07-30-2012
Lan card not reaching Gateway
Hi,
I have this problem on RHEL box. I am using two NIC's of same model and make (Intel 82557) in the adjacent PCI slots . I am using each one for different subnet and have assigned them ipaddresses and gateways of respective subnets . While one is O.K. connecting to its gateway other don't. I have checked this card in Winows and its working fine. Card is not faulty. Problem only starts in RHEL.
ip1 192.168.14.2 -----> gateway 192.168.14.1
ip2 172.16.18.3 --X--> gateway 172.16.18.1
Any help is aprreciated.
Thanks,
Dexter
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
The Lan card in one of our UIII WS's seem doesn't work,so with ping command i can not see any of the machines in LAN and with some other tests i'm sure it's not OK.
I tried to use the second card on PCI port ,but the replaced card was one of the ordinary card for PC's ...by the way after... (1 Reply)
Discussion started by: nikk
1 Replies
2. Cybersecurity
what is lan card autonegotiation ?
how to enable and disable this feature? (2 Replies)
Discussion started by: nabil_boussetta
2 Replies
3. SCO
Dear all
Im facing one problem in SCO 5.0.5 , its that in the server there are three LAN cards INTEL PRO 100 series but when we configure all the three cards then LAN stops working . self ping is possible but no one can ping the server. If we remove driver of any one card LAN starts working.
Is... (1 Reply)
Discussion started by: ccvyas
1 Replies
4. Solaris
Hi,
i have a RealTek Lan Card on my machine. Does Solaris 9 supports this lan card .
Thank You,
Shafi (3 Replies)
Discussion started by: sol8admin
3 Replies
5. SCO
hi all
i have installed SCO 5.0.5 on a "Netfinity 5000" IBM server. But the OS is not detecting the lan card. how can i detect it.... help and thanks in advance .
bidhayak (3 Replies)
Discussion started by: bidhayakm
3 Replies
6. Programming
Please tell me API in Solaris / Linux / UNIX to get status information of LAN card. (1 Reply)
Discussion started by: mansoorulhaq
1 Replies
7. Linux
Hi.
I have a lan card installed on my server. I want to check the duplex speed of it. How can I check it?
Help is appreciated.
Thank you. (3 Replies)
Discussion started by: Amol21
3 Replies
8. Solaris
Hi,
I've recently moved my pci LAN card from Slot2 Slot5 on my sun x4270_m2 server (solaris 10).
I've done the touch / reconfigure and devfsadm, however my issue is that im able to configure the e1000g7 port with an ip address (192.168.0.1) but if i plug my laptop (set with static ip... (7 Replies)
Discussion started by: kerrygold
7 Replies
9. Red Hat
we have red hat 6 linux box
There are two lan card
one lan card eth0 have ip 10.82.190.31/24 GW 10.82.190.254
2th lan card eth1 have ip 10.82.188.33/24 GW 10.82.188.254
I have below route ... I use two route table
root@xxx# netstat -rn
Kernel IP routing table
Destination Gateway ... (5 Replies)
Discussion started by: chuikingman
5 Replies
10. UNIX for Beginners Questions & Answers
Dear friends
I use RedHat 6.5, which sets the gateway in the configuration file / etc / sysconfig / network as GATEWAY = 192.168.1.26, and the gateway in the configuration file / etc / sysconfig / network-scripts / ifcfg-eth11 as GATEWAY = 192.168.1.256. The two gateways are different.... (6 Replies)
Discussion started by: tanpeng
6 Replies
pcilib(7) The PCI Utilities pcilib(7)
NAME
pcilib - a library for accessing PCI devices
DESCRIPTION
The PCI library (also known as pcilib and libpci) is a portable library for accessing PCI devices and their configuration space.
ACCESS METHODS
The library supports a variety of methods to access the configuration space on different operating systems. By default, the first matching
method in this list is used, but you can specify override the decision (see the -A switch of lspci).
linux-sysfs
The /sys filesystem on Linux 2.6 and newer. The standard header of the config space is available to all users, the rest only to
root. Supports extended configuration space, PCI domains, VPD (from Linux 2.6.26), physical slots (also since Linux 2.6.26) and
information on attached kernel drivers.
linux-proc
The /proc/bus/pci interface supported by Linux 2.1 and newer. The standard header of the config space is available to all users, the
rest only to root.
intel-conf1
Direct hardware access via Intel configuration mechanism 1. Available on i386 and compatibles on Linux, Solaris/x86, GNU Hurd and
Windows. Requires root privileges.
intel-conf2
Direct hardware access via Intel configuration mechanism 2. Available on i386 and compatibles on Linux, Solaris/x86, GNU Hurd and
Windows. Requires root privileges. Warning: This method is able to address only the first 16 devices on any bus and it seems to be
very unreliable in many cases.
fbsd-device
The /dev/pci device on FreeBSD. Requires root privileges.
aix-device
Access method used on AIX. Requires root privileges.
nbsd-libpci
The /dev/pci0 device on NetBSD accessed using the local libpci library.
obsd-device
The /dev/pci device on OpenBSD. Requires root privileges.
dump Read the contents of configuration registers from a file specified in the dump.name parameter. The format corresponds to the output
of lspci -x.
PARAMETERS
The library is controlled by several parameters. They should have sensible default values, but in case you want to do something unusual (or
even something weird), you can override them (see the -O switch of lspci).
Parameters of specific access methods
dump.name
Name of the bus dump file to read from.
fbsd.path
Path to the FreeBSD PCI device.
nbsd.path
Path to the NetBSD PCI device.
obsd.path
Path to the OpenBSD PCI device.
proc.path
Path to the procfs bus tree.
sysfs.path
Path to the sysfs device tree.
Parameters for resolving of ID's via DNS
net.domain
DNS domain containing the ID database.
net.cache_name
Name of the file used for caching of resolved ID's.
SEE ALSO
lspci(8), setpci(8), update-pciids(8)
AUTHOR
The PCI Utilities are maintained by Martin Mares <mj@ucw.cz>.
pciutils-3.1.7 31 January 2010 pcilib(7)