sudo file in sco unix Post: 302683661

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

SCO TCP/IP runtime System for SCO Unix

Hi everyone i have a question for all of you. It may be basic or it may be a good one. I recently aquired a copy of "SCO TCP/IP runtime System for SCO Unix" (thats what the disks say) and for the life of me i can not get it to load. i have tried opening the disk in linux and it can not determine...

2. SCO

how can I create a dos file in sco unix?

I want to output something to file1. And I want to see it in windows xp would you tell me how?

3. Filesystems, Disks and Memory

Unix Sco Open Server, Windows Computers Problem Access Unix Shared Files Help!!!!!

Hello Moto I hope someone can help We's here at work, have a unix box with sco openserver 5 on it, so it has a nice gui interface.. and also a fair few windows computers.. a system admin guy b4 me, has set up a user called neil, which can, when u try to access the unix box using windows...

4. UNIX for Dummies Questions & Answers

Print a Graphics File using a SCO Unix Command

I'm using SCO_SV release 3.2v5.0.7 and would like to know how to print a Graphics file (a .tif file) to a HPLaserJet printer using a SCO unix command. I've used nothing but the 'lp' command to print reports to different printers. (I found an answer, I did a find for tiff* and came up with the...

5. SCO

load sco xenix and sco unix binary ?

Hi I have some sco xenix object, bin and archive files that operate in sco unix 5.0.7. I know that sco unix kernel can support sco xenix binary. I want to know how can I link xenix and unix archives together?

6. Solaris

how to config sudo in unix boxes

Hi How to configure sudo in all unix boxes. plz provide the step by step process. Regards Praveen

7. SCO

sco unix backward compatibility on "max open file per process"

Hi How to increase maximum number of open file in "sco xenix binary" running in "sco unix openserver 5.0.7" ? I have changed "NOFILES" kernel parameter to 512, but xenix binray can't open more than 60. tnx

8. SCO

Sco Unix HFS file system error

HI, I have sco unix server currently i am trying to boot its not booting and giving error as HTFS error message contains - Warning : can not identify block 496 for i number 438 on HTFS dev hd (1/42). Warning : exit - /etc/init (PID 1) died, status 0x0000008B server is not getting boot...

9. SCO

Sco unix 5.0 copy file to pen drive

I have a server unix Sco 5.0 and copy some backup files to flopy drive using command "Tar", but i like copy this files to pen drive, is possible ? my know about Sco is less. Tks

10. UNIX for Dummies Questions & Answers

Error UNIX: UNIX SCO release 5.05 system does not boot

UNIX sco release 5.05 system does not boot:cannot open device hd(40)/boot stage 1 boot failure: error loading hd(40)/bootWhat to do?

LEARN ABOUT SUSE

pcilib

pcilib(7)							 The PCI Utilities							 pcilib(7)

NAME

       pcilib - a library for accessing PCI devices

DESCRIPTION

       The PCI library (also known as pcilib and libpci) is a portable library for accessing PCI devices and their configuration space.

ACCESS METHODS

       The  library supports a variety of methods to access the configuration space on different operating systems. By default, the first matching
       method in this list is used, but you can specify override the decision (see the -A switch of lspci).

       linux-sysfs
	      The /sys filesystem on Linux 2.6 and newer. The standard header of the config space is available to all  users,  the  rest  only	to
	      root.  Supports  extended  configuration	space,	PCI domains, VPD (from Linux 2.6.26), physical slots (also since Linux 2.6.26) and
	      information on attached kernel drivers.

       linux-proc
	      The /proc/bus/pci interface supported by Linux 2.1 and newer. The standard header of the config space is available to all users, the
	      rest only to root.

       intel-conf1
	      Direct  hardware	access	via Intel configuration mechanism 1. Available on i386 and compatibles on Linux, Solaris/x86, GNU Hurd and
	      Windows. Requires root privileges.

       intel-conf2
	      Direct hardware access via Intel configuration mechanism 2. Available on i386 and compatibles on Linux, Solaris/x86,  GNU  Hurd  and
	      Windows.	Requires  root privileges. Warning: This method is able to address only the first 16 devices on any bus and it seems to be
	      very unreliable in many cases.

       fbsd-device
	      The /dev/pci device on FreeBSD. Requires root privileges.

       aix-device
	      Access method used on AIX. Requires root privileges.

       nbsd-libpci
	      The /dev/pci0 device on NetBSD accessed using the local libpci library.

       obsd-device
	      The /dev/pci device on OpenBSD. Requires root privileges.

       dump   Read the contents of configuration registers from a file specified in the dump.name parameter. The format corresponds to the  output
	      of lspci -x.

PARAMETERS

       The library is controlled by several parameters. They should have sensible default values, but in case you want to do something unusual (or
       even something weird), you can override them (see the -O switch of lspci).

   Parameters of specific access methods
       dump.name
	      Name of the bus dump file to read from.

       fbsd.path
	      Path to the FreeBSD PCI device.

       nbsd.path
	      Path to the NetBSD PCI device.

       obsd.path
	      Path to the OpenBSD PCI device.

       proc.path
	      Path to the procfs bus tree.

       sysfs.path
	      Path to the sysfs device tree.

   Parameters for resolving of ID's via DNS
       net.domain
	      DNS domain containing the ID database.

       net.cache_name
	      Name of the file used for caching of resolved ID's.

SEE ALSO

       lspci(8), setpci(8), update-pciids(8)

AUTHOR

       The PCI Utilities are maintained by Martin Mares <mj@ucw.cz>.

pciutils-3.1.7							  31 January 2010							 pcilib(7)