Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

uux(1) [osf1 man page]

uux(1)							      General Commands Manual							    uux(1)

uux - Runs a command on another system SYNOPSIS
uux [-c | -C] [-n | -z] [- | -p] [-a user] [-bjr] [-g grade] [-s file] [-x debug_level] command_string The uux command runs a specified command command_string on a specified system while enabling you to continue working on the local system. This command runs on systems that support the UUCP protocol. STANDARDS
Interfaces documented on this reference page conform to industry standards as follows: uux(): XCU5.0 Refer to the standards(5) reference page for more information about industry standards and associated tags. OPTIONS
Makes the standard input to uux the standard input to the command_string. Same as -p. Replaces the user ID of the person issuing the com- mand with user ID user. Returns standard input to the command if the exit status is not zero. Transfers the source files to the destina- tion on the specified system. The source files are not copied into the spool directory for transfer. (See the description of the -C option.) Transfers the source files to the spool directory. After a set period of time, (specified in the uusched program) the uucico daemon attempts to transfer the files to the destination on the specified computer. This option is on by default. Occasionally, there are problems in transferring a source file; for example, the remote computer might not be working, or the login attempt might fail. In such cases, the file remains in the spool directory until it is either transferred successfully or removed by the uucleanup command. Specifies when the files are to be transmitted during a particular connection. The variable grade is a single number (0-9) or ASCII letter (A-Z, a-z); lower ASCII-sequence characters cause the files to be transmitted earlier than do higher sequence characters. The number 0 is the highest (earliest) grade; z is the lowest (latest). The default is N. Displays the job identification number of the process that is running the command on the specified system. Use this job number with the uus- tat command to check the status of the command, or with uustat -k to terminate the process. Prevents user notification by mailx of whether the command executed successfully. The default is to notify you if the command fails. Uses the standard input to uux as the standard input to command_string. A - (dash) has the same effect. Prevents the starting of the spooling program that transfers files between systems. The default is to start the spooling program. Reports the status of the transfer in a file specified by file on the designated system. Displays debugging information on the screen of the user's terminal. The debug_level is a number between 0 and 9. The higher number gives a more detailed report. Notifies you if the command executed successfully on the speci- fied system. In that case, you are notified about the failure through the mail system. DESCRIPTION
The command gathers various files from the designated systems, if necessary. It then runs a specified command on a designated system. The user can direct the output from the command to a specified file on a specified system. (For security reasons, many installations permit uux to run only the rmail command.) The uux command creates execute (X.*) files that run commands on the local system. In addition, uux also creates both command (C.*) files and data (D.*) files. Execute files contain the command string to be executed on the designated system. Command files contain the same information as those cre- ated by the uucp command. Data files either contain the data for a remote command execution, or else become X.* files on remote systems for remote command executions. The full pathname of an execute file is a form of the following: /usr/spool/uucp/system/X.systemNxxxx After creating the files in the spooling directory, uux calls the uucico daemon, to transfer the files from the spooling directory on the local system to the designated remote system. Once the files are transferred, the uuxqt daemon executes the command_string on the speci- fied system, placing any output from the command in a designated file on a specified system. The command_string variable is made up of one or more arguments that look like a command line, except that command_string might be prefixed by system!. The default system is the local system. Unless the -n option is specified, uux notifies you if the remote system does not run the command. This response comes by mailx from the remote system. Filenames, Pathnames, and System Names When specifying the destination of the output of a command, you can enter uux in either of the following formats: uux [option ...] com- mand_string > destination uux [option ...] command_string {destination} Destination names can be either of the following: A full pathname. A full pathname preceded by ~user, where user is a login name on the specified system. The uux command replaces this pathname with your login directory. The shell pattern-matching characters ?, *, and [...] can be used in the pathname of a source file (such as files compared by the diff command); the appropriate system expands them. Shell pattern-matching characters should not be used in the destination pathname. Place either two (backslashes) or a pair of " " (double quotes) around pattern-matching characters in a pathname so the local shell can- not interpret them before uux sends the command to a designated system. If using the special shell characters >, <, ;, or | in a pathname, precede each special character with or place "..." around the entire command string. Do not use the shell redirection characters << or >> in a pathname. The uux command attempts to move all files specified on the command line to the designated system. Enclose the names of all output files in parentheses so that uux does not try to transfer them. When specifying a system, always place it before the command_string in the entry. System names must contain only ASCII characters. The ! (exclamation point) preceding the name of the local system in a command is optional. If you choose to include the ! to run a com- mand on the local system using files from two different remote systems, use ! instead of system! to represent the local system, and add system! as the first entry in any pathname on the remote systems. The exclamation point representing a remote system has a different meaning in C shells (csh). When running uux in a C shell, place a (backslash) before the exclamation point in a system name. If the command being executed requests two files stored on the same system, or two files with the same name that are stored on separate systems, the command will be executed, but will not produce the desired results. The following two commands will be executed: uux "nhk!/usr/bin/diff /usr/amy/out1 nhk!/u/amy/out > ~uucp/DF" uux "nhk!/usr/bin/diff nhk!/usr/amy/out1 &!/u/amy/out > ~uucp/DF" (The notation ~uucp is the shorthand way of specifying the public spooling directory /usr/spool/uucppublic.) In the first command, diff is on system nhk, the first source file is on the local system, the second source file (with a different name) is on system nhk, and the out- put is directed to the file DF in the public directory on the local system. In the second command, diff is again on nhk, the first file is also on nhk, the second file (with a different name) is on &, and the output is again directed to DF in the ~uucp directory. The following command will not be executed properly: uux "nhk!/usr/bin/diff &!/u/amy/out merl!/u/amy/out > ~uucp/DF" This command will not be executed because, although the files are on two different systems, they still have the same filename. EXAMPLES
To run the lp command on a remote system, enter: uux merl!lp /reports/memos/lance In this example, the file /reports/memos/lance is printed on the remote system merl. Unless the -n option or the -z option is spec- ified, the uux command notifies you if the remote system fails to run the command. The response comes by the mailx command from the remote system. To run commands on two remote systems, enter the information on separate command lines, enter: uux merl!print /reports/memos/lance uux zeus!print /test/examples/examp1 In this example, the file /reports/memos/lance is printed on the remote system merl, and the file /test/examples/examp1 is printed on the remote system zeus. To get the job_number of a job and then compare a file on the local system zeus with a file on a remote system when the diff command is stored on the local system, use either of the following formats: uux -j "/usr/bin/diff /usr/amy/f1 nhk!/u/amy/f2 > ~uucp/f1.diff" or uux -j /usr/bin/diff /usr/amy/f1 nhk!/u/amy/f2 {~uucp/f1/diff} This command gets the file /usr/amy/f1 from the remote system nhk, compares it to the file /u/amy/f2 on the local system zeus, and places the output of the command in the local public directory in a file named f1.diff. (The full pathname of this file is /usr/spool/uucppublic/f1.diff.) Using the -j option produces the output zeusN52d9. As shown in the example, the destination name must be entered in one of two ways: Preceded by a > (redirection symbol) with the whole command string enclosed in "..." (double quotes) Enclosed in braces and backslashes, as {...} To compare files that are located on two different remote systems, nhk and &, using the diff command on the local system, enter: uux "!/usr/bin/diff nhk!/usr/amy/f1 &!/u/amy/f2 > !f1.diff" This command gets the file /usr/amy/f1 from the system nhk and the file /u/amy/f2 from &, runs a diff command on the two files, and places the results in the file f1.diff, located in the current working directory on the local system. Additional points: This output file must be write enabled. If you are uncertain about the permission status of a specific target output file, direct the results to the public directory. The exclamation points representing the local system are optional. Both of the examples above use a > (redirection symbol) preceding the name of the output file. When using the special shell characters >, <, ;, or |, either quote the entire command_string, or quote the special characters as individual arguments. To specify an out- put file on a different remote system, enter: uux nhk!uucp &!/u/amy/f1 {merl!/u/geo/test} This command runs uucp on the remote system nhk. The uucp command then sends the file /u/amy/f1, stored on system &, to user geo on system merl as test. To get selected fields from a file on remote system nhk and place them in a file on the local system, enter: uux "cut -f1 -d: nhk!/etc/passwd > ~uucp/passw.cut" This command runs cut on the local system, gets the first field from each line of the password file on system nhk, and places the output in the file passw.cut in the public directory on the local system. In this example, uux is running in a C shell, so a (backslash) must precede the ! (exclamation point) in the name of the remote system. ENVIRONMENT VARIABLES
The following environment variables affect the execution of uux: [Tru64 UNIX] Specifies the flow control used on the connection. Permit- ted values are: HW (hardware), SW (software), HSW (hardware and software), and NONE. The uugetty on the remote system must also use the same flow control. Provides a default value for the internationalization variables that are unset or null. If LANG is unset or null, the corresponding value from the default locale is used. If any of the internationalization variables contains an invalid setting, the utility behaves as if none of the variables had been defined. If set to a non-empty string value, overrides the values of all the other interna- tionalization variables. Determines the locale for the interpretation of sequences of bytes of text data as characters (for example, sin- gle-byte as opposed to multibyte characters in arguments and input files). Determines the locale that should be used to affect the format and contents of diagnostic messages written to standard error. Determines the location of message catalogues for the processing of LC_MES- SAGES. [Tru64 UNIX] Specifies the amount of time (in seconds) for uucico to try to establish a connection before it times out. A value of 0 (zero) indicates an unlimited amount of time. FILES
Spooling directory. Contains the uucico daemon. Public directory. SEE ALSO
Commands: ct(1), cu(1), mailx(1), rmail(1), sendmail(8), tip(1), uucico(8), uucleanup(8), uucp(1), uuencode(1), uulog(1), uuname(1), uupick(1), uusched(8), uusend(1), uustat(1), uuto(1) Standards: standards(5) uux(1)
Man Page