Sponsored Content
Operating Systems Linux bringing up interface eth0 rtnetlink Post 302714759 by thmnetwork on Friday 12th of October 2012 02:51:38 PM
Old 10-12-2012
It's saying "file exists" because the interface is already defined at the time the script tries to define it again. I'm pretty sure (not certain) this is because you're mixing old-style ifcfg files with NetworkManager. Since these are two different ways of accomplishing the same end, you're going to have to pick one or the other. It sounds like you're using ifcfg on the other server as well.

Personally, I prefer ifcfg, so I would stop and chkconfig off the NetworkManager service, change NM_CONTROLLED to be no in each ifcfg and reboot the system (sometimes you can get away with just restarting the network service but if it's already off the network you might as well use this as a chance to clear out anything NM has done in the background before people start depending on this server again).
 

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Need FIX for: RTNETLINK answers: Invalid argument

OK...I'm using the latest version of Fedora 10. My network connection was working fine, and I had several network LAN shares on my desktop. Then I rebooted the system without dismounting those shares first. ooops. <:( ...When the system came back up, my network connection was gone. All... (2 Replies)
Discussion started by: Pudnik
2 Replies

2. UNIX for Dummies Questions & Answers

bringing a process to the foreground

If i have a single file i would just press fg but if i have multiple files running in the backgound and want to bring a specific one to the foreground how would i do that? Thanks!! (1 Reply)
Discussion started by: JamieMurry
1 Replies

3. Solaris

Command line Interface or GUI Interface not shown on solaris

Dear all, I am a newbie in solaris and I need your advice. I have a Solaris version 5.9 installed on Sunfire V240. I am able to ssh the machine from putty remotely. My problem is that I cannot see the display from KVM switch I have connected to it. I need also to be able to see the GUI... (2 Replies)
Discussion started by: mbouster
2 Replies

4. SCO

Change SCO - GUI or Desktop interface to DOS based interface

Hi all I have installed a demo version of SCO OpenServer 5.0.2, I finally found it is Desktop Interface, I would like to know how to change its interface to dos based interface? If you have any ideas, please tell me then. Thank you (2 Replies)
Discussion started by: TinhNhi
2 Replies

5. IP Networking

Socket and interface (eth0, eth 1)relationship

hi, Could some one answer this please we have a program with client socket declared which connect to a server for the above program description we wont send an interface information ... let us suppose, I have two interfaces (eth0 , eth1) which are assigned some ip, which interface the... (1 Reply)
Discussion started by: Gopi Krishna P
1 Replies

6. IP Networking

Splitting eth0 traffic into two virtual interface

Hello everybody, I have been reading many posts about this topic but I have no figure out how to solve it. I need to split the traffic incoming on eth0 on two other interfaces (for instance one receiving on port 80 and the others on the other interface). I cannot understand how to do that.... (2 Replies)
Discussion started by: nicandro
2 Replies

7. SuSE

Routing RTNETLINK answers: No such process

Hello, I have a opensuse Linux server with two nics. eth0 = internal network with 172.16.1.24 eth1 = external network with ip 172.19.3.2 Internal networks: 172.16.0.0/16, 172.17.0.0/16 and 192.168.0.0/16. External network: 172.19.3.0/16 The default gateway is 172.19.3.1 on eth1. ... (3 Replies)
Discussion started by: felix123
3 Replies

8. IP Networking

Stuck at "bringing up interface eth0:"

Server is stuck at "Stuck at "bringing up interface eth0:"" after i hard reset the server I have IPMI access, please help me diagnose the cause if you can :( (0 Replies)
Discussion started by: postcd
0 Replies

9. IP Networking

What's the rtnetlink behavior if adding or removing ethernet?

Hello All, While I am studying on RTNETLINK, I understand that the kernel will send RTM_ADDLINK or RTM_DELLINK if interface is added/removed at kernel space. However, I have a question regarding to the RTNETLINK message if adding or removing ethernet to/from bridge? Since adding or removing... (0 Replies)
Discussion started by: urnoicxk
0 Replies
Match-all classifier in tc(8)                                          Linux                                         Match-all classifier in tc(8)

NAME
matchall - traffic control filter that matches every packet SYNOPSIS
tc filter ... matchall [ skip_sw | skip_hw ] [ action ACTION_SPEC ] [ classid CLASSID ] DESCRIPTION
The matchall filter allows to classify every packet that flows on the port and run a action on it. OPTIONS
action ACTION_SPEC Apply an action from the generic actions framework on matching packets. classid CLASSID Push matching packets into the class identified by CLASSID. skip_sw Do not process filter by software. If hardware has no offload support for this filter, or TC offload is not enabled for the inter- face, operation will fail. skip_hw Do not process filter by hardware. EXAMPLES
To create ingress mirroring from port eth1 to port eth2: tc qdisc add dev eth1 handle ffff: ingress tc filter add dev eth1 parent ffff: matchall skip_sw action mirred egress mirror dev eth2 The first command creats an ingress qdisc with handle ffff: on device eth1 where the second command attaches a matchall filters on it that mirrors the packets to device eth2. To create egress mirroring from port eth1 to port eth2: tc qdisc add dev eth1 handle 1: root prio tc filter add dev eth1 parent 1: matchall skip_sw action mirred egress mirror dev eth2 The first command creats an egress qdisc with handle 1: that replaces the root qdisc on device eth1 where the second command attaches a matchall filters on it that mirrors the packets to device eth2. To sample one of every 100 packets flowing into interface eth0 to psample group 12: tc qdisc add dev eth0 handle ffff: ingress tc filter add dev eth0 parent ffff: matchall action sample rate 100 group 12 SEE ALSO
tc(8), iproute2 21 Oct 2015 Match-all classifier in tc(8)
All times are GMT -4. The time now is 07:18 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy