Please forgive me here as I don't fully understand what I am talking about here so if I use the wrong terminology please overlook me.
We have multiple AIX LPARs on the managed system with two VIO Servers. A Co-Worker and I are trying to set up a new LPAR client (The guy that knows this is out) and we are drowning. I use VSCSI on on POWER6 system so I know the general idea but this appears to be a bit different. We looked at other profiles and set up things that look right as for the virtual FC adapter in the VIO Server profile. We gave the adapter id 64 and we assigned an LPAR to it SAPTEST(5). Then modified the AIX LPAR profile to include a new FC Adapter and pointed it at the VIOS id side of 64. I think we gave the client side id 5. The LPAR id is 5 as well as the port id. We need to do this on both VIO Servers I know but just working with one right now.
However the output from the lsmap command does not show all the info I see on the other vfchosts already defined. The VFC client name, VFC client DRC, and ClntName slots are empty. From other articles I have read this will only populate after the client LPAR is up and has the proper multipathing software installed on it. Then the client and VIOS will sync up. That doesn't work for me when to get the client LPAR up I am depending on a SAN disk to install the O/S on.
What am I missing? I have run the vfcmap command to assign the vadapter to the VIO servers physical adapter.
I have provided the output from the lsmap output below.
Hello guys,
It would be so nice of you if someone can provide me with these informations.
1) My SAN group assigned 51G of LUN space to the VIO server.I ran cfgdev to discover the newly added LUN. Unfortunately most of the disks that are in VIO server is 51G. How would I know which is the newly... (3 Replies)
Hello,
I have created mapping of 2 virtual adapters for Lpars using following command:
mkvdev -vdev ipanalyzerlv1 -vadapter vhost11
mkvdev -vdev ipanalyzerlv -vadapter vhost13
The above two commands were succesfull
but when I want to map the third virtual device to the same Lpar than... (3 Replies)
Is anyone here using NPIV with AIX? If you are, what type of switch are you connected to? Also, please share some impressions of NPIV over traditional port-to-port LUN assignments. We are looking to move to NPIV and need some convincing argume... I mean information. (2 Replies)
Hi All,
I'm preparing to migrate some servers from vscsi to pass-thru NPIV. I am planning to have the SAN team move the exact LUNs from vio1/vio2 to those two VWWN through NPIV.
My question is on the partition itself.. right now, let's say I have hdisk0/1/2/3/4 that are part of datavg. They... (2 Replies)
Hi,
I want to change from vscsi to npiv. Is it possible to use both on the same adapter, so we can change the systems one by one, or must we place a second FC adapter in the VIO servers?
Thanks,
Ronald (2 Replies)
Hi, I would like to ask you if you could help me to answer these questions. Please.
How to check in vios, size all pv's and to what they are mapped to?
How to chech on vios/hmc which PowerVM edition is used?
Thank you. (7 Replies)
Hello all I hope someone can help me with this. I have a single LPAR which is supplied a rootvg and datavg disk set from a dual VIO server configuration. I see dual path disks for all the datavg disks but only see one path for the rootvg disks.
The client LPAR has the following:
fcs0 ... (3 Replies)
Hello,
I do not know if this is the right title to use. I have a large dictionary database which has the following structure:
where a b c d e are in English and p q r s t are in a target language., the two separated by the delimiter =.
What I am looking for is a perl script which will take... (5 Replies)
Hi All :)
i would like to know if i can customize the WWN of the new VFC (NPIV).
Or, if i must move the LPAR on another server with another FCS, i have to change the zoning??
Thanks in advance.
Mario
---------- Post updated 09-21-12 at 02:51 AM ---------- Previous update was 09-20-12 at... (1 Reply)
Hello,
Lets say for simplicity that I do not use any vlan config inside my server - one lpar group use hea physical port1, another group hea physical port2. Physical port1 configured as vlan1 on external switch, physical port2 as vlan2.
What is the common practice - should I isolate my vios... (0 Replies)
Discussion started by: vilius
0 Replies
LEARN ABOUT DEBIAN
arithmetic
ARITHMETIC(6) BSD Games Manual ARITHMETIC(6)NAME
arithmetic -- quiz on simple arithmetic
SYNOPSIS
arithmetic [-o +-x/] [-r range]
DESCRIPTION
arithmetic asks you to solve problems in simple arithmetic. Each question must be answered correctly before going on to the next. After
every 20 problems, it prints the score so far and the time taken. You can quit at any time by typing the interrupt or end-of-file character.
The options are as follows:
-o By default, arithmetic asks questions on addition of numbers from 0 to 10, and corresponding subtraction. By supplying one or more
of the characters +-x/, you can ask for problems in addition, subtraction, multiplication, and division, respectively. If you give
one of these characters more than once, that kind of problem will be asked correspondingly more often.
-r If a range is supplied, arithmetic selects the numbers in its problems in the following way. For addition and multiplication, the
numbers to be added or multiplied are between 0 and range, inclusive. For subtraction and division, both the required result and the
number to divide by or subtract will be between 0 and range. (Of course, arithmetic will not ask you to divide by 0.) The default
range is 10.
When you get a problem wrong, arithmetic will remember the numbers involved, and will tend to select those numbers more often than others, in
problems of the same sort. Eventually it will forgive and forget.
arithmetic cannot be persuaded to tell you the right answer. You must work it out for yourself.
DIAGNOSTICS
``What?'' if you get a question wrong. ``Right!'' if you get it right. ``Please type a number.'' if arithmetic doesn't understand what you
typed.
SEE ALSO bc(1), dc(1)BSD May 31, 1993 BSD