Okay:
The first line:
This lists all the databases and then greps and removes all extraneous information leaving me with only the database alias so instead of:
Quote:
Database 12 entry:
Database alias = Alias_Name
Database name = Alias_Name
Local database directory = /db2/some/directory
Database release level =
Comment =
Directory entry type = Indirect
Catalog database partition number = 0
Alternate server hostname =
Alternate server port number =
I get just the Alias_Name which is something I can work with.
The next line:
Lets the script know if the database is in a state that can be backed up.
After all that, the following line does the actual work:
with $db being the listed database aliases.
Hope that helps.
---------- Post updated at 01:37 PM ---------- Previous update was at 11:04 AM ----------
Through quizzing my co-workers and a lot of testing, this is the solution we came up with:
Thanks!
Last edited by Clay Lovett; 08-16-2012 at 12:08 PM..
Reason: Sentences out of order and made no sense.
Hello everyone,
I need to make a OS full backup. I am using the vdump command but first, I must to switch to the single-user mode.
I am working on a Compaq Tru64 Unix V4.0G.
Please, could somebody tell me which is/are the commands to do it?
I appreciate your help
Gastón (1 Reply)
Hi,
Is it possible to read every 2 lines as single record, I have a file like below,
~CZK ~TSCHECHISCHE KRONE ~TSCHECH. REPUBLIK
Dec 1 2005 12:00AM~ 10.840000~
~DKK ~DAENISCHE KRONE ~DAENEMARK
Dec 2 2005 12:00AM~ ... (9 Replies)
Hi all
I've been working on a bash script parsing through debug/trace files and extracting all lines that relate to some search string. So far, it works pretty well. However, I am challenged by one requirement that is still open.
What I want to do:
1) parse through a file and identify all... (3 Replies)
Hi,
I've some files with the following data and i need to convert the lines between the separator ---, into a single line. I've tried with the paste cmd but my main problem is that the number of lines between the separator is not fix, it can very between 1-4 lines.
Input
---
2010-02-22... (4 Replies)
Hi,
I will use below command for grep single string ("osuser" is search string)
ex: find . -type f | xarg grep -il osuser
but i have one more string "v$session"
here i want to grep in which file these two strings are present.
any help is appreciated,
Thanks in advance.
Gagan (2 Replies)
Hi All
Is it possible to be connected to a corporate lan/wan through the on-baord nic, and also be connected to mobile wan through a tethered smartphone?
Ideally I'd like to be able to use my own smartphone using a browser like chrome (private browsing) while still being able to use the... (3 Replies)
Hi,
I have a requirement with,
No~Dt~Notes
1~2011/08/1~"aaa
bbb
ccc
ddd
eee
fff
ggg
hhh"
Single column alone got splitted into multiple lines.
I require the output as
No~Dt~Notes
1~2011/08/1~"aaa<>bbb<>ccc<>ddd<>eee<>fff<>ggg<>hhh"
mean to say those new lines to be... (1 Reply)
Hello Guys,
I have a small loop problem as below.
I have 3 different values to be used while running the same script -
va1="some-value1"
va2="some-value2"
va3="some-value3"
Now I want to use these three variable values to be used for running the same command, like -
while... (1 Reply)
I am using Solaris8, userA's shell '/usr/ace/prog/sdshell', AppuserB's shell '/bin/ksh'.
serverT:/home/userA>LC_CTYPE=iso_8859_1; export LC_CTYPE; vtemp='userA variable'; export vtemp
serverT:/home/userA>echo "LC_CTYPE=$LC_CTYPE, vtemp=$vtemp";
LC_CTYPE=iso_8859_1, vtemp=userA... (4 Replies)
Discussion started by: kchinnam
4 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)