07-30-2012
Lan card not reaching Gateway
Hi,
I have this problem on RHEL box. I am using two NIC's of same model and make (Intel 82557) in the adjacent PCI slots . I am using each one for different subnet and have assigned them ipaddresses and gateways of respective subnets . While one is O.K. connecting to its gateway other don't. I have checked this card in Winows and its working fine. Card is not faulty. Problem only starts in RHEL.
ip1 192.168.14.2 -----> gateway 192.168.14.1
ip2 172.16.18.3 --X--> gateway 172.16.18.1
Any help is aprreciated.
Thanks,
Dexter
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
The Lan card in one of our UIII WS's seem doesn't work,so with ping command i can not see any of the machines in LAN and with some other tests i'm sure it's not OK.
I tried to use the second card on PCI port ,but the replaced card was one of the ordinary card for PC's ...by the way after... (1 Reply)
Discussion started by: nikk
1 Replies
2. Cybersecurity
what is lan card autonegotiation ?
how to enable and disable this feature? (2 Replies)
Discussion started by: nabil_boussetta
2 Replies
3. SCO
Dear all
Im facing one problem in SCO 5.0.5 , its that in the server there are three LAN cards INTEL PRO 100 series but when we configure all the three cards then LAN stops working . self ping is possible but no one can ping the server. If we remove driver of any one card LAN starts working.
Is... (1 Reply)
Discussion started by: ccvyas
1 Replies
4. Solaris
Hi,
i have a RealTek Lan Card on my machine. Does Solaris 9 supports this lan card .
Thank You,
Shafi (3 Replies)
Discussion started by: sol8admin
3 Replies
5. SCO
hi all
i have installed SCO 5.0.5 on a "Netfinity 5000" IBM server. But the OS is not detecting the lan card. how can i detect it.... help and thanks in advance .
bidhayak (3 Replies)
Discussion started by: bidhayakm
3 Replies
6. Programming
Please tell me API in Solaris / Linux / UNIX to get status information of LAN card. (1 Reply)
Discussion started by: mansoorulhaq
1 Replies
7. Linux
Hi.
I have a lan card installed on my server. I want to check the duplex speed of it. How can I check it?
Help is appreciated.
Thank you. (3 Replies)
Discussion started by: Amol21
3 Replies
8. Solaris
Hi,
I've recently moved my pci LAN card from Slot2 Slot5 on my sun x4270_m2 server (solaris 10).
I've done the touch / reconfigure and devfsadm, however my issue is that im able to configure the e1000g7 port with an ip address (192.168.0.1) but if i plug my laptop (set with static ip... (7 Replies)
Discussion started by: kerrygold
7 Replies
9. Red Hat
we have red hat 6 linux box
There are two lan card
one lan card eth0 have ip 10.82.190.31/24 GW 10.82.190.254
2th lan card eth1 have ip 10.82.188.33/24 GW 10.82.188.254
I have below route ... I use two route table
root@xxx# netstat -rn
Kernel IP routing table
Destination Gateway ... (5 Replies)
Discussion started by: chuikingman
5 Replies
10. UNIX for Beginners Questions & Answers
Dear friends
I use RedHat 6.5, which sets the gateway in the configuration file / etc / sysconfig / network as GATEWAY = 192.168.1.26, and the gateway in the configuration file / etc / sysconfig / network-scripts / ifcfg-eth11 as GATEWAY = 192.168.1.256. The two gateways are different.... (6 Replies)
Discussion started by: tanpeng
6 Replies
LEARN ABOUT DEBIAN
net::subnets
Net::Subnets(3pm) User Contributed Perl Documentation Net::Subnets(3pm)
NAME
Net::Subnets - Computing Subnets In Large Scale Networks
SYNOPSIS
use Net::Subnets;
my $sn = Net::Subnets->new;
$sn->subnets(@subnets);
if (my $subnetref = $sn->check($address)) {
...
}
my ($lowipref, highipref) = $sn->range($subnet);
my $listref = $sn->list(($lowipref, $highipref));
DESCRIPTION
Very fast matches large lists of IP addresses against many CIDR subnets and calculates IP address ranges.
This is a simple and efficient example for subnet matching:
use Net::Subnets;
my @subnets = qw(10.0.0.0/24 10.0.1.0/24);
my @addresses = qw/10.0.0.1 10.0.1.2 10.0.3.1/;
my $sn = Net::Subnets->new;
$sn->subnets(@subnets);
my $results;
foreach my $address (@addresses) {
if (my $subnetref = $sn->check($address)) {
$results .= "$address: $$subnetref
";
}
else {
$results .= "$address: not found
";
}
}
print($results);
This is a simple example for range calculation:
use Net::Subnets;
my @subnets = qw(10.0.0.0/24 10.0.1.0/24);
my $sn = Net::Subnets->new;
my $results;
foreach my $subnet (@subnets) {
my ($lowipref, $highipref) = $sn->range($subnet);
$results .= "$subnet: $$lowipref - $$highipref
";
}
print( $results );
This is a simple example for list generation:
use Net::Subnets;
my $lowip = '192.168.0.1';
my $highip = '192.168.0.100';
my $sn = Net::Subnets->new;
my $listref = $sn->list(($lowip, $highip));
foreach my $address (@$listref) {
# do something cool
}
METHODS
"new"
my $subnets = Net::Subnets->new;
Creates an "Net::Subnets" object.
"subnets"
$subnets->subnets([qw(10.0.0.0/24 10.0.1.0/24)]);
The C<subnets> method lets you prepare a list of CIDR subnets.
"check"
my $match = $subnets->check($address);
The C<check> method lets you check an IP address against the previously
prepared subnets.
"range"
my ($lowest, $highest) = $subnets->range($subnet)
The C<range> method lets you calculate the IP address range of a subnet.
"list"
my $list = $subnets->list($lowest, $highest);
The C<list> method lets you calculate a list containing all IP addresses
in a given range.
AUTHOR
Sebastian Riedel (sri@cpan.org), Juergen Peters (juergen.peters@taulmarill.de)
COPYRIGHT AND LICENSE
Copyright (C) 2003-2009, Sebastian Riedel.
This program is free software, you can redistribute it and/or modify it under the terms of the Artistic License version 2.0.
perl v5.10.1 2009-12-18 Net::Subnets(3pm)