(1) It can ping itself by IP on both interfaces.
(2) Other hosts in the same subnet can ping bond0, but not eth1.
Thanks.
Quote:
Originally Posted by DGPickett
Can it ping itself by IP on both interfaces?
Can other hosts on either net ping it on both IP?
---------- Post updated at 09:07 AM ---------- Previous update was at 09:04 AM ----------
Here is the info:
Thanks.
Quote:
Originally Posted by Tommyk
the interface needs to be configured. Is the bond up and running?
As you haven't shown any other interface configurations you should have this entry in one of them (i.e. /etc/sysconfig/network-scripts/ifcfg-eth0)
Last edited by Scott; 10-26-2012 at 10:21 AM..
Reason: Code tags
Hello,
I've moved to a new network with multiple AIX box's. Most of them are working fine and dandy.
On one box I need to set up a static route to a gateway.. no problem right?
Whenever I add the route it appears in the routing table as UGc and then begins adding new entries to the... (1 Reply)
I have a string as "Period= 20090531 Client Name= Clayton Lumbar Company Destination= MD"
I want to parse the string and store it in 3 different variables.
$period (should get value 20090531)
$client (should get value "Clayton Lumbar company")
$dest (should get value MD)
How can I do... (3 Replies)
I have an IP routing issue or I am just to stupid to work it out myself.
I have setup am old PC running SUSE Linux 11.3 as a router, the system has 3 Interfaces connecting 3 networks.
Interface 1 = 10.164.2.161/21
Interface 2 = 192.168.1.210/24
Interface 3 = 30.1.0.11/16
The default... (6 Replies)
I have run into a wall troubleshooting a Centos 5 networking issue. Hoping someone can assist.
I've got a box with two vlans trunked over bond0
bond0 Link encap:Ethernet HWaddr 00:22:64:C1:D6:60
inet6 addr: fe80::222:64ff:fec1:d660/64 Scope:Link ... (0 Replies)
hello everyone!:)
I have an exercise which I think is difficult for beginner like me. Here is the exercise
Create a shell script, which takes a directory as command line argument.
Script displays ten first lines from every text file in that directory. After
displaying the lines from the... (1 Reply)
hi guys
suse 11 SP1 x64
I have a server (4 NIC ports 192.168.100.100-103) that connects point to point to a storage device (same thing 4 ports 192.168.110.100-113) but this server connects to normal LAN 10.6.100.x - gateway 10.6.100.1
the issue is when testing connectivity to the storage... (7 Replies)
we are not able to ping client server (falcon-ebr.sbms.bsc.com) from netbackup master server (135.179.96.122 tsprd-ebr.edc.single.net)
However from client server we are able to ping the master Server.
Please assist on this (1 Reply)
Hi,
Please help me on issue described below,
I have 4 machine setup, M1 -> M2 -> M3 | M4. And A laptop that can be reachable through both M3 and M4.
M2 has 2 NIC conected to M3 and M4. Now I want to divide the flow coming from M1 for laptop.
At M2, I have done following,... (1 Reply)
Discussion started by: rahulbhansali24
1 Replies
LEARN ABOUT DEBIAN
ifdata
ifdata(1)ifdata(1)NAME
ifdata - get network interface info without parsing ifconfig output
SYNOPSIS
ifdata [options] {iface}
DESCRIPTION
ifdata can be used to check for the existence of a network interface, or to get information abut the interface, such as its IP address. Un-
like ifconfig or ip, ifdata has simple to parse output that is designed to be easily used by a shell script.
OPTIONS -h Print out a help summary.
-e Test to see if the interface exists, exit nonzero if it does not.
-p Prints out the whole configuration of the interface.
-pe Prints "yes" or "no" if the interface exists or not.
-pa Prints the IPv4 address of the interface.
-pn Prints the netmask of the interface.
-pN Prints the network address of the interface.
-pb Prints the broadcast address of the interface.
-pm Prints the MTU of the interface.
Following options are Linux only.
-ph Prints the hardware address of the interface.
-pf Prints the flags of the interface.
-si Prints out all the input statistics of the interface.
-sip Prints the number of input packets.
-sib Prints the number of input bytes.
-sie Prints the number of input errors.
-sid Prints the number of dropped input packets.
-sif Prints the number of input fifo overruns.
-sic Print the number of compressed input packets.
-sim Prints the number of input multicast packets.
-so Prints out all the output statistics of the interface.
-sop Prints the number of output packets.
-sob Prints the number of output bytes.
-soe Prints the number of output errors.
-sod Prints the number of dropped output packets.
-sof Prints the number of output fifo overruns.
-sox Print the number of output collisions.
-soc Prints the number of output carrier losses.
-som Prints the number of output multicast packets.
-bips Prints the number of bytes of incoming traffic measured in one second.
-bops Prints the number of bytes of outgoing traffic measured in one second.
AUTHOR
Benjamin BAYART
2006-03-07 ifdata(1)