i would like to enter (user input) a bunch of numbers seperated by space:
10 15 20 25
and use awk to print out any lines in a file that have matching numbers
so output is:
22 44 66 55 (10) 77 (20)
(numbers 10 and 20 matched for example)
is this possible in awk . im using gawk for... (5 Replies)
if the column1 and 2 in both files has same key (for example "a" and "a1") compare each first key value(a1 of a) of input2 (for example 1-4 or 65-69 not 70-100 or 44-40 etc) with all the values in input1.
if the range of first key value in input2 is outof range in input1 values named it as out... (54 Replies)
1. if the 1st row IDs of input1 (ID1/ID2.....) is equal to any IDNames of input2
print all relevant values together as defined in the output.
2. A bit tricky part is IDno in the output. All we need to do is numbering same kind of
letters as 1 (aa of ID1) and different letters as 2 (ab... (4 Replies)
I am looking for a better way to match real numbers within a specified tolerance range. My current code is as follows:
if ($1 !~ /^CASE/) for(i=1;i in G;i++) if (G >= $5-1 && G <= $5+1)
{ print $1,$4,$5,J,G }
else { print $1,"NO MATCH" }
where $5 and G are... (3 Replies)
for every specific $1,$2 check the values ($2,$3) of their E ot I of input1 and overlap with input2.
Specify names based on output.
#######
if middle value is missing name them "SE"
if first value is missing name them "AFE"
if last value is missing name them "ALE"
if 2 middle values are... (1 Reply)
picked this up from another thread.
echo 1st_file.csv; nawk -F, 'NR==FNR{a++;next} a{b++}
END{for(i in b){if(b-1&&a!=b){print i";\t\t"b}else{print "NEW:"i";\t\t"b} } }' OFS=, 1st_file.csv *.csv | sort -r
i need to use the above but with a slight modification..
1.compare against 3 month... (25 Replies)
Hello to all in forum,
Maybe an awk expert could help me with this complex task for me.
I have the input shown below and I would like to get the output as follow:
- I would like the output separated by commas.
- The header is fixed and will be the same always.
- For the lines containing... (22 Replies)
Hi Experts,
I am finding difficulty to get exact match:
file
OPERATING_SYSTEM=HP-UX
LOOPBACK_ADDRESS=127.0.0.1
INTERFACE_NAME="lan3"
IP_ADDRESS="10.53.52.241"
SUBNET_MASK="255.255.255.192"
BROADCAST_ADDRESS=""
INTERFACE_STATE=""
DHCP_ENABLE=0
INTERFACE_NAME="lan3:1"... (6 Replies)
Basically, I have two files
dupestest.txt
152,153
192,193,194
215,216
290,291
2279,2280 2282,2283haftest.txt
152,ABBOTS ROAD
153,ABBOTS ROAD
154,ABBOTS ROAD
155,ABBOTS ROAD
156,ABBOTS ROAD
157,ABBOTS ROADI want to find the numbers in dupestest.txt in haftest.txt... (4 Replies)
I am trying to look for $2 of file1 (skipping the header) in $2 of file2 (skipping the header) and if they match and the value in $10 is > 30 and $11 is > 49, then print the line from file1 to a output file. If no match is foung the line is not printed. Both the input and output are tab-delimited.... (3 Replies)
Discussion started by: cmccabe
3 Replies
LEARN ABOUT MINIX
join
JOIN(1) General Commands Manual JOIN(1)NAME
join - relational database operator
SYNOPSIS
join [-an] [-e s] [-o list] [-tc] file1 file2
DESCRIPTION
Join forms, on the standard output, a join of the two relations specified by the lines of file1 and file2. If file1 is `-', the standard
input is used.
File1 and file2 must be sorted in increasing ASCII collating sequence on the fields on which they are to be joined, normally the first in
each line.
There is one line in the output for each pair of lines in file1 and file2 that have identical join fields. The output line normally con-
sists of the common field, then the rest of the line from file1, then the rest of the line from file2.
Fields are normally separated by blank, tab or newline. In this case, multiple separators count as one, and leading separators are dis-
carded.
These options are recognized:
-an In addition to the normal output, produce a line for each unpairable line in file n, where n is 1 or 2.
-e s Replace empty output fields by string s.
-o list
Each output line comprises the fields specified in list, each element of which has the form n.m, where n is a file number and m is a
field number.
-tc Use character c as a separator (tab character). Every appearance of c in a line is significant.
SEE ALSO sort(1), comm(1), awk(1).
BUGS
With default field separation, the collating sequence is that of sort -b; with -t, the sequence is that of a plain sort.
The conventions of join, sort, comm, uniq, look and awk(1) are wildly incongruous.
7th Edition April 29, 1985 JOIN(1)