Patching failed on Sun T2000 Post: 302696069

10 More Discussions You Might Find Interesting

1. SuSE

FAILED during patching kernel sources

Hi all. I have an issue with kernel patching. My system: OpenSuse 10.2, kernel version: 2.6.18.2. I've downloaded the patch from kernel.org - 2.6.26. I've invoked the following command: "patch -p1 -f < patch-2.6.26" (-f - because some files are not exist. to automatically skip this issues)....

2. Solaris

Sun Sparc T2000 + StorageTek 2540 - Help, I'm lost

I have a Sun Sparc T2000 (Solaris 10 05-08) and have installed a PCI-X 4GB Single Port HBA card in it. I have one StorageTek 2540 array that I would like to connect to the T2000. For the moment it would be a single path connection, but I've ordered a 2nd HBA, so eventually it would be...

3. Solaris

Error while trying to boot from cdrom on Sun Fire T2000

Hi Guyz, I recently downloaded sol-10-u6-ga1-sparc-dvd.iso from Sun. I burned the disk as cd .iso. When trying to boot at the ok> boot cdrom i get the following error: ----------------------------------------------------------------------- Boot device:...

4. Solaris

Sun Server T2000 occasionally reboot

Hi, i am really 'fresh' to Solaris or any UNIX OS. My role as web developer but i need slightly involve to Solaris support. It is harder for me to understand it and i recently encounter a problems. /var file system (/dev/md/rdsk/d425) is being checked. run fsck -F ufs /dev/md/rdsk/d425 ...

5. Solaris

Auto boot problem on Sun T2000

Hi All I have a problem on T2000 server. bash-3.00# uname -a SunOS 5.10 aaa Generic_120011-14 sun4v sparc SUNW,Netra-T2000After the initial solaris installation server failed to boot: Rebooting with command: boot Boot device: disk:b File and args: The file just loaded does not appear...

6. Solaris

locator led SUN T2000

Hi Guys, I am unable to turn on the locator led light on a SUN T2000 machine # uname -a SunOS node1 5.10 Generic_137137-09 sun4v sparc SUNW,Sun-Fire-T200 when i try to turn it on I have following error. # locator -n 'system' locator not found Although the hardware specfication...

7. Solaris

Sun T2000 question

This may be a stupid question, but I don't want to take any chances. I have a Sun T2000 in production. I want to run the "resetsc" command on the ALOM controller to active an IP address change. Will resetting ALOM affect the running OS? Thanks

8. Hardware

Hardware RAID on Sun T2000 Server

Hi All I have a Sun T2000 server. Couple of years ago I had configured and mirrored the boot drive with an other drive using hardware RAID 1 using raidctl command. Following is the hardware RAID output. root@oracledatabaseserver / $ raidctl RAID Volume RAID RAID Disk...

9. Solaris

Sun T2000 error codes

I got a Power supply failure. I replaced the power supply and still got the error. Any ideas on what I should try next?

10. Emergency UNIX and Linux Support

Solaris 10 patching failed

I was installing Solaris-10 Recommended patch Cluster and it came out without installling all patches. I gave a rebooted and tried installing it again, but it seems some lock or something is prevenventing to install further patches. I am not able to figure out and I am struck in between...

LEARN ABOUT NETBSD

hme

HME(4)							   BSD Kernel Interfaces Manual 						    HME(4)

NAME

     hme -- Sun Microelectronics STP2002-STQ Ethernet interfaces device driver

SYNOPSIS

     hme* at pci? dev ? function ?
     hme* at sbus? slot ? offset ?

DESCRIPTION

     The hme driver supports Sun Microelectronics STP2002-STQ Fast Ethernet interfaces.

HARDWARE

     The hme driver supports the on-board Ethernet interfaces of many Sun UltraSPARC workstation and server models.

     Cards supported by the hme driver include:

     Sun PCI SunSwift Adapter (``SUNW,hme'')
     Sun SBus SunSwift Adapter (``hme'' and ``SUNW,hme'')
     Sun PCI Sun100BaseT Adapter 2.0 (``SUNW,hme'')
     Sun SBus Sun100BaseT 2.0 (``SUNW,hme'')
     Sun PCI Quad FastEthernet Controller (``SUNW,qfe'')
     Sun SBus Quad FastEthernet Controller (``SUNW,qfe'')

     The STP2002 family supports hardware checksumming to assist in computing IPv4 TCP/UDP checksums.  The hme driver supports this feature of the
     chip.  See ifconfig(8) for information on how to enable this feature.

SEE ALSO

     ifmedia(4), intro(4), mii(4), ukphy(4), ifconfig(8)

     Sun Microelectronics, STP2002QFP Fast Ethernet, Parallel Port, SCSI (FEPS) User's Guide,
     http://mediacast.sun.com/users/Barton808/media/STP2002QFP-FEPs_UG.pdf, April 1996.

HISTORY

     The hme driver first appeared in NetBSD 1.5.

AUTHORS

     The hme driver was written by Paul Kranenburg <pk@NetBSD.org>.

BUGS

     Connecting a MII transceiver on those cards that support it will cause the RJ45 connector to be detected as PHY instance 1, instead of the
     default instance 0.

BSD
								   June 23, 2012							       BSD