Dear All
I tried to follow the instruction in this link:
http://multiboot.solaris-x86.org/v/2.html
I created all these partitions as mentioned in the link above by using partition commander 9
Fist stage:
I installed XP in first partition (hda1)....success.
Second stage:
Install... (0 Replies)
Hi,
Can anyone advise me on how to use array on Bash? I am really confuse in how eval is link to array... What i wan to do is let say i have an index of an array of 50. Store either 'N' or 'Y' or "NA" in each index. how to i go about doing it.. then lastly how to i print all the values out in... (2 Replies)
Hi,
Would like to ask the experts if anyone knows how to run a script like this:
dtterm -title shell1
run process1 on shell1
dtterm -title shell2
run process2 on shell2
cheers!
p/s: sorry if i used the wrong forum, quite concussed after watching world cup for several nights; but I... (2 Replies)
In my cronjob, I would like to schedule my script.sh to run every minutes. I crontab -e and have in line below but it didn't seems to run at all.
* * * * * script.sh
When I run it manually, I can run it. Is that anything wrong with the above line?
If I change it to something like below,... (4 Replies)
how to run an already developed script run against a list of ip addresses solaris 8 question.
the script goes away and check traffic information, for example
check_GE-VLANStats-P3 1.1.1.1
and returns the results ok.
how do I run this against an ip list? i.e a list of 30 ip addresses (26 Replies)
If I run 'who -u' interactively or from a script invoked through bash in a tty on my Ubuntu 12LTS box I get an output like this:
testuser pts/0 Dec 9 02:32 . 2163 (host.xx.yy)
running the same through cron I get:
testuser pts/0 2012-12-09 02:32 00:05 2163... (2 Replies)
Hello all,
I'm trying to write a script to gather and send data and it works just fine at the bash command line, but when executing from CRON, it does not run properly.
My scripting skills are pretty limited and there's probably a better way, but as I said it works at the command line, but... (12 Replies)
I am from MQ/MB technology. My requirement is to display the queue manger and broker status on daily basis.
If I manually run the script, it works fine and displays output. But when I have scheduled the same using cronjobs it shows only the queue manger status and not the broker status.
Can... (3 Replies)
Linux System having all Perl, Python, PHP (and Ruby) installed
From a Shell script, can call a Perl, Python, PHP (or Ruby ?) file
eg
eg
a Shell script run in a case statement call to run a php file, also Perl or/and Python file???
Like
#!/usr/bin/bash
....
....
case $INPUT_STRING... (1 Reply)
Discussion started by: hoyanet
1 Replies
LEARN ABOUT HPUX
scsimgr_eschgr
scsimgr_eschgr(7) Miscellaneous Information Manual scsimgr_eschgr(7)NAME
scsimgr_eschgr - SCSI class driver eschgr plug-in for scsimgr
DESCRIPTION
The SCSI class driver plug-in for implements management and diagnostic operations specific to classes of devices bound to the driver. is
the native HP-UX SCSI class driver that handles, by default, all library/changer devices.
The plug-in handles the following operations for driver
o Display and clear driver global statistics and the statistics it maintains on instances of LUNs bound to it, and on related LUN paths.
o Display status and other information maintained by driver on LUNs bound to it.
o Get, set and save driver global and per-lun instance attributes.
Commands
The user can explicitly send the following commands to driver plug-in by specifying the
Clears statistics.
Displays information on attributes.
Displays status and other information.
Displays statistics.
Saves value of attributes in a persistent store.
Set current values of attributes.
Note: Refer to scsimgr(1M) for the syntax of the above commands.
However, the only instances where it is necessary to explicitly send a command to the plug-in is when performing operations on objects
global to driver global statistics, attributes or status information. In all the other cases, automatically invokes the plug-in to perform
the driver specific part of the operation, when the operation applies to LUNs bound to driver or to their LUN paths.
Attributes
The following table lists driver specific attributes. For details on the concept of attribute refer to scsimgr(1M).
Note: The following conventions are used:
o RO is Read Only.
o RW is Read Write.
o uint32 is unsigned 32 bits integer.
----------------------------------------------------------------
Object Attribute Name RO/RW Type Description
----------------------------------------------------------------
Global version RO string Version of driver
eschgr
----------------------------------------------------------------
LUN default_secs RW uint32 Timeout for all com-
mands not referenced
below.
Default: 30
----------------------------------------------------------------
move_secs RW uint32 Timeout for the move
command.
Default: 1200
----------------------------------------------------------------
readelem_secs RW uint32 Timeout for the read
element status command.
Default: 600
----------------------------------------------------------------
initelem_secs RW uint32 Timeout for the ini-
tialize element status
command.
Default: 600
----------------------------------------------------------------
readaddr_secs RW uint32 Timeout for modesense
0x1D command.
Default: 600
----------------------------------------------------------------
exchange_secs RW uint32 Timeout for the
exchange command.
Default: 600
----------------------------------------------------------------
I/O Load Balancing and Multi-Pathing Policies
The driver does not support load balancing and has minimal support for multi-pathing.
When the device is first opened after a system boot, a path is chosen and will remain fixed. If the path fails, the next open will pick a
new path.
EXAMPLES
To display plug-in general help and supported commands:
To get driver global statistics:
To clear driver global statistics:
To get driver global status information:
To display information about driver global attributes:
AUTHOR
SCSI class driver plug-in for was developed by HP.
SEE ALSO scsictl(1M), scsimgr(1M), autochanger(7), intro(7), scsi(7).
scsimgr_eschgr(7)