I setup a RAID 5 with 5 drives, one failed, hardware failure so I physically removed it from the raid after powering the machine off then powered it back on and my raid was still good but no 5th drive. I built a 5th drive from scratch and added it in the raid thinking the raid would go into... (0 Replies)
Hey Guys
I have an Ubuntu CD and I was thinking of creating like a bootable hard drive with various OS so that I can just boot OSs with t drive and not require the CDs. I was just wondering is there a way I can do this, like have Ubuntu boot from a USB stick? If yes how is that possible(even if I... (3 Replies)
Hi all,
First post so be gentile :)
It's my first time installing Solaris on T2000 server.
I have 2 72GB HD's on it.
After configuring HW raid and running raidctl command I get this output:
bash-3.00# raidctl -l c0t0d0
Volume Size Stripe Status Cache RAID
... (2 Replies)
Hi,
We have a Sunfire 4150 with On-Board Internal Raid Controller connected to 4 X 146 GB SAS disks.
This also has an External Raid Controller (Storagetek Eight-Port, External HBA
Model SG-XPCIESAS-R-EXT-Z) connected to a JBOD array ( Storagetek XTA2530 ) which has 5 X 300 GB Hard disk.
... (1 Reply)
Hi,
I need to override ioctl operation for a few USB drivers (sierra, option, cdc-acm) on Linux Ubuntu 2.6.34sb2 to support TIOCOUTQ command.
Unfortunately, none of the drivers I mentioned above support TIOCOUTQ because it seems unclear to know amount of data inside a modem.
Does Linux... (12 Replies)
I am trying to dual boot on an external USB 500GB drive using my laptop.I have Windows 7 installed and booting on 1st partition 230GB now as active primary, 2nd partition is 100GB as primary, and 3rd partition is 135GB as primary. I was intending on installing Ubuntu onto the 2nd partition. I read... (12 Replies)
Hello all,
I am looking for a way to copy the existing Ubuntu server 12.04 to a USB (with all the packages and such) and make it boot from the USB.
I have seen other threads about copying the CD image to the USB, which is not exactly I am looking for.
Before I start diving into anything I... (4 Replies)
I'd like to install the OS on my stick. I would like to be able to save my works there and install apps or customize the OS.
What can I do
Ps. At home I use an iMac, but in the school where I work there are only PC...
Ty (2 Replies)
Hi guys,
I'm new to RAID although I've had a server running raid5 for a while. It was delivered preinstalled like this and I never really wondered how to monitor and maintain it. This quick introduction just to let you understand why I'm such an idiot asking such a silly question.
Now what... (0 Replies)
Discussion started by: chebarbudo
0 Replies
LEARN ABOUT DEBIAN
fdformat
FDFORMAT(8) System Administration FDFORMAT(8)NAME
fdformat - low-level format a floppy disk
SYNOPSIS
fdformat [options] device
DESCRIPTION
fdformat does a low-level format on a floppy disk. device is usually one of the following (for floppy devices the major = 2, and the minor
is shown for informational purposes only):
/dev/fd0d360 (minor = 4)
/dev/fd0h1200 (minor = 8)
/dev/fd0D360 (minor = 12)
/dev/fd0H360 (minor = 12)
/dev/fd0D720 (minor = 16)
/dev/fd0H720 (minor = 16)
/dev/fd0h360 (minor = 20)
/dev/fd0h720 (minor = 24)
/dev/fd0H1440 (minor = 28)
/dev/fd1d360 (minor = 5)
/dev/fd1h1200 (minor = 9)
/dev/fd1D360 (minor = 13)
/dev/fd1H360 (minor = 13)
/dev/fd1D720 (minor = 17)
/dev/fd1H720 (minor = 17)
/dev/fd1h360 (minor = 21)
/dev/fd1h720 (minor = 25)
/dev/fd1H1440 (minor = 29)
The generic floppy devices, /dev/fd0 and /dev/fd1, will fail to work with fdformat when a non-standard format is being used, or if the for-
mat has not been autodetected earlier. In this case, use setfdprm(8) to load the disk parameters.
OPTIONS -n, --no-verify
Skip the verification that is normally performed after the formatting.
-V, --version
Output version information and exit.
-h, --help
Display help and exit.
SEE ALSO fd(4), setfdprm(8), mkfs(8), emkfs(8)AUTHOR
Werner Almesberger (almesber@nessie.cs.id.ethz.ch)
AVAILABILITY
The fdformat command is part of the util-linux package and is available from ftp://ftp.kernel.org/pub/linux/utils/util-linux/.
util-linux July 2011 FDFORMAT(8)