Need Help, I want to reset password for Sun Fire T2000 Server Post: 302712427

Sponsored Content

Operating Systems Solaris Need Help, I want to reset password for Sun Fire T2000 Server Post 302712427 by Sameer Naik on Tuesday 9th of October 2012 07:29:14 AM

10-09-2012

Registered User

Need Help, I want to reset password for Sun Fire T2000 Server

==============================

Code:

ALOM BOOTMON v1.3.1
ALOM Build Release: 001
Reset register: f0000000 EHRS ESRS LLRS SWRS
ALOM POST 1.0
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
  Slide address bits to test open address lines
  Test for shorted address lines
Memory Address Lines Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
ALOM POST 1.0
   Status = 00007fff
Returned from Boot Monitor and Handshake
Instruction CACHE Test
  DISABLE the I-CACHE
  ENABLE the I-CACHE
  Verify I-CACHE Performance Increase
Instruction CACHE Test, PASSED.
Memory Cells Test
  Counting UP:    Write data:  00000000
  Counting DOWN:  Read - Verify - Write data:  ffffffff
  Counting UP:    Read - Verify - Write data:  55aa33cc
Memory Cells Test, PASSED.
Data CACHE Test
  Verify D-CACHE Performance Increase
    D-CACHE Performance Increase I-CACHE Disabled
    D-CACHE Performance Increase I-CACHE Enabled
  Verify D-CACHE Memory
Data CACHE Test, PASSED.
Main Sectors FLASH CRC Test
Main Sectors FLASH CRC Test, PASSED.
Loading the runtime image... VxWorks running.
Starting Advanced Lights Out Manager CMT v1.3.1
Copyright 2006 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Current mode: NORMAL
Attaching network interface lo0... done.
Attaching network interface motfec0.... done.
Booting from Segment 0
Sun(tm) Advanced Lights Out Manager CMT v1.3.1
Full VxDiag Tests
BASIC TOD TEST
  Read the TOD Clock:
SC Alert: Preceding SC reset due to watchdog
SAT JAN 01 00:31:41 2000
  Wait, 1 - 3 seconds
SC Alert: SC System booted.
  Read the TOD Clock:        SAT JAN 01 00:31:43 2000
BASIC TOD TEST, PASSED
ETHERNET CPU LOOPBACK TEST
  50 BYTE PACKET   - a 0 in field of 1's.
  50 BYTE PACKET   - a 1 in field of 0's.
  900 BYTE PACKET  - pseudo-random data.
ETHERNET CPU LOOPBACK TEST, PASSED
Full VxDiag Tests - PASSED
    Status summary  -  Status = 7FFF
       VxDiag    -          -  PASSED
       POST      -          -  PASSED
       LOOPBACK  -          -  PASSED
       I2C       -          -  PASSED
       EPROM     -          -  PASSED
       FRU PROM  -          -  PASSED
       ETHERNET  -          -  PASSED
       MAIN CRC  -          -  PASSED
       BOOT CRC  -          -  PASSED
       TTYD      -          -  PASSED
       TTYC      -          -  PASSED
       MEMORY    -          -  PASSED
       MPC885    -          -  PASSED
Please login:

-----------------------( I am stuck here)-----------------------
Not able to log in

Last edited by DukeNuke2; 10-10-2012 at 06:05 AM..

Sameer Naik

View Public Profile for Sameer Naik

Find all posts by Sameer Naik

9 More Discussions You Might Find Interesting

1. Solaris

How to reset SC admin password in Netra T2000 server?

I have one Sun Netra T2000 Server. The ALOM SC admin password of this server is not known. Could you anyone help and tell me how can i reset the SC admin account password?? Thanks in advance..

2. Solaris

Error while trying to boot from cdrom on Sun Fire T2000

Hi Guyz, I recently downloaded sol-10-u6-ga1-sparc-dvd.iso from Sun. I burned the disk as cd .iso. When trying to boot at the ok> boot cdrom i get the following error: ----------------------------------------------------------------------- Boot device:...

3. Solaris

Sun Server T2000 occasionally reboot

Hi, i am really 'fresh' to Solaris or any UNIX OS. My role as web developer but i need slightly involve to Solaris support. It is harder for me to understand it and i recently encounter a problems. /var file system (/dev/md/rdsk/d425) is being checked. run fsck -F ufs /dev/md/rdsk/d425 ...

4. Solaris

How to create Logical domain in Sun Fire T2000 server

Hi I am fresher in Virtualisation in solaris 10.I need to know how to install and configure guest OS, I have a server Sun T2000 with solaris 10 OS BASE. How to install logical domain, what are the prerequest for installing l domain can some one guide me what are the basic requirement to...

5. Hardware

Hardware RAID on Sun T2000 Server

Hi All I have a Sun T2000 server. Couple of years ago I had configured and mirrored the boot drive with an other drive using hardware RAID 1 using raidctl command. Following is the hardware RAID output. root@oracledatabaseserver / $ raidctl RAID Volume RAID RAID Disk...

6. Solaris

Firmware password Solaris Sun Fire v440

Hi: I bougth an used Sun Fire v440, and It have a firmware password. When I turn on the server, it ask for firmware password. (I don 't know what is the correct password). I can access to SC, but when I want to access to OBP, Firmware Password appears again. I remove the battery for two hours,...

7. Hardware

Sun fire 4270 reset BIOS settings after reboot

Hello, I am trying to perform Suse 10 SP3 installation via network in 6 Sun Fire 4270 M2 servers. The problem is that even if i set first prio boot device the hard disk the system always try to boot from network.And after the first restart the BIOS setting has been lost(and PXE come first...

8. Solaris

Recover/Reset Sun Java System Server Console password

I am administering a Solaris 10 server that I have root password for but need to get to the system server console. The password has been 'forgotten'. I've tried changing it in /var/opt/mps/serverroot/admin-serv/config/admpw and local.conf with the current hashed password in /etc/shadow for a...

9. Solaris

Reset password RSC SUN V490

Dear all Can you help me to reset RSC from Sun V490 Inside this machine the Operating System is broken.. please help guys thanks

LEARN ABOUT DEBIAN

ppmtosixel

ppmtosixel(1)						      General Commands Manual						     ppmtosixel(1)

NAME

       ppmtosixel - convert a portable pixmap into DEC sixel format

SYNOPSIS

       ppmtosixel [-raw] [-margin] [ppmfile]

DESCRIPTION

       Reads  a  portable  pixmap  as input.  Produces sixel commands (SIX) as output.	The output is formatted for color printing, e.g. for a DEC
       LJ250 color inkjet printer.

       If RGB values from the PPM file do not have maxval=100, the RGB values are rescaled.  A printer control header and a color assignment table
       begin the SIX file.  Image data is written in a compressed format by default.  A printer control footer ends the image file.

OPTIONS

       -raw   If  specified,  each  pixel  will  be explicitly described in the image file.  If -raw is not specified, output will default to com-
	      pressed format in which identical adjacent pixels are replaced by "repeat pixel" commands.  A raw file is often an order	of  magni-
	      tude larger than a compressed file and prints much slower.

       -margin
	      If  -margin  is not specified, the image will be start at the left margin (of the window, paper, or whatever).  If -margin is speci-
	      fied, a 1.5 inch left margin will offset the image.

PRINTING

       Generally, sixel files must reach the printer unfiltered.  Use the lpr -x option or cat filename > /dev/tty0?.

BUGS

       Upon rescaling, truncation of the least significant bits of RGB values may result in poor color conversion.  If the original PPM maxval was
       greater	than  100,  rescaling  also reduces the image depth.  While the actual RGB values from the ppm file are more or less retained, the
       color palette of the LJ250 may not match the colors on your screen.  This seems to be a printer limitation.

SEE ALSO

       ppm(5)

AUTHOR

       Copyright (C) 1991 by Rick Vinci.

								   26 April 1991						     ppmtosixel(1)