volume Group Using 2 Hard Disks. As We Require More Data To Be Stored We Need To Add A Hard Disk,but I Have A Doubt Whether We Can Increase The Size Of A Logical Volume Mounted On A Volume Group By Adding A...

4. UNIX for Advanced & Expert Users

LVM - Extending Logical Volume within Volume Group

Hello, I have logical volume group of 50GB, in which I have 2 logical volumes, LogVol01 and LogVol02, both are of 10GB. If I extend LogVol01 further by 10GB, then it keeps the extended copy after logical volume 2. I want to know where it keeps this information Regards Himanshu

5. AIX

Basic Filesystem / Physical Volume / Logical Volume Check

Hi! Can anyone help me on how I can do a basic check on the Unix filesystems / physical volumes and logical volumes? What items should I check, like where do I look at in smit? Or are there commands that I should execute? I need to do this as I was informed by IBM that there seems to be...

6. Linux

LVM (volume manager) and virtual disks

:eek: Hi guys, I'm pulling my hair out over this one. I am trying to set up a virtual server environment. ( I am using VirtualBox, but I think this is irrelevant to this problem.) I have downloaded a pre-packaged Linux virtual disk, with which I have successfully started a virtual instance of a...

7. AIX

How to determine the physical volume fo the disks

This is the report I got running the comand rptconf, but I would like to know what is the capacity of the disks installed into our server power 6 with AIX System Model: IBM,7778-23X Machine Serial Number: 1066D5A Processor Type: PowerPC_POWER6 Processor Implementation Mode: POWER 6...

8. UNIX for Dummies Questions & Answers

Confusion Regarding Physical Volume,Volume Group,Logical Volume,Physical partition

Hi, I am new to unix. I am working on Red Hat Linux and side by side on AIX also. After reading the concepts of Storage, I am now really confused regarding the terminologies 1)Physical Volume 2)Volume Group 3)Logical Volume 4)Physical Partition Please help me to understand these concepts.

9. AIX

Position of the logical volume on the physical volume

Hello everyone, I just read that while creating a logical volume(LV) we can choose the region of the physical volume (PV) in which the LV should be created. When I say region I mean: outer edge - outer middle - center - inner middle and inner edge. Can anyone help me understand the utility...

10. Red Hat

Physical Volume Create Conundrum

I want to start by saying I already resolved my issue but I want to understand why I am seeing what I am seeing. I have a server with a RAID controller two 500GB drives and six 600GB drives. The two 500GB drives are mirrored and have the OS installed on them. The six 600GB they wanted set as...

LEARN ABOUT V7

vgextend

VGEXTEND(8)						      System Manager's Manual						       VGEXTEND(8)

NAME

       vgextend - add physical volumes to a volume group

SYNOPSIS

       vgextend  [-A|--autobackup  y|n]  [-d|--debug]  [-h|-?|--help] [--restoremissing] [-f|--force] [-t|--test] [-v|--verbose] [ PHYSICAL DEVICE
       OPTIONS ] VolumeGroupName PhysicalDevicePath [PhysicalDevicePath...]

DESCRIPTION

       vgextend allows you to add one or more initialized physical volumes ( see pvcreate(8) ) to an existing volume group to extend it  in  size.
       Moreover,  it  allows  you to re-add a physical volume that has gone missing previously, due to a transient device failure, without re-ini-
       tialising it. Use vgextend --restoremissing to that effect.

       If PhysicalDevicePath was not previously configured for LVM with pvcreate (8), the device will be initialized with the same default  values
       used  with  pvcreate.  If non-default pvcreate values are are desired, they may be given on the commandline with the same options as pvcre-
       ate.  See PHYSICAL DEVICE OPTIONS for available options.  Note that the restore-related options such as --restorefile, --uuid, and --physi-
       calvolumesize are not available.  If a restore operation is needed, use pvcreate (8) and vgcfgrestore (8).

OPTIONS

       See lvm for common options.

PHYSICAL DEVICE OPTIONS

       The  following  options	are  available	for initializing physical devices in the volume group.	These options are further described in the
       pvcreate man page.

       -f, --force

       -y, --yes

       -Z, --zero y|n

       --labelsector sector

       --metadatasize size

       [--metadataignorey|n]

       --pvmetadatacopies copies

       --dataalignment alignment

       --dataalignmentoffset alignment_offset

Examples
       "vgextend vg00 /dev/sda4 /dev/sdn1" tries to extend the existing volume group "vg00"  by  the  new  physical  volumes  (see  pvcreate(8)  )
       "/dev/sdn1" and /dev/sda4".

SEE ALSO

       lvm(8), vgcreate(8), vgreduce(8), pvcreate(8)

Sistina Software UK					 LVM TOOLS 2.02.95(2) (2012-03-06)					       VGEXTEND(8)

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

physical volume and physical disk.

Discussion started by: VeroL

2. UNIX for Dummies Questions & Answers

Physical volume- no free physical partitions

Discussion started by: markper

3. HP-UX

How Can I Create A Volume Group With Two Hard Disks On Hp-ux C-3750

Discussion started by: bala_mes

4. UNIX for Advanced & Expert Users

LVM - Extending Logical Volume within Volume Group

Discussion started by: ghimanshu