metadb(1M)						  System Administration Commands						metadb(1M)

NAME

       metadb - create and delete replicas of the metadevice state database

SYNOPSIS

       /sbin/metadb -h

       /sbin/metadb [-s setname]

       /sbin/metadb [-s setname] -a [-f] [-k system-file] mddbnn

       /sbin/metadb [-s setname] -a [-f] [-k system-file] [-c number] [-l length] slice...

       /sbin/metadb [-s setname] -d [-f] [-k system-file] mddbnn

       /sbin/metadb [-s setname] -d [-f] [-k system-file] slice...

       /sbin/metadb [-s setname] -i

       /sbin/metadb [-s setname] -p [-k system-file] [mddb.cf-file]

DESCRIPTION

       The  metadb  command  creates  and  deletes  replicas of the metadevice state database. State database replicas can be created on dedicated
       slices, or on slices that will later become part of a simple metadevice (concatenation or stripe) or RAID5 metadevice. Do not  place  state
       database  replicas on fabric-attached storage, SANs, or other storage that is not directly attached to the system and available at the same
       point in the boot process as traditional SCSI or IDE drives. See NOTES.

       The metadevice state database contains the configuration of all metadevices and hot spare pools in the system. Additionally, the metadevice
       state  database keeps track of the current state of metadevices and hot spare pools, and their components. Solaris Volume Manager automati-
       cally updates the metadevice state database when a configuration or state change occurs. A submirror failure  is  an  example  of  a  state
       change. Creating a new metadevice is an example of a configuration change.

       The  metadevice	state  database  is actually a collection of multiple, replicated database copies. Each copy, referred to as a replica, is
       subject to strict consistency checking to ensure correctness.

       Replicated databases have an inherent problem in determining which database has valid and correct data. To solve this problem, Volume  Man-
       ager  uses a majority consensus algorithm. This algorithm requires that a majority of the database replicas be available before any of them
       are declared valid. This algorithm strongly encourages the presence of at least three initial replicas, which you create. A  consensus  can
       then  be  reached  as  long as at least two of the three replicas are available. If there is only one replica and the system crashes, it is
       possible that all metadevice configuration data can be lost.

       The majority consensus algorithm is conservative in the sense that it will fail if a majority consensus cannot  be  reached,  even  if  one
       replica	actually does contain the most up-to-date data. This approach guarantees that stale data will not be accidentally used, regardless
       of the failure scenario.  The majority consensus algorithm accounts for the following: the system will stay running with  exactly  half	or
       more  replicas; the system will panic when less than half the replicas are available; the system will not reboot without one more than half
       the total replicas.

       When used with no options, the metadb command gives a short form of the status of the metadevice state  database.  Use  metadb  -i  for	an
       explanation of the flags field in the output.

       The  initial state database is created using the metadb command with both the -a and -f options, followed by the slice where the replica is
       to reside. The -a option specifies that a replica (in this case, the initial) state database should be created. The -f  option  forces  the
       creation to occur, even though a state database does not exist. (The -a and -f options should be used together only when no state databases
       exist.)

       Additional replicas beyond those initially created can be added to the system. They contain the same information as the existing  replicas,
       and  help to prevent the loss of the configuration information. Loss of the configuration makes operation of the metadevices impossible. To
       create additional replicas, use the metadb -a command, followed by the name of the new slice(s) where the replicas will reside. All  repli-
       cas that are located on the same slice must be created at the same time.

       To delete all replicas that are located on the same slice, the metadb -d command is used, followed by the slice name.

       When  used  with  the  -i option, metadb displays the status of the metadevice state databases. The status can change if a hardware failure
       occurs or when state databases have been added or deleted.

       To fix a replica in an error state, delete the replica and add it back again.

	The metadevice state database (mddb) also contains a list of the replica locations for this set (local or shared diskset).

       The local set mddb can also contain host and drive information for each of the shared disksets of which this node is a member.  Other  than
       the diskset host and drive information stored in the local set mddb, the local and shared diskset mddbs are functionality identical.

       The  mddbs  are	written  to during the resync of a mirror or during a component failure or configuration change. A configuration change or
       failure can also occur on a single replica (removal of a mddb or a failed disk) and this causes the other replicas to be updated with  this
       failure information.

OPTIONS

       Root privileges are required for all of the following options except -h and -i.

       The following options can be used with the metadb command. Not all the options are compatible on the same command line. Refer to the SYNOP-
       SIS to see the supported use of the options.

       -a	       Attach a new database device. The /kernel/drv/md.conf file is automatically  updated  with  the	new  information  and  the
		       /etc/lvm/mddb.cf  file  is  updated as well. An alternate way to create replicas is by defining them in the /etc/lvm/md.tab
		       file and specifying the assigned name at the command line in the form, mddbnn, where nn is a two-digit number given to  the
		       replica definitions. Refer to the md.tab(4) man page for instructions on setting up replicas in that file.

       -c number       Specifies the number of replicas to be placed on each device. The default number of replicas is 1.

       -d	       Deletes	all  replicas  that are located on the specified slice. The /kernel/drv/md.conf file is automatically updated with
		       the new information and the /etc/lvm/mddb.cf file is updated as well.

       -f	       The -f option is used to create the initial state database. It is also used to force the deletion  of  replicas	below  the
		       minimum of one. (The -a and -f options should be used together only when no state databases exist.)

       -h	       Displays a usage message.

       -i	       Inquire	about the status of the replicas. The output of the -i option includes characters in front of the device name that
		       represent the status of the state database. Explanations of the characters are displayed following the replica  status  and
		       are as follows:

		       d		       replica does not have an associated device ID.

		       o		       replica active prior to last mddb configuration change

		       u		       replica is up to date

		       l		       locator for this replica was read successfully

		       c		       replica's location was in /etc/lvm/mddb.cf

		       p		       replica's location was patched in kernel

		       m		       replica is master, this is replica selected as input

		       r		       replica does not have device relocation information

		       t		       tagged data is associated with the replica

		       W		       replica has device write errors

		       a		       replica is active, commits are occurring to this

		       M		       replica had problem with master blocks

		       D		       replica had problem with data blocks

		       F		       replica had format problems

		       S		       replica is too small to hold current database

		       R		       replica had device read errors

		       B		       tagged data associated with the replica is not valid

       -k system-file  Specifies  the  name  of  the kernel file where the replica information should be written. The default system-file is /ker-
		       nel/drv/md.conf. This option is for use with the local diskset only.

       -l length       Specifies the size of each replica. The default length is 8192 blocks, which should be appropriate for most configurations.
		       "Replica sizes of less than 128 blocks are not recommended.

       -p	       Specifies  updating  the system file (/kernel/drv/md.conf) with entries from the /etc/lvm/mddb.cf file. This option is nor-
		       mally used to update a newly built system before it is booted for the first time.  If the system has been built on a system
		       other  than  the  one where it will run, the location of the mddb.cf on the local machine can be passed as an argument. The
		       system file to be updated can be changed using the -k option. This option is for use with the local diskset only.

       -s setname      Specifies the name of the diskset on which the metadb command will work. Using the -s option will cause the command to per-
		       form  its  administrative function within the specified diskset. Without this option, the command will perform its function
		       on local database replicas.

       slice	       Specifies the logical name of the physical slice (partition), such as /dev/dsk/c0t0d0s3.

EXAMPLES

       Example 1: Creating Initial State Database Replicas

       The following example creates the initial state database replicas on a new system.

       # metadb -a -f c0t0d0s7 c0t1d0s3 c1t0d0s7 c1t1d0s3

       The -a and -f options force the creation of the initial database and replicas. You could then create metadevices with  these  same  slices,
       making efficient use of the system.

       Example 2: Adding Two Replicas on Two New Disks

       This example shows how to add two replicas on two new disks that have been connected to a system currently running Volume Manager.

       # metadb -a c0t2d0s3 c1t1d0s3

       Example 3: Deleting Two Replicas

       This  example  shows  how  to  delete  two  replicas  from  the	system.  Assume  that  replicas  have been set up on /dev/dsk/c0t2d0s3 and
       /dev/dsk/c1t1d0s3.

       # metadb -d c0t2d0s3 c1t1d0s3

       Although you can delete all replicas, you should never do so while metadevices still exist. Removing all replicas causes  existing  metade-
       vices to become inoperable.

FILES

       /etc/lvm/mddb.cf 	       Contains the location of each copy of the metadevice state database.

       /etc/lvm/md.tab		       Workspace file for metadevice database configuration.

       /kernel/drv/md.conf	       Contains database replica information for all metadevices on a system. Also contains Solaris Volume Manager
				       configuration information.

EXIT STATUS

       The following exit values are returned:

       0	successful completion

       >0	an error occurred

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWmdr			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       mdmonitord(1M), metaclear(1M), metadetach(1M), metahs(1M), metainit(1M), metaoffline(1M), metaonline(1M),  metaparam(1M),  metarecover(1M),
       metarename(1M),	metareplace(1M), metaroot(1M), metaset(1M), metassist(1M), metastat(1M), metasync(1M), metattach(1M), md.tab(4), md.cf(4),
       mddb.cf(4), md.tab(4), attributes(5), md(7D)

       Solaris Volume Manager Administration Guide

NOTES

       Replicas cannot be stored on fabric-attached storage, SANs, or other storage that is not directly attached to the system. Replicas must	be
       on storage that is available at the same point in the boot process as traditional SCSI or IDE drives. A replica can be stored on a:

	 o  Dedicated local disk partition

	 o  Local partition that will be part of a volume

	 o  Local partition that will be part of a UFS logging device

SunOS 5.10							    14 Sep 2004 							metadb(1M)