I'm trying to write a shell script to enter a bunch of loooooong configuration commands (to set ip, gateway etc.) for a quite outdated modem. It must be accessed via telnet. Here the preliminary code:
After the "open" command, I am asked a user name which is "Administrator", upon which I enter the modem terminal and have to put some 20 large commands ("modem command x") followed by ENTER. I can get as far as the modem terminal, but then the script just put the sequence of commands without ENTER:
A solution to a similar problem in this forum suggests to put "\r" in the script to simulate the ENTER key but in my case this would just add a plain "r" to the command line.
I would also be happy about a solution which allows to press the ENTER key manually during sleep time (if I do this now, it would just make a new line...)
I'm a scripting noob and also not too knowledgable about telnet so please bear with me thx in advance for any hint!
PS. I read about the EXPECT package but it's no option since a want to have a code that runs on various machines without prerequisites.
Hi!
I have a little prob with dialing up to the internet... When I try connect, it says "Sorry, modem is busy"...
Specs:
Laptop
56K modem
Slackware 8.0
Kernel 2.4.5
Cheers;) (4 Replies)
Ok. I tried following the directions from some of the other threads, but I've hit a road block.
I have red hat 7.3 and I installed the hcf package:
hcfpcimodem-0.99lnxtbeta03042700k2.4.18_3-1rh.i386.rpm
It installed ok, no errors, but I still can't get linux to find my modem. I've tried... (2 Replies)
Hello There,
I just wanted to know if there is any possible configuration for setting up my external USR USB Modem in Solaris 9 (x86). Any help is definitely appreciated.
Thanks
Khurram Bashir (1 Reply)
I have a serial modem connected to a usb port using an adapter cable. The system is a HP DL360. RedHat ES3.0
I am using the device /dev/ttyUSB0
When I issue the command "mgetty ttyUSB0" I get the following output in the log file.
How do I get the system to see the modem.
12/02 14:17:55... (2 Replies)
Somewhat long story:
I have a simple Perl CGI script that uses Expect to Telnet to a device and grab some data, and then spits it back to Perl for display on the Webpage.
This works for many devices I've tried, but one device just fails, it keeps rejecting the password on this device, only... (1 Reply)
Hello,
First of all, congratulations on this forum! Very mice material!
This is my fist thread and it has to do with connecting to an adsl modem and executing some commands.
Heres what I do:
$username = 'admin';
$passwd = 'admin';
$telnet = new Net::Telnet ( Timeout=>10,... (2 Replies)
I'm trying to learn how to get my script to execute the enter button when it telnets into a router and the router displays output but you need to press the space bar or enter button to continue displaying my output of the router.
How is this done? (0 Replies)
hi , every one
i wanaa to config tlenet server and did the steps to enable it
but when i try to connect to server this error show :
telnet : connect to address 10.0.0.100 : No route to host
telnet : Unable to connect to remote host : No route to host
... (6 Replies)
Hi,
I want to know the difference between these two services. Both are under xinetd. Both are used for enabling and disabling Telnet service. So, can somebody please explain me the difference between the two ?
Thanks in advance :) (0 Replies)
have three big data file, however I just need to see the mentioned below one line form the all the file which has SERVER_CONNECTION Value
File 1
export SERVER_CONNECTION=//dvlna002:10001/SmartServer
File2
export SERVER_CONNECTION=///SmartServer
File3
export... (1 Reply)
Discussion started by: Nsharma3006
1 Replies
LEARN ABOUT PHP
wedged
WEDGED(8) System Manager's Manual WEDGED(8)NAME
wedged - HylaFAX modem wedged script
SYNOPSIS
/var/spool/hylafax/bin/wedged devid device
DESCRIPTION
bin/wedged is the command script invoked by the facsimile server when a modem is deemed to be in an irreparable state and requires operator
intervention. This decision is based on the setting of the MaxSetupAttempts configuration parameter described in hylafax-config(5). The
default wedged script sends electronic mail to the FaxMaster alias. The interval at which emails are sent can be configured in the
etc/FaxDispatch file by setting the WEDGED_EMAIL_INTERVAL variable to the desired number of minutes (emails will be sent no more than every
WEDGED_EMAIL_INTERVAL minutes, until the wedged condition persists). If the variable WEDGED_DISABLE_FAXGETTY is set in etc/FaxDispatch
then the script will attempt to disable any faxgetty processes spawned by the init(8) process for the problematic modem. In addition the
faxq(8) process automatically disables use of the modem for servicing outbound jobs.
The devid argument is the identifier derived from the name of the modem's device file by substituting ``_'' characters for ``/'' charac-
ters; e.g. term_10 for /dev/term/10. The device argument is the name of the character special device associated with the modem.
If there exists an executable file /var/spool/hylafax/etc/resetmodem then that file will be executed upon execution of the wedged script in
an effort to recover the modem.
FILES
/usr/lib/sendmail for delivering mail
SEE ALSO faxq(8), hylafax-config(5)
October 3, 1995 WEDGED(8)
07-13-2012
thx in advance for any hint!