Problem finding what is using a serial port Post: 302728367

10 More Discussions You Might Find Interesting

1. Programming

Problem regarding serial port and multithreading

hello, I am creating a application in which I first open the serial port and then create the thread..for reading the data comming through that serial port. from that same thread I create another thread that is write thread means for writing on the serial port... I am continously polling again...

2. Programming

problem while having a communication with serial port?????

hello, I am gettin problem while sending and recieving data through seial port... when I am sending Data then the reciever end is not able to recieve that data ..... Reciever end is running in infinite loop just polling after some time to check that there is data on the port and then again...

3. UNIX for Dummies Questions & Answers

problem with serial port BSD

Hello all , i have change my system debian linux to freebsd( pcBSD) all working as well , but the serial does not work correctly. Under linux the problem does not appears. my problem is than my serial port does work . the first step than i have make is look with dmesg if my serial are...

4. Solaris

Serial port problem

I am working with solaris 9 sparc and I want to connect physical device in serial port but when I am connecting it,It is showing the error window saying-- So can any1 tell me the reason or is there any package I have to add to work with serial port???

5. Programming

problem in coding for GSM interfacing using serial port

i am having some coding problem in c for interfacing the GSM module through serial port. i want to send/receive sms. i have done all the setting for the port and know the AT command to use in this but i am actually having problem in reading and writing from serial port how to handle the signal when...

6. UNIX for Dummies Questions & Answers

Missing serial port

A neighbour's Ubuntu 10.04 machine has five serial ports, one on the motherboard and four on a PCI card. However, only four cards are showing: # dmesg | grep tty console enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ...

7. Shell Programming and Scripting

Need help with serial port

Hi, I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and...

8. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

9. Programming

Read from serial port

Hi I try to communicate with a GSM modem, from C, for sending SMS. I use standart AT-commands. Working well with terminal. There is no problem writing ti the port. But when I try to read I only get a echo, I write "ATI" and get "ATI" back, I should get somthing like "SIEMENS 35...

10. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

LEARN ABOUT OSF1

temporary

Temporary(4)						     Kernel Interfaces Manual						      Temporary(4)

NAME

       Temporary - Stores data files during transfers to remote systems

SYNOPSIS

       /usr/spool/uucp/SystemName/TM.xxPID.000

DESCRIPTION

       The  uucp  Temporary  (TM.*) files store data files during transfers to remote systems.	After a Data (D.*) file is transferred to a remote
       system by the uucico daemon, the uucp program places it in a subdirectory of the uucp spooling directory named  /usr/spool/uucp/SystemName,
       where  the SystemName directory is named for the computer that is transmitting the file.  The uucp program creates a temporary data file to
       hold the original data file.

       The full pathname of the temporary data file is in the following format: /usr/spool/uucp/SystemName/TM.xxPID.000

       where the SystemName directory is named for the computer that is sending the file, and TM.xxPID.000 is the name of the file;  for  example,
       TM.00451.000.  The PID variable is the process ID of the job.

FILES

       Describes accessible remote systems Contains uucp command, data, and execute files Contain data to be transferred.  Contain files that uucp
       has transferred

RELATED INFORMATION

       Daemons: uucico(8)

       Commands: uucp(1), uudemon.cleanu(4), uupick(1), uuto(1), uux(1) delim off

																      Temporary(4)