How to find the SAN path? Post: 302680531

10 More Discussions You Might Find Interesting

1. Solaris

Thoughts/experiences of SAN attaching V880 to EMC SAN

Hi everyone, I wonder if I can canvas any opinions or thoughts (good or bad) on SAN attaching a SUN V880/490 to an EMC Clarion SAN? At the moment the 880 is using 12 internal FC-AL disks as a db server and seems to be doing a pretty good job. It is not I/O, CPU or Memory constrained and the...

2. Solaris

2 x HBA, connected to a SAN, but no Multi path software - What happens ?

Hi there Now, Ive always support servers that used multi path software with dual cards, e.g. powerpath (emc ) / MPXIO. I got asked a question today, that if a solaris 8/9/10 host had 2 HBA cards, but no multipathing software, what would happen ?? Does the HBA card with the highest id on the...

3. AIX

can't find a LTO3 drive through SAN,pls help!

Hi,everyone the situation is: at the very beginning ,through cfgmgr i find all LTO3 drives and 9840D drives. Then, some guy changed the device id(loop id) of all the stk drives on the tape lib panel. This time, i ran the cfgmgr but got nothing. so i asked that guy to change the loop id...

4. AIX

How to find the status of SAN Disc through command prompt

5. AIX

Find information for Host and SAN disconnect

Can someone point me in the right direction as to where I can find information on how to cleanly disconnect my AIX 5.3 host from our DS/4200 SAN. I have to do a firmware upgrade on the SAN. -Thanks

6. Solaris

Find Brocade SAN switch�s IP in Sun server?

We have a Sun M5000 connecting to a Brocade SAN switch. I don't know the IP of the Brocade switch and don't want to use its serial port to get the info. How can I find the IP of the Brocade switch under Solaris 10? Snoop is not supported by Solaris multipathing. What other tools can I use to find...

7. UNIX for Advanced & Expert Users

Shell script to check the SAN dual path.

Hello, I would like to create a shell script which would check whether the hosts have SAN dual path or not. If yes, then I should get a success message, else should get a list of hosts on which SAN dual path is not working. Thanks..

8. Shell Programming and Scripting

"find . -printf" without prepended "." path? Getting path to current working directory?

If I enter (simplified): find . -printf "%p\n" then all files in the output are prepended by a "." like ./local/share/test23.log How can achieve that a.) the leading "./" is omitted and/or b.) the full path to the current directory is inserted (enclosed by brackets and a blank)...

9. Linux

How to Find out if an HP/Linux uses SAN or not?

Is there a command I can run on my HP /LINUX to see if uses SAN? This command work son AIX ls -al /DEV/rdsk however it does not work on HP Linux. Please let me know? Thanks

10. Filesystems, Disks and Memory

Faster way: SAN hd to SAN hd copying

hi! i got a rhel 6.3 host that already have an xfs filesystem mounted from a SAN (let's call it SAN-1) whose size is 9TB. i will be receiving another SAN (let's call it SAN-2) storage of 15TB size. this new addition is physically on another SAN storage. SAN-1 is on a Pillar storage while the new...

LEARN ABOUT HPUX

symlink

symlink(4)						     Kernel Interfaces Manual							symlink(4)

NAME

       symlink - symbolic link

DESCRIPTION

       A symbolic (or soft ) link is a file whose name indirectly refers (points) to a relative or absolute path name.

       During  path  name  interpretation,  a symbolic link to a relative path name is expanded to the path name being interpreted, and a symbolic
       link to an absolute path name is replaced with the path name being interpreted.

       Thus, given the path name

	      If is a symbolic link to a relative path name such as the path name is interpreted as

	      If is a symbolic link to an absolute path name such as the path name is interpreted as

       All symbolic links are interpreted in this manner, with one exception: when the symbolic link is the last component of a path name,  it	is
       passed  as  a  parameter  to  one of the system calls: or (see readlink(2), rename(2), symlink(2), unlink(2), chown(2) and lstat(2)).  With
       these calls, the symbolic link, itself, is accessed or affected.

       Unlike normal (hard) links, a symbolic link can refer to any arbitrary path name and can span different logical devices (volumes).

       The path name can be that of any type of file (including a directory or another symbolic link), and may be invalid if no such  path  exists
       in  the	system.   (It is possible to make symbolic links point to themselves or other symbolic links in such a way that they form a closed
       loop.  The system detects this situation by limiting the number of symbolic links it traverses while translating a path name.)

       The mode and ownership of a symbolic link is ignored by the system, which means that affects the actual file, but not the  file	containing
       the symbolic link (see chmod(1)).

       Symbolic links can be created using or (see ln(1) and symlink(2)).

AUTHOR

       was developed by HP and the University of California, Berkeley.

SEE ALSO

       cp(1), symlink(2), readlink(2), link(2), stat(2), mknod(1M).

																	symlink(4)

10 More Discussions You Might Find Interesting

1. Solaris

Thoughts/experiences of SAN attaching V880 to EMC SAN

Discussion started by: si_linux

2. Solaris

2 x HBA, connected to a SAN, but no Multi path software - What happens ?

Discussion started by: sbk1972

3. AIX

can't find a LTO3 drive through SAN,pls help!

Discussion started by: zzisking

4. AIX

How to find the status of SAN Disc through command prompt

Discussion started by: AIXlearner