Hi,
We recently purchased a 3 tb RAID. In the setup, it created 2 slices, one 2 tb and one 1 tb slice. Right now only the 2 tb slice is visible when booting up. I was told that the second slice needs to be mapped to a lun and a port like the first slice is.
Does anyone know how I would go... (1 Reply)
I have a list of LUN ID, my task is to find if disk has been added or not. How do I do that? I have been searching the forum and not able to find answer.
thanks (4 Replies)
Good day!
I’m a beginner HP-UX administrator. I have a task to create mulitipassing (I can mistake in this word) to new 3 disks which connected to my server from EVA. It is my first task to work with Secure Path. I have read what command I need to execute, but I don’t know, how to get the WWNN... (2 Replies)
Hello all,
I have the following env:
* DS4300 storage SAN
* AIX 5.3 Lpar (storage through vio server)
* AIX 5.3 Server
Some FS are too small do I'm setting up a process to increase the size of the FS.
To expand the size of the FS I plan to do the following for the physical AIX server,... (1 Reply)
Hi,
Is there command to detect the newly added LUN is linux box. I tried with below commands, but that doesn't work out.
fdisk -l,
fdisk -l | grep Disk
pvscan (5 Replies)
Hi,
I have presented a LUN from my EVA 4400 to a RHEL server.
The server sees 4 paths to the LUN which I can see from fdisk.
If I want to add this LUN to my OS i.e.
# fdisk /dev/sd???
....which actual device do I run fdisk against?
I am running multipath so is there... (12 Replies)
I have a LUN (From HP-Storage VA7110) that is claimed on 2 servers, but is in used in one of the VG on Server-1 .
Now I want to shut Server-1 and re-use that LUN on server-2 .
Server-1
Path-1 : /dev/rdsk/c4t0d1
Path-2: /dev/rdsk/c6t0d1
Server-2
Path-1: /dev/rdsk/c5t0d1
Path-2:... (8 Replies)
Good afternoon!
Help with a solution
I have AIX 7.1
works through vios
I expanded Lun
that it is necessary to make that aix saw this change and to expand the section lvm
Sorry for my English (1 Reply)
Discussion started by: iformats
1 Replies
LEARN ABOUT SUSE
tgt-setup-lun
tgt-setup-lun(8) System Manager's Manual tgt-setup-lun(8)NAME
tgt-setup-lun - creates a target, adds a device to the target and defines initiators that can connect to the target
SYNOPSIS
tgt-setup-lun -d device -n target_name [initiator_IP1 initiator_IP2 ...] [-h]
DESCRIPTION
Starts tgtd if necessary and creates a target according to the supplied target_name. The format of the target name is as follows:
iqn.2001-04.com.<hostname>-<target_name> The target name must be unique.
The script then adds the requested device to the target. If specific IP addresses are defined, it adds them to the list of allowed initia-
tors for that target. If no IP addresses is defined, it defines that the target accepts any initiator.
EXAMPLES
Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81:
tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81
Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81 and 192.168.10.82:
tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81 192.168.10.82
Create a target that uses /dev/sdb1 and allows connections from any initiator:
tgt-setup-lun -d /dev/sdb1 -n my_target
Display help:
tgt-setup-lun -h
AUTHOR
Written by Erez Zilber
REPORTING BUGS
Report bugs to <erezz@voltaire.com>.
COPYRIGHT
Copyright (C) Voltaire Ltd. 2008.
tgt-setup-lun(8)