i am using the below code to swap the fields in file
output.txt
The above command is working fine. I am trying make it dynamic for swpping the field.I am struck where and how to start .My inputs should be the which column should come in first field and rest moving other side .Please find example for the above file
Hello and thanks in advance.
I have a Sun box with raid 1 on the O/S disks using solaris svm.
I want to unmirror my swap partition, and add the slice on the second disk as an additional swap device. This would give me twice as much swap space.
I have been warned not to do this by some... (3 Replies)
I have a file (tmp.out) with contents delimited by '|':
1|d|2|rt|
3|sfd|4|sgf|
5|sg|6|gtr|
7|s|8|sf|
I want to write only the 1st and 3rd columns to another file, but they should be swapped with each other:
2|1
4|3
6|5
8|7
Here is what I have so far:
... (2 Replies)
I'm working on formatting some attendance data to meet a vendors requirements to upload to their system. With some help on the forums here, I have the data close. But they've since changed what they want.
The vendor wants me to submit three fields to them. Field 1 is the studentid field,... (4 Replies)
free -m : 1023 total swap space
created default partition /dev/sdb1 50M using fdisk. i did write the changes.
#mkswap /dev/sdb1
#swapon /dev/sdb1
free -m : 1078 total swap space
this shows that the swap is on
Question : i did not change the type LINUX SWAP (82) in fdisk.
so why is... (5 Replies)
Hi
I have an integrity machine rx7620 and rx8640 running hp-ux 11.31. I'm planning to fine tune the system:
- I would like to know when does the memory swap space spill over to the device swap space?
- And how much % of memory swap utilization should be specified (swap space device... (6 Replies)
If I am posting this to the wrong section please move it somewhere it fits. I apologize if this is not the correct section.
I have a site where I want to have form that in a "Visitor name" section to be able to add fieldets as needed. I think I have that worked out.
So the below code is the... (4 Replies)
Hi experts,
I need to print the first field first then last two fields should come next and then i need to print rest of the fields.
Input :
a1,abc,jsd,fhf,fkk,b1,b2
a2,acb,dfg,ghj,b3,c4
a3,djf,wdjg,fkg,dff,ggk,d4,d5
Expected output:
a1,b1,b2,abc,jsd,fhf,fkk... (6 Replies)
Hi Solaris Folks :),
I need to calculate the swap usage on solaris server, please let me understand the output of below swap -s and swap -l commands.
$swap -s
total: 1774912k bytes allocated + 240616k reserved = 2015528k used, 14542512k available
$swap -l
swapfile dev swaplo... (6 Replies)
Hi
I have a file as below
<field1> <field2> <field3> ... <field_num1> <field_num2>
Trying to sort based on difference of <field_num1> and <field_num2> in desceding order and print all fields.
I tried this and it doesn't sort on the difference field .. Appreciate your help.
cat... (9 Replies)
Hi,
Below are the sample files. x.txt is from an Excel file that is a list of users from Windows and y.txt is a list of database account.
$ head -500 x.txt y.txt
==> x.txt <==
TEST01 APP_USER_PROFILE
USER03 APP_USER_PROFILE
TEST02 APP_USER_EXP_PROFILE
TEST04 APP_USER_PROFILE
USER01 ... (3 Replies)
Discussion started by: newbie_01
3 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)