That was a great catch! Although I was running it as root , I was NOT running the mount command from the root folder. Now when I run it -
I have a bad feeling that there's something wrong with the partition tables. Appreciate your help!
Can sed be used to take a existing record and reverse the order of defined character placement if there is no delimeters?
existing record:
0123456789CO
expected result:
9876543210CO
if there were delimeters I could define the delimeter and each placement would have an id which I... (1 Reply)
Hello, I am aware that our system has two hard drives with raid but i'm not sure as to the type of raid the system uses.
I tried this.
# df
Filesystem 512-blocks Free %Used Iused %Iused Mounted on
/dev/hd4 229376 76272 67% 6748 12% /
/dev/hd2 3080192... (1 Reply)
Dear ALl,
I have a RAID 5 volume which is as below
d120 r 60GB c1t2d0s5 c1t3d0s5 c1t4d0s5 c1t5d0s5
d7 r 99GB c1t2d0s0 c1t3d0s0 c1t4d0s0 c1t5d0s0
d110 r 99GB c1t2d0s4 c1t3d0s4 c1t4d0s4 c1t5d0s4
d8 r 99GB c1t2d0s1 c1t3d0s1... (2 Replies)
Hello All,
I have read enough of texts on Raid 01 and Raid 10 on solaris :wall: . But no-where found a way to create them using SVM. Some one pls tell me how to do or Post some link if that helps.
TIA
Curious
solarister (1 Reply)
Hello,
I have a scsi pci x raid controller card on which I had created a disk array of 3 disks
when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk )
suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Server Model: T5120 with 146G x4 disks.
OS: Solaris 10 - installed on c1t0d0.
Plan to use software raid (veritas volume mgr) on c1t2d0 disk.
After format and label the disk, still not able to detect using vxdiskadm.
Question:
Should I remove the hardware raid on c1t2d0 first?
My... (4 Replies)
Hello,
I want to delete a RAID configuration an old server has.
Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton?
I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
Discussion started by: @dagio
0 Replies
LEARN ABOUT NETBSD
ataraid
ATARAID(4) BSD Kernel Interfaces Manual ATARAID(4)NAME
ataraid -- software BIOS RAID
SYNOPSIS
pseudo-device ataraid
ld* at ataraid? vendtype ? unit ?
DESCRIPTION
The ataraid driver provides support for BIOS-based software RAID controllers. These are devices which have some simple support for several
basic RAID levels (often RAID 0 and RAID 1), but which require software support to actually perform the RAID function. The BIOS support is
largely just to create and recognize the array so that it may be a boot device.
The driver currently supports RAID formats from:
o Adaptec HostRAID (found in Intel 6300ESB)
o Intel MatrixRAID
o JMicron RAID
o nVidia MediaShield
o Promise FastTrak
o Via V-RAID (found in many VIA-based motherboards)
Status of the logical disk as well as the disks associated with it, can be viewed through the bioctl(8) utility.
SEE ALSO ld(4), bioctl(8)HISTORY
The ataraid driver first appeared in NetBSD 2.0.
AUTHORS
The ataraid driver was originally adapted from FreeBSD by Jason Thorpe <thorpej@NetBSD.org>.
BUGS
Not all features of the software RAID are currently recognized or supported. For example, the Adaptec support doesn't recognize when a RAID
1 should be in a ``building'' state, and it does not do the right thing.
At least part of the reason for this is that the publically-available information on these formats is quite limited.
BSD September 16, 2008 BSD