Hi all,
I have one more query related to AWK. I have the following csv data:
,qwertyA, field1, field2, field3, field4, field5, field6
,,,,,,,,,,,,,,,,,,,100,200
,,,,,,,,,,,,,,,,,,,300,400
,qwertyB, field1, field2, field3, field4, field5, field6
,,,,,,,,,,,,,,,,,,,100,200... (9 Replies)
Hi ,
If I match a word in a file, I want to pick the next line of that matched word.
My file is a below format-
The ntrag trace has auditError
Line5005 contains transaction Ntrag data
------------
Here I wanted if I match a word auditError, I need to get the next line
"Line5005... (10 Replies)
hi ,
while running this script i am getting below error:
Syntax error at line 11 : `for' is not matched.
here is program:
#! /bin/ksh
sqlplus -s << !+!
user/password
update GR_SUB_SCRIPT_PC set act_del_ind='0';
commit;
exit;
!+!
cd /home/salunke/pvcsfiles/source_files
for i in... (5 Replies)
I have the following text format in a file which lists the question first and then 5 choices
after that the explanantion and finally the answer.
1.The amount of time it takes for most of a worker’s occupational knowledge and skills to become
obsolete has been declining because of the... (2 Replies)
Hi,
I read the book of <<unix shell programming>>. The regular expression ^\(.\)\1 matches the first character on the line and stores it in register 1. Then the expression matches whatever is stored in the register 1, as specified by the \1. The net effect of this regular expression is to match... (2 Replies)
Hi Experts,
Help needed on joining one line above & below to the pattern matched string line.
The input file, required output is mentioned below
Input file
ABCD DEFG5 42.0.1-63.38.31
KKKK iokl IP Connection Available
ABCD DEFG5 42.0.1-63.38.31
... (7 Replies)
Hello:
(exp) : match "exp",the matched text is stored in auto named arrays.
How can I get the matched text ? What is the name of the auto named arrays on linux shell ? (4 Replies)
hi All ,
I am having a large file with lots of modules as shown below
###############################################
module KKK
kksd
kskks
jsn;lsm
jsnlsn;
Ring
jjsjsj
kskmsm
jjs
endmodule
module llll
1kksd11
k232skks
j33sn;l55sm (6 Replies)
Hello,
I have below format log file,
Comparing csv_converted_files/2201/9747.1012H67126.5077292103609547345.csv and csv_converted_files/22019/97447.1012H67126.5077292103609547345.csv
Comparing csv_converted_files/2559/9447.1012H67126.5077292103609547345.csv and... (6 Replies)
Discussion started by: arvindshukla81
6 Replies
LEARN ABOUT SUSE
ifndp-proxy
IFNDP-PROXY(5) Network configuration IFNDP-PROXY(5)NAME
ifndp-proxy[-<interface name>] - IPv6 NDP and IPv4 ARP proxy entries
SYNOPSIS
/etc/sysconfig/network/ifndp-proxy
/etc/sysconfig/network/ifndp-proxy-<interface name>
DESCRIPTION
These files contain IPv6 NDP and IPv4 ARP proxy settings, that should be applied using the ip neigh add proxy command documented in the
ip(8) manual page that provides a common interface for IPv4 and IPv6.
The NDP/ARP proxy is required, e.g. when IP addresses from the same subnet have to be used on the interface of the host as well as on
interfaces behind a (tunnel) interface and using a bridge is not an option.
Don't forget to enable forwarding and the NDP/ARP proxy by setting
net.ipv6.conf.<all|default|interface name>.proxy_ndp = 1
net.ipv6.conf.<all|default|interface name>.forwarding = 1
and/or
net.ipv4.conf.<all|default|interface name>.proxy_arp = 1
net.ipv4.conf.<all|default|interface name>.forwarding = 1
or
net.ipv4.ip_forward = 1
either as global all setting in the /etc/sysctl.conf file or using the ifsysctl(5) files, that allow per-interface setup.
Forwarding can be also enabled in the /etc/sysconfig/sysctl file using the IP_FORWARD and IPV6_FORWARD variables.
The proxy entries are added and deleted using the if-{up|down}.d/ndp-proxy script, every time after an involved interface has been set
up or down.
SYNTAX
The format of the ifndp-proxy file is:
<address> <address interface> <proxy interface list>
The format of the ifndp-proxy-<address interface> file is same to above, but allows also to omit the address interface by using a "-" as
placeholder inside of the file, because it is already available in the file name:
<address> <address interface | -> <proxy interface list>
Lines beginning with # and blank lines are ignored.
Each line defines to add a proxy NDP/ARP entry with the address of or behind address interface to all interfaces in the proxy interface
list.
EXAMPLES
Let's assume, your machine is connected via eth0 to a switch with the networks 2001:db8:abba::/64 and 192.168.100.1/24 and is using the IP
address 1 itself. You'd like to use the addresses 11 and 12 e.g. for virtual machines behind the tap1 and tap2 interface, that is:
2001:db8:abba::1/64 -- local eth0 address
2001:db8:abba::11/64 -- address behind tap1
2001:db8:abba::12/64 -- address behind tap2
192.168.100.1/24 -- local eth0 address
192.168.100.11/24 -- address behind tap1
192.168.100.12/24 -- address behind tap2
then set up the following entries in the ifndp-proxy file:
2001:db8:abba::1 eth0 tap1 tap2
2001:db8:abba::11 tap1 eth0 tap2
2001:db8:abba::12 tap2 eth0 tap1
192.168.100.1 eth0 tap1 tap2
192.168.100.11 tap1 eth0 tap2
192.168.100.12 tap2 eth0 tap1
additionally to the routing entries in the routes or ifroute-<interface name> files.
BUGS
Please report bugs at <https://bugzilla.novell.com/>
AUTHOR
Marius Tomaschewski <mt@suse.de>
SEE ALSO ifup(8)ifcfg(5)ifsysctl(8)sysconfig December 2009 IFNDP-PROXY(5)