How not to install fibre links between data centres! Post: 302688021

7 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

How to install FreeBSD without loosing my data?

hi. I am newbie in Unix. I wanted to install Free BSD 5.2.1 to my computer which winXp was already installed. But i couldn't. I chose Standard. Then it said you are going to use dos style fdisk partitioning. Then a window displayed begining like this. WARNING: A geometry of 155127/16/63 for...

2. Shell Programming and Scripting

4 x fibre cards elimination

Hi, I have variables like mentioned below and want to separate as mentioned in output. var1="4 x fibre cards" var2="2 fibre cards" var3="6 - fibre cards" var4="4 x dual-port" I have variables like this.I want to separate numbers from this and fibre cards from this. output has to be...

3. AIX

Install Fibre Card AIX 5.3

Hello, I have two systems that are being prepared to be SAN attached .. can anyone tell me any specific checks I should perform prior to the cards being installed... I am aware of firmware / OS level and relevant drivers, is there anything else? thanks Chris.

4. Solaris

Hard Links and Soft or Sym links

When loooking at files in a directory using ls, how can I tell if I have a hard link or soft link?

5. AIX

List all the soft links and hard links

Hi I'm logged in as root in an aix box Which command will list all the soft links and hard links present in the server ?

6. Hardware

Fibre Channel HBA recommendations?

We will be buying new Xeon E5-based servers for our datacenter and were wondering which Fibre Channel host bus adapters we should select for these. The choices are Emulex or QLogic (8Gb FC HBAs). Anybody have any recommendations on which is the better choice? Thanks in advance.

7. AIX

VIOS - fibre adapters not seeing luns

Hi guys, I've been trying to tackle this issue for days and I'm stumped. Hopefully someone can give more light on what else I can do. I have a p7 series box, with dual VIOS and 10 lpars and everything was working fine until I had to move the box to another location in the data centre. Ensured...

LEARN ABOUT NETBSD

icp

ICP(4)							   BSD Kernel Interfaces Manual 						    ICP(4)

NAME

     icp -- ICP-Vortex and Intel Storage RAID driver

SYNOPSIS

     icp* at pci? dev ? function ?
     ld* at icp? unit ?
     icpsp* at icp? unit ?
     scsibus* at icpsp?

DESCRIPTION

     The icp driver provides support for the newer (post 1997) ICP-Vortex GDT and Intel Storage RAID controllers.

     The ld driver provides access to logical devices (disk arrays) presented by the controller.  The icpsp driver provides direct access to other
     SCSI devices attached to the controller, such as tape or CD-ROM drives.

DIAGNOSTICS

     pci_mem_find: expected mem type 00000000, found 00000002
		   This message may be displayed during autoconfiguration if the controller's memory is mapped below 1MB in physical address
		   space.  This can be disabled either through changing a setting in the controller's BIOS utility, or changing the position of a
		   jumper on the board.  See your controller's documentation for more information.

SEE ALSO

     intro(4), ld(4), scsi(4)

HISTORY

     The icp driver first appeared in NetBSD 1.6, and was based on the FreeBSD and OpenBSD drivers of the same name.

BUGS

     ISA & EISA front-ends and a management interface are needed.

     Older PCI boards are not yet supported.

BSD
								  April 20, 2002							       BSD

7 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

How to install FreeBSD without loosing my data?

Discussion started by: sualcavab

2. Shell Programming and Scripting

4 x fibre cards elimination

Discussion started by: ajilesh

3. AIX

Install Fibre Card AIX 5.3

Discussion started by: chlawren

4. Solaris

Hard Links and Soft or Sym links

Discussion started by: Harleyrci