I have a X86 server (solaris 10) with 4 similar disks. One of these 4 disks is the root disk.
I need to create a mirror disk to the root disk and two hot spares using the remaining 3 disks.
However, when I use the fmthard commad, I am getting the below error:
I checked the size of all the 4 disks and they are same. See below 'iostat -E' output:
Code:
sd1 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: HITACHI Product: H106030SDSUN300G Revision: A2B0 Serial No: 1208N30TGB
Size: 300.00GB <299999999488 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
sd5 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: HITACHI Product: H106030SDSUN300G Revision: A2B0 Serial No: 1208N35REB
Size: 300.00GB <299999999488 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
sd6 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: HITACHI Product: H106030SDSUN300G Revision: A2B0 Serial No: 1208N2PVEB
Size: 300.00GB <299999999488 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
sd7 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: HITACHI Product: H106030SDSUN300G Revision: A2B0 Serial No: 1208N3184B
Size: 300.00GB <299999999488 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
When I checked the partition tables of the root disks then it had 46870 cylinders for the same size slice (279.37G), while the other disks had 36468 cylinders for this slice of 279.37G.
Hey guys, need some help. Running AIX Version 5.2 and one of our cron jobs is writing errors to a log file. Any ideas on the following error message.
Error: Internal system error: Unable to initialize standard output file
I'm guessing more info might be needed, so let me know.
Thanks (2 Replies)
hi there
i write one awk script file in shell programing
the code is related to dd/mm/yy to month, day year format
but i get an error
please can anybody help me out in this problem ??????
i give my code here including error
awk `
# date-month -- convert mm/dd/yy to month day,... (2 Replies)
--------------------------------------------------------------------------------
Hello, help me please.
I am trying to create a mksysb bakup using nim. I am geting this error, how to correct it ? :
Command : failed stdout: yes stderr: no... (9 Replies)
Hi all,
I am trying to use the disk for mirror where in the mirror disk is of 160 gb and the rootdisk is of 80 gb. when i am trying to write the vtoc i am getting below error
i tried the below command
#prtvtoc /dev/rdsk/c0t0d0s0 |fmthard -s -/dev/rdsk/c0t2d0s0
and got below
... (26 Replies)
Hi - I am getting the error
`Error reading response length from authentication socket'
when I ssh from my cluster to another cluster, and then back to my cluster. It doesn't seem to affect anything, but it's just annoying that it always pops up and tends to confuse new users of the cluster. I... (1 Reply)
im kinda new to shell scripting so i need some help
i try to run this script and get the error code
> 5 ")syntax error: operand expected (error token is "
the code for the script is
#!/bin/sh
#
# script to see if the given value is correct
#
# Define errors
ER_AF=86 # Var is... (4 Replies)
what is this error log = hda: irq timeout: error=0x00 and how to solve?
every day upon checking the logs i see this error.
hda: irq timeout: error=0x00
hda: irq timeout: error=0x00
hda: irq timeout: error=0x00
hda: irq timeout: error=0x00
hw_client: segfault at 0000000000000046 rip... (3 Replies)
I have two servers with a fresh install of Solaris 11, and having problems when doing rpcinfo between them. There is no firewall involved, so everything should theoretically be getting through. Does anyone have any ideas? I did a lot of Google searches, and haven't found a working solution yet.
... (2 Replies)
I am writing a shell script with 2 run time arguments. During the execution if i got any error, then it needs to redirected to a error file and in console. Also both error and output to be redirected to a log file. But i am facing the below error.
#! /bin/sh
errExit ()
{
errMsg=`cat... (1 Reply)
08-13-2012
fmthard error
