Sponsored Content
Operating Systems AIX Live Partition Mobility using HP XP SAN storage Post 302669493 by johnf on Wednesday 11th of July 2012 03:53:22 AM
Old 07-11-2012
Live Partition Mobility using HP XP SAN storage

I have a real problem that I hope someone has experience of. I am setting up an LPM for a client who use HP SAN storage. In the past when I setup an LPM system the second World Wide Name (WWN) for the virtual client adapters were given to the storage team who then zoned and mapped these to same LUNs as the first WWN, simple. However with this client the storage team reckon there is no way they can do this! This is because the only way to zone and map is to see the WWN on the GUI tool and attach that using the same GUI to the LUN! As the second WWN is always invisible until LPM is started I cannot "illuminate it" for the GUI to see.

The HP SAN storage model is XP24000.

I sincerely hope someone out there has experience of this problem.
 

9 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

Switching SAN storage

Hi, I have an existing SUN server that has a SAN storage installed on it. It also has softwares like Appwrox(scheduler), Taradata (database client), Samba Share and a few more installed on it. Now suppose that I have a new unix server server and i switch the same SAN store from the old unix... (1 Reply)
Discussion started by: myloginid
1 Replies

2. AIX

SAN storage and speed

I have 3 SAN disks of 1 TB each. Is it more efficient to make 1 large Volume group with multiple LV's or 3 Volume Groups with 1 LV each. The SAN disk is where all my backups will be dumped.:confused: (1 Reply)
Discussion started by: daveisme
1 Replies

3. Solaris

SAN Storage to solaris 10 server

Hi, I have configured our SAN Storage to be connected to our new SUN T5220. On the SAn it looks all fine on the server I do not see any connection: cfgadm -al Ap_Id Type Receptacle Occupant Condition c1 scsi-bus connected ... (4 Replies)
Discussion started by: manni2
4 Replies

4. Red Hat

how do we check SAN storage?

Hello, I am using LINUX OS. I want to check what is the SAN storage size. How do i check this in server? Any help is really appreciated.. (3 Replies)
Discussion started by: govindts
3 Replies

5. Solaris

Cannot see the IBM SAN storage

HI all, I had recently change the Server storage from EMC to the IBM SAN. but after the configuration, the IBM success to see the server HBA port and successfully assign a LUN for the server. When i go to the server, and restarted it. i use the "format" command to check, but din see any... (1 Reply)
Discussion started by: SmartAntz
1 Replies

6. UNIX for Dummies Questions & Answers

Storage from SAN

hi guys I installed Centos 5.5 (local disk). I am using 2 HBAs Now I mapped 5 LUNs from a Storage. I will be using LVM just to test I assigned a LUN I've read I have to use multipath to avoid my Centos see the LUN twice I enabled mdmpd and multipathd... something else I should do? ... (8 Replies)
Discussion started by: kopper
8 Replies

7. Solaris

SAN Storage for ASM

Hi, We are planning to setup a 10gR2 RAC and storage on ASM. We use Sun StorEdge SAN. The installation and configuration manual says to configure ASM diskgroups with raw devices (preferably raw disk not volumes). I dont really know if its possible to present raw disks to the Solaris... (4 Replies)
Discussion started by: esmgr
4 Replies

8. AIX

New to San Storage

Can anyone recommend a good book on san storage basics and how it communicates with an AIX server? (1 Reply)
Discussion started by: NycUnxer
1 Replies

9. AIX

Live Partition Mobility

Hello All, I recently did LPM at one of my client site, and thought of sharing it with the forum. I hope you find it helpful. (2 Replies)
Discussion started by: ibmtech
2 Replies
HTTP::Request::AsCGI(3pm)				User Contributed Perl Documentation				 HTTP::Request::AsCGI(3pm)

NAME
HTTP::Request::AsCGI - Set up a CGI environment from an HTTP::Request VERSION
version 1.2 SYNOPSIS
use CGI; use HTTP::Request; use HTTP::Request::AsCGI; my $request = HTTP::Request->new( GET => 'http://www.host.com/' ); my $stdout; { my $c = HTTP::Request::AsCGI->new($request)->setup; my $q = CGI->new; print $q->header, $q->start_html('Hello World'), $q->h1('Hello World'), $q->end_html; $stdout = $c->stdout; # environment and descriptors will automatically be restored # when $c is destructed. } while ( my $line = $stdout->getline ) { print $line; } DESCRIPTION
Provides a convenient way of setting up an CGI environment from an HTTP::Request. METHODS
new ( $request [, key => value ] ) Constructor. The first argument must be a instance of HTTP::Request, followed by optional pairs of environment key and value. environment Returns a hashref containing the environment that will be used in setup. Changing the hashref after setup has been called will have no effect. setup Sets up the environment and descriptors. restore Restores the environment and descriptors. Can only be called after setup. request Returns the request given to constructor. response Returns a HTTP::Response. Can only be called after restore. stdin Accessor for handle that will be used for STDIN, must be a real seekable handle with an file descriptor. Defaults to a tempoary IO::File instance. stdout Accessor for handle that will be used for STDOUT, must be a real seekable handle with an file descriptor. Defaults to a tempoary IO::File instance. stderr Accessor for handle that will be used for STDERR, must be a real seekable handle with an file descriptor. SEE ALSO
examples directory in this distribution. WWW::Mechanize::CGI Test::WWW::Mechanize::CGI THANKS TO
Thomas L. Shinnick for his valuable win32 testing. AUTHORS
Christian Hansen <ch@ngmedia.com> Hans Dieter Pearcey <hdp@cpan.org> COPYRIGHT AND LICENSE
This software is copyright (c) 2010 by Christian Hansen <ch@ngmedia.com>. This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself. perl v5.10.1 2010-01-12 HTTP::Request::AsCGI(3pm)
All times are GMT -4. The time now is 11:02 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy