Hi,
Can we modify the GDB source code so as to analyze core dumps from different targets? From my analysis, I think we need to build our section table statically for each target. i.e., including the various address boundaries in build_section_table() function. If this is the case, then the GDB... (2 Replies)
hi you all!
I can write a network program to send and receive some messages. I use
read() and write() functions for extracting of sending messages via a given socket. By doing so, i know only the actions performed at the application layer of the TCP/IP suite. But i want to control the actual... (2 Replies)
Hi,
Recently I faced with need of analyze root disk. I figured out two possible ways to do it:
1. Practical. Boot from CD and run format
2. Theoretical. Create live upgrade boot environment on another disk, activate it, reboot, unmont all root disk partitions and run format.
I've already... (3 Replies)
Hello there,
i am trying to write a shell script to analyse some of my log files.
I want the script to check if there is a logfile from yesterday or today (some times the script that creates the logfile takes a bit longer and its after 00:00) and search the logfile itself if the script was... (0 Replies)
Dear All,
I am new to this forum. This is my first.
I am facing customer issue. Customer has got core file while running the server.
He had sent core file and details from pstack, pmap and pldd commands.
I have to debug this application, please help me to fix this issue.
I am using sparc... (1 Reply)
Dear All,
I am new to this forum. This is my first.
I am facing customer issue. Customer has got core file while running the server.
He had sent core file and details from pstack, pmap and pldd commands.
I have to debug this application, please help me to fix this issue.
I am using sparc 10... (4 Replies)
Hi all,
I'm working with a peice of software that runs on Linux that allows planning trips in cars through maps. This software has different variations depending on the type of car, e.g. BMW, Audi, Hyundai, etc... Each variation has a dependency on common external components that are not... (1 Reply)
Hello,
MBR partition table made by linux fdisk looks certainly not correct when printed by openbsd fdisk:
Partition table created on linux (centos 6.3):
# fdisk -l /dev/sdc
Disk /dev/sdc: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders
Units = cylinders of 16065 *... (2 Replies)
Hi All,
When can we see these messages in the syslog.
We have service guard cluster software installed on hpux 11iv3 servers.
We were able to see the below error so many times in our syslog messages
cmdisklockd: Unable to convert device to I/O tree node: I/O tree node does not exist.
... (2 Replies)
Discussion started by: Sachin1987
2 Replies
LEARN ABOUT HPUX
prtvtoc
prtvtoc(1M) System Administration Commands prtvtoc(1M)NAME
prtvtoc - report information about a disk geometry and partitioning
SYNOPSIS
prtvtoc [-fhs] [-t vfstab] [-m mnttab] device
DESCRIPTION
The prtvtoc command allows the contents of the label to be viewed. The command can be used only by the super-user.
The device name can be the file name of a raw device in the form of /dev/rdsk/c?t?d?s2 or can be the file name of a block device in the
form of /dev/dsk/c?t?d?s2.
OPTIONS
The following options are supported:
-f Report on the disk free space, including the starting block address of the free space, number of blocks, and unused parti-
tions.
-h Omit the headers from the normal output.
-m mnttab Use mnttab as the list of mounted filesystems, in place of /etc/mnttab.
-s Omit all headers but the column header from the normal output.
-t vfstab Use vfstab as the list of filesystem defaults, in place of /etc/vfstab.
EXAMPLES
Example 1: Using the prtvtoc Command
The following example uses the prtvtoc command on a 424-megabyte hard disk:
example# prtvtoc /dev/rdsk/c0t3d0s2
* /dev/rdsk/c0t3d0s2 partition map
*
* Dimension:
* 512 bytes/sector
* 80 sectors/track
* 9 tracks/cylinder
* 720 sectors/cylinder
* 2500 cylinders
* 1151 accessible cylinders
*
* Flags:
* 1: unmountable
* 10: read-only
* * First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 0 76320 76319 /
1 3 01 76320 132480 208799
2 5 00 0 828720 828719
5 6 00 208800 131760 340559 /opt
6 4 00 340560 447120 787679 /usr
7 8 00 787680 41040 828719 /export/home
example#
The data in the Tag column above indicates the type of partition, as follows:
Name Number
UNASSIGNED 0x00
BOOT 0x01
ROOT 0x02
SWAP 0x03
USR 0x04
BACKUP 0x05
STAND 0x06
VAR 0x07
HOME 0x08
ALTSCTR 0x09
CACHE 0x0a
RESERVED 0x0b
The data in the Flags column above indicates how the partition is to be mounted, as follows:
Name Number
MOUNTABLE, READ AND WRITE 0x00
NOT MOUNTABLE 0x01
MOUNTABLE, READ ONLY 0x10
Example 2: Using the prtvtoc Command with the -f Option
The following example uses the prtvtoc command with the -f option on a 424-megabyte hard disk:
example# prtvtoc -f /dev/rdsk/c0t3d0s2
FREE_START=0 FREE_SIZE=0 FREE_COUNT=0 FREE_PART=34
Example 3: Using the prtvtoc Command on a Disk Over One Terabyte
The following example uses uses the prtvtoc command on a disk over one terabyte:.
example# prtvtoc /dev/rdsk/c1t1d0s2
* /dev/rdsk/c1t1d0s2 partition map
*
* Dimensions:
* 512 bytes/sector
* 3187630080 sectors
* 3187630013 accessible sectors
*
* Flags:
* 1: unmountable
* 10: read-only
*
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 34 262144 262177
1 3 01 262178 262144 524321
6 4 00 524322 3187089340 3187613661
8 11 00 3187613662 16384 318763004
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO devinfo(1M), fmthard(1M), format(1M), mount(1M), attributes(5)WARNINGS
The mount command does not check the "not mountable" bit.
SunOS 5.10 25 Jul 2002 prtvtoc(1M)